[gradsusr] Display issues in Grads
Thomas Robinson
ter at hawaii.edu
Sat Jan 3 13:37:12 EST 2015
Aloha Marjahn,
When you installed grads, did you install the supplementary files? If you
didn't, then grads doesn't have any of the fonts to display the numbers or
values.
Go to http://www.iges.org/grads/downloads.html and scroll down to where it
says Supplementary Files. There is a file called data2.tar.gz that you
need to download from ftp://cola.gmu.edu/grads/data2.tar.gz (the link is on
the download site). Follow the directions and see if that fixes the
problem. You can put the 'setenv GADDIR' command in your .cshrc file (if
you're running C-shell).
-Tom
On Fri, Jan 2, 2015 at 4:23 PM, Marjahn Finlayson <mfinlayson at wesleyan.edu>
wrote:
> Hey Tom,
>
> I'm using grads 2.1 now. (I was using grads 2.0.2 before.)
> Here's my script:
>
> ga-> open rhsa.aso.ctl
>
>
> Scanning description file: rhsa.aso.ctl
> Data file rhsa.aso is open as file 1
> LON set to -179.375 104.375
> LAT set to -89.375 89.375
> LEV set to 1000 1000
> Time values set: 1979:1:1:0 1979:1:1:0
> E set to 1 1
>
> ga-> set gxout shaded
> ga-> d rh
> ga-> run cbarn
>
> After run the basemap script, I get the following picture as a result.
>
> On Wed, Dec 31, 2014 at 1:41 PM, Thomas Robinson <ter at hawaii.edu> wrote:
>
>> Aloha Marjahn,
>>
>> Can you post your entire script or list of commands so that we can see
>> what you're doing? Also, are you using grads or opengrads, and what
>> version are you using?
>>
>> -Tom
>>
>> On Tue, Dec 30, 2014 at 7:24 PM, Marjahn Finlayson <
>> mfinlayson at wesleyan.edu> wrote:
>>
>>> Thanks Thomas,
>>>
>>> I tried both solutions and neither worked. The numbers on the xlab and
>>> ylab are still not appearing. Even when I downloaded the new cbarn_black,
>>> the color was only outlined in black. The numerical values remained
>>> missing.
>>>
>>> Marjahn
>>>
>>>
>>> On Mon, Dec 29, 2014 at 4:33 PM, Thomas Robinson <ter at hawaii.edu> wrote:
>>>
>>>> Aloha Marjahn,
>>>>
>>>> The problem is you are using a white background with white letters and
>>>> numbers. There are two solutions:
>>>>
>>>> 1. Using the latest version of GrADS fixed this problem for me. When
>>>> I used opengrads, I had this problem.
>>>> 2. Use the following commands:
>>>> ** Set background to white
>>>>
>>>> 'set background 1'
>>>> ** Clear to get the white background
>>>>
>>>> 'clear'
>>>> *** Set strings to black
>>>> 'set string 0'
>>>> *** Set the map to black
>>>> 'set map 0'
>>>> *** Set the labels and title to black
>>>> 'set annot 0'
>>>>
>>>> As for the cbar script, you need to kinda do the same thing. I
>>>> attached a modified cbarn script (cbarn_black.gs) that changes the the
>>>> bar and numbers to black.
>>>>
>>>> I hope this is helpful! I included the text of the cbarn_black script
>>>> below.
>>>>
>>>> -Tom
>>>>
>>>> *
>>>>
>>>> * Script to plot a colorbar
>>>>
>>>> *
>>>>
>>>> * The script will assume a colorbar is wanted even if there is
>>>>
>>>> * not room -- it will plot on the side or the bottom if there is
>>>>
>>>> * room in either place, otherwise it will plot along the bottom and
>>>>
>>>> * overlay labels there if any. This can be dealt with via
>>>>
>>>> * the 'set parea' command. In version 2 the default parea will
>>>>
>>>> * be changed, but we want to guarantee upward compatibility in
>>>>
>>>> * sub-releases.
>>>>
>>>> *
>>>>
>>>> *
>>>>
>>>> * modifications by mike fiorino 940614
>>>>
>>>> *
>>>>
>>>> * - the extreme colors are plotted as triangles
>>>>
>>>> * - the colors are boxed in white
>>>>
>>>> * - input arguments in during a run execution:
>>>>
>>>> *
>>>>
>>>> * run cbarn sf vert xmid ymid
>>>>
>>>> *
>>>>
>>>> * sf - scale the whole bar 1.0 = original 0.5 half the size, etc.
>>>>
>>>> * vert - 0 FORCES a horizontal bar = 1 a vertical bar
>>>>
>>>> * xmid - the x position on the virtual page the center the bar
>>>>
>>>> * ymid - the x position on the virtual page the center the bar
>>>>
>>>> *
>>>>
>>>> * if vert,xmid,ymid are not specified, they are selected
>>>>
>>>> * as in the original algorithm
>>>>
>>>> *
>>>>
>>>>
>>>> function colorbar (args)
>>>>
>>>>
>>>> sf=subwrd(args,1)
>>>>
>>>> vert=subwrd(args,2)
>>>>
>>>> xmid=subwrd(args,3)
>>>>
>>>> ymid=subwrd(args,4)
>>>>
>>>>
>>>> if(sf='');sf=1.0;endif
>>>>
>>>>
>>>> *
>>>>
>>>> * Check shading information
>>>>
>>>> *
>>>>
>>>> 'query shades'
>>>>
>>>> shdinfo = result
>>>>
>>>> if (subwrd(shdinfo,1)='None')
>>>>
>>>> say 'Cannot plot color bar: No shading information'
>>>>
>>>> return
>>>>
>>>> endif
>>>>
>>>>
>>>> *
>>>>
>>>> * Get plot size info
>>>>
>>>> *
>>>>
>>>> 'query gxinfo'
>>>>
>>>> rec2 = sublin(result,2)
>>>>
>>>> rec3 = sublin(result,3)
>>>>
>>>> rec4 = sublin(result,4)
>>>>
>>>> xsiz = subwrd(rec2,4)
>>>>
>>>> ysiz = subwrd(rec2,6)
>>>>
>>>> ylo = subwrd(rec4,4)
>>>>
>>>> xhi = subwrd(rec3,6)
>>>>
>>>> xd = xsiz - xhi
>>>>
>>>>
>>>> ylolim=0.6*sf
>>>>
>>>> xdlim1=1.0*sf
>>>>
>>>> xdlim2=1.5*sf
>>>>
>>>> barsf=0.8*sf
>>>>
>>>> yoffset=0.2*sf
>>>>
>>>> stroff=0.05*sf
>>>>
>>>> strxsiz=0.12*sf
>>>>
>>>> strysiz=0.13*sf
>>>>
>>>> *
>>>>
>>>> * Decide if horizontal or vertical color bar
>>>>
>>>> * and set up constants.
>>>>
>>>> *
>>>>
>>>> if (ylo<ylolim & xd<xdlim1)
>>>>
>>>> say "Not enough room in plot for a colorbar"
>>>>
>>>> return
>>>>
>>>> endif
>>>>
>>>> cnum = subwrd(shdinfo,5)
>>>>
>>>> *
>>>>
>>>> * logic for setting the bar orientation with user overides
>>>>
>>>> *
>>>>
>>>> if (ylo<ylolim | xd>xdlim1)
>>>>
>>>> vchk = 1
>>>>
>>>> if(vert = 0) ; vchk = 0 ; endif
>>>>
>>>> else
>>>>
>>>> vchk = 0
>>>>
>>>> if(vert = 1) ; vchk = 1 ; endif
>>>>
>>>> endif
>>>>
>>>> *
>>>>
>>>> * vertical bar
>>>>
>>>> *
>>>>
>>>>
>>>> if (vchk = 1 )
>>>>
>>>>
>>>> if(xmid = '') ; xmid = xhi+xd/2 ; endif
>>>>
>>>> xwid = 0.2*sf
>>>>
>>>> ywid = 0.5*sf
>>>>
>>>>
>>>>
>>>> xl = xmid-xwid/2
>>>>
>>>> xr = xl + xwid
>>>>
>>>> if (ywid*cnum > ysiz*barsf)
>>>>
>>>> ywid = ysiz*barsf/cnum
>>>>
>>>> endif
>>>>
>>>> if(ymid = '') ; ymid = ysiz/2 ; endif
>>>>
>>>> yb = ymid - ywid*cnum/2
>>>>
>>>> 'set string 0 l 5'
>>>>
>>>> vert = 1
>>>>
>>>>
>>>> else
>>>>
>>>>
>>>> *
>>>>
>>>> * horizontal bar
>>>>
>>>> *
>>>>
>>>>
>>>> ywid = 0.4
>>>>
>>>> xwid = 0.8
>>>>
>>>>
>>>> if(ymid = '') ; ymid = ylo/2-ywid/2 ; endif
>>>>
>>>> yt = ymid + yoffset
>>>>
>>>> yb = ymid
>>>>
>>>> if(xmid = '') ; xmid = xsiz/2 ; endif
>>>>
>>>> if (xwid*cnum > xsiz*barsf)
>>>>
>>>> xwid = xsiz*barsf/cnum
>>>>
>>>> endif
>>>>
>>>> xl = xmid - xwid*cnum/2
>>>>
>>>> 'set string 0 tc 5'
>>>>
>>>> vert = 0
>>>>
>>>> endif
>>>>
>>>>
>>>>
>>>> *
>>>>
>>>> * Plot colorbar
>>>>
>>>> *
>>>>
>>>>
>>>>
>>>> 'set strsiz 'strxsiz' 'strysiz
>>>>
>>>> num = 0
>>>>
>>>> while (num<cnum)
>>>>
>>>> rec = sublin(shdinfo,num+2)
>>>>
>>>> col = subwrd(rec,1)
>>>>
>>>> hi = subwrd(rec,3)
>>>>
>>>> if (vert)
>>>>
>>>> yt = yb + ywid
>>>>
>>>> else
>>>>
>>>> xr = xl + xwid
>>>>
>>>> endif
>>>>
>>>>
>>>> * Draw the left/bottom triangle
>>>>
>>>> if (num = 0)
>>>>
>>>> if(vert = 1)
>>>>
>>>> xm = (xl+xr)*0.5
>>>>
>>>> 'set line 'col
>>>>
>>>> 'draw polyf 'xl' 'yt' 'xm' 'yb' 'xr' 'yt' 'xl' 'yt
>>>>
>>>> 'set line 0 1 5'
>>>>
>>>> 'draw line 'xl' 'yt' 'xm' 'yb
>>>>
>>>> 'draw line 'xm' 'yb' 'xr' 'yt
>>>>
>>>> 'draw line 'xr' 'yt' 'xl' 'yt
>>>>
>>>> else
>>>>
>>>> ym = (yb+yt)*0.5
>>>>
>>>> 'set line 'col
>>>>
>>>> 'draw polyf 'xl' 'ym' 'xr' 'yb' 'xr' 'yt' 'xl' 'ym
>>>>
>>>> 'set line 0 1 5'
>>>>
>>>> 'draw line 'xl' 'ym' 'xr' 'yb
>>>>
>>>> 'draw line 'xr' 'yb' 'xr' 'yt
>>>>
>>>> 'draw line 'xr' 'yt' 'xl' 'ym
>>>>
>>>> endif
>>>>
>>>> endif
>>>>
>>>>
>>>> * Draw the middle boxes
>>>>
>>>> if (num!=0 & num!= cnum-1)
>>>>
>>>> 'set line 'col
>>>>
>>>> 'draw recf 'xl' 'yb' 'xr' 'yt
>>>>
>>>> 'set line 0 1 5'
>>>>
>>>> 'draw rec 'xl' 'yb' 'xr' 'yt
>>>>
>>>> endif
>>>>
>>>>
>>>> * Draw the right/top triangle
>>>>
>>>> if (num = cnum-1)
>>>>
>>>> if (vert = 1)
>>>>
>>>> 'set line 'col
>>>>
>>>> 'draw polyf 'xl' 'yb' 'xm' 'yt' 'xr' 'yb' 'xl' 'yb
>>>>
>>>> 'set line 0 1 5'
>>>>
>>>> 'draw line 'xl' 'yb' 'xm' 'yt
>>>>
>>>> 'draw line 'xm' 'yt' 'xr' 'yb
>>>>
>>>> 'draw line 'xr' 'yb' 'xl' 'yb
>>>>
>>>> else
>>>>
>>>> 'set line 'col
>>>>
>>>> 'draw polyf 'xr' 'ym' 'xl' 'yb' 'xl' 'yt' 'xr' 'ym
>>>>
>>>> 'set line 0 1 5'
>>>>
>>>> 'draw line 'xr' 'ym' 'xl' 'yb
>>>>
>>>> 'draw line 'xl' 'yb' 'xl' 'yt
>>>>
>>>> 'draw line 'xl' 'yt' 'xr' 'ym
>>>>
>>>> endif
>>>>
>>>> endif
>>>>
>>>>
>>>> * Put numbers under each segment of the color key
>>>>
>>>> if (num < cnum-1)
>>>>
>>>> if (vert)
>>>>
>>>> xp=xr+stroff
>>>>
>>>> 'draw string 'xp' 'yt' 'hi
>>>>
>>>> else
>>>>
>>>> yp=yb-stroff
>>>>
>>>> 'draw string 'xr' 'yp' 'hi
>>>>
>>>> endif
>>>>
>>>> endif
>>>>
>>>>
>>>> * Reset variables for next loop execution
>>>>
>>>> if (vert)
>>>>
>>>> yb = yt
>>>>
>>>> else
>>>>
>>>> xl = xr
>>>>
>>>> endif
>>>>
>>>> num = num + 1
>>>>
>>>> endwhile
>>>>
>>>> return
>>>> ****************************************
>>>>
>>>> On Mon, Dec 29, 2014 at 11:05 AM, Stephen McMillan <
>>>> smcmillan at planalytics.com> wrote:
>>>>
>>>>> Marjahn,
>>>>>
>>>>> The cbar script only does the color bar. It would help if you also
>>>>> included the portion of your script that sets up and generates the image,
>>>>> otherwise it's difficult to reproduce and evaluate your issue.
>>>>>
>>>>> Stephen Mc
>>>>>
>>>>> On Mon, Dec 29, 2014 at 3:18 PM, Marjahn Finlayson <
>>>>> mfinlayson at wesleyan.edu> wrote:
>>>>>
>>>>>> I normally would run cbar.gs script. I copied the script from the
>>>>>> grads library displayed below:
>>>>>>
>>>>>> *
>>>>>> * Script to plot a colorbar
>>>>>> *
>>>>>> * The script will assume a colorbar is wanted even if there is
>>>>>> * not room -- it will plot on the side or the bottom if there is
>>>>>> * room in either place, otherwise it will plot along the bottom and
>>>>>> * overlay labels there if any. This can be dealt with via
>>>>>> * the 'set parea' command. In version 2 the default parea will
>>>>>> * be changed, but we want to guarantee upward compatibility in
>>>>>> * sub-releases.
>>>>>> *
>>>>>> function colorbar (args)
>>>>>> *
>>>>>> * Check shading information
>>>>>> *
>>>>>> 'query shades'
>>>>>> shdinfo = result
>>>>>> if (subwrd(shdinfo,1)='None')
>>>>>> say 'Cannot plot color bar: No shading information'
>>>>>> return
>>>>>> endif
>>>>>> *
>>>>>> * Get plot size info
>>>>>> *
>>>>>> 'query gxinfo'
>>>>>> rec2 = sublin(result,2)
>>>>>> rec3 = sublin(result,3)
>>>>>> rec4 = sublin(result,4)
>>>>>> xsiz = subwrd(rec2,4)
>>>>>> ysiz = subwrd(rec2,6)
>>>>>> ylo = subwrd(rec4,4)
>>>>>> xhi = subwrd(rec3,6)
>>>>>> xd = xsiz - xhi
>>>>>> *
>>>>>> * Decide if horizontal or vertical color bar
>>>>>> * and set up constants.
>>>>>> *
>>>>>> if (ylo<0.6 & xd<1.0)
>>>>>> say "Not enough room in plot for a colorbar"
>>>>>> return
>>>>>> endif
>>>>>> cnum = subwrd(shdinfo,5)
>>>>>> if (ylo<0.6 | xd>1.5)
>>>>>> xl = xhi + xd/2 - 0.4
>>>>>> xr = xl + 0.2
>>>>>> xwid = 0.2
>>>>>> ywid = 0.5
>>>>>> if (ywid*cnum > ysiz*0.8)
>>>>>> ywid = ysiz*0.8/cnum
>>>>>> endif
>>>>>> ymid = ysiz/2
>>>>>> yb = ymid - ywid*cnum/2
>>>>>> 'set string 1 l 5'
>>>>>> vert = 1
>>>>>> else
>>>>>> ymid = ylo/2
>>>>>> yt = ymid + 0.2
>>>>>> yb = ymid
>>>>>> xmid = xsiz/2
>>>>>> xwid = 0.8
>>>>>> if (xwid*cnum > xsiz*0.8)
>>>>>> xwid = xsiz*0.8/cnum
>>>>>> endif
>>>>>> xl = xmid - xwid*cnum/2
>>>>>> 'set string 1 tc 5'
>>>>>> vert = 0
>>>>>> endif
>>>>>> *
>>>>>> * Plot colorbar
>>>>>> *
>>>>>> 'set strsiz 0.12 0.13'
>>>>>> num = 0
>>>>>> while (num<cnum)
>>>>>> rec = sublin(shdinfo,num+2)
>>>>>> col = subwrd(rec,1)
>>>>>> hi = subwrd(rec,3)
>>>>>> 'set line 'col
>>>>>> if (vert)
>>>>>> yt = yb + ywid
>>>>>> else
>>>>>> xr = xl + xwid
>>>>>> endif
>>>>>> 'draw recf 'xl' 'yb' 'xr' 'yt
>>>>>> if (num<cnum-1)
>>>>>> if (vert)
>>>>>> 'draw string '%(xr+0.05)%' 'yt' 'hi
>>>>>> else
>>>>>> 'draw string 'xr' '%(yb-0.05)%' 'hi
>>>>>> endif
>>>>>> endif
>>>>>> num = num + 1
>>>>>> if (vert); yb = yt;
>>>>>> else; xl = xr; endif;
>>>>>> endwhile
>>>>>>
>>>>>>
>>>>>> On Sun, Dec 28, 2014 at 9:45 PM, Stephen McMillan <
>>>>>> smcmillan at planalytics.com> wrote:
>>>>>>
>>>>>>> Yes, you should be able to do it for temperatures against time.
>>>>>>> Regarding your "issue with running the char"...it would help if you
>>>>>>> provided a sample of your script that has the issue, as well as the result
>>>>>>> (image and/or screen result). Otherwise, I would have to guess what you
>>>>>>> mean.
>>>>>>> Stephen
>>>>>>>
>>>>>>> On Sun, Dec 28, 2014 at 6:31 PM, <mfinlayson at wesleyan.edu> wrote:
>>>>>>>
>>>>>>>> I also have an issue with running the char. I can see the shaded
>>>>>>>> colors but not the numerical values that correspond with them.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Dec 28, 2014, at 1:41 PM, Stephen McMillan <
>>>>>>>> smcmillan at planalytics.com> wrote:
>>>>>>>>
>>>>>>>> Marjahn,
>>>>>>>> Are you trying to plot lat/lon labels, or something else? If
>>>>>>>> lat/lon, and you're using nps or sps projection, you won't get them. Use
>>>>>>>> 'set mproj latlon' instead. Otherwise, you can use 'draw string...'
>>>>>>>> function to draw them.
>>>>>>>> Stephen
>>>>>>>>
>>>>>>>> On Sun, Dec 28, 2014 at 1:26 PM, Marjahn Finlayson <
>>>>>>>> mfinlayson at wesleyan.edu> wrote:
>>>>>>>>
>>>>>>>>> Hey everyone,
>>>>>>>>>
>>>>>>>>> I'm trying to plot data in grads, but the numerical labels in the
>>>>>>>>> xlab and ylab do not appear whenever I create charts or maps.
>>>>>>>>> I've tried the 'set xlab on' function and nothing's happened.
>>>>>>>>> Help!
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> gradsusr mailing list
>>>>>>>>> gradsusr at gradsusr.org
>>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> gradsusr mailing list
>>>>>>>> gradsusr at gradsusr.org
>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> gradsusr mailing list
>>>>>>>> gradsusr at gradsusr.org
>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> gradsusr mailing list
>>>>>>> gradsusr at gradsusr.org
>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> gradsusr mailing list
>>>>>> gradsusr at gradsusr.org
>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> gradsusr mailing list
>>>>> gradsusr at gradsusr.org
>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Tom Robinson
>>>> Treasurer - Graduate Student Organization
>>>> Secretary - Student Athletic Fee Committee
>>>> Graduate Student - Department of Atmospheric Science
>>>>
>>>> _______________________________________________
>>>> gradsusr mailing list
>>>> gradsusr at gradsusr.org
>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>
>>>>
>>>
>>> _______________________________________________
>>> gradsusr mailing list
>>> gradsusr at gradsusr.org
>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>
>>>
>>
>>
>> --
>> Tom Robinson
>> Treasurer - Graduate Student Organization
>> Secretary - Student Athletic Fee Committee
>> Graduate Student - Department of Atmospheric Science
>> 732-718-2323
>>
>> _______________________________________________
>> gradsusr mailing list
>> gradsusr at gradsusr.org
>> http://gradsusr.org/mailman/listinfo/gradsusr
>>
>>
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
--
Tom Robinson
Treasurer - Graduate Student Organization
Secretary - Student Athletic Fee Committee
Graduate Student - Department of Atmospheric Science
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20150103/50ddae83/attachment-0001.html
More information about the gradsusr
mailing list