[gradsusr] Writing .ctl file
Charles Seman - NOAA Federal
charles.seman at noaa.gov
Tue Jul 29 12:24:22 EDT 2014
David,
Where did these two runscripts come from? How did you make them? Is
there an xml file? Did you use frerun? At GFDL, frerun + xml file
makes the job runscript, and the job runscript launches post-processing
also, depending on how the xml file is configured. I don't understand
why your model runscript doesn't do this as well. There is also a frepp
utility that can be used with the xml file after a run completes to make
a post-processing jobscript to do the regridding. It seems you have a
different system in place to run the model, and based on this, I would
advise contacting your modeling services department for further help
with this issue.
I hope this helps,
Chuck
On 07/28/2014 07:52 PM, David Stanfel wrote:
> Hello,
>
> I actually ran it on a westgrid system as a batch job with the command:
>
> qsub -l procs=90,pmem=2000mb,walltime=01:00:00 run_MOM_solo.pbs
>
>
> The file run_MOM_solo.pbs is attached as well as the MOM_run.csh file
> that it calls.
>
>
> Thanks,
>
>
> David
>
>
>
> On Mon, Jul 28, 2014 at 1:25 PM, Charles Seman - NOAA Federal
> <charles.seman at noaa.gov <mailto:charles.seman at noaa.gov>> wrote:
>
> David,
>
> How did you get the data? Did you run the GFDL model locally? If so,
> did you use "frerun" with an xml file? If so, there is a companion
> "frepp" command which can be used to post-process the history data.
> Could you provide more details on the source of your file?
>
> Thanks,
> Chuck
>
> On 07/26/2014 07:38 PM, David Stanfel wrote:
> > It is GFDL Model data using the Molecular Ocean Model MOM_solo type.
> > This is for the box1 test case. I did try sdfopen and it came out
> with
> > the following error message:
> >
> > Scanning self-describing file: 19800101.ocean_neutral.nc
> <http://19800101.ocean_neutral.nc>
> > <http://19800101.ocean_neutral.nc>
> >
> > SDF Error: 365 day calendars are no longer supported by sdfopen.
> >
> > To open this file with GrADS, use a descriptor file with
> >
> > a complete TDEF entry and OPTIONS 365_day_calendar.
> >
> >
> > I do not have any pp data and I don't know how to go about
> creating the
> > grid data. How could I do that, putting it into lat, long
> coordinates?
> >
> > Thanks,
> >
> > David
> >
> >
> > On Fri, Jul 25, 2014 at 2:39 PM, Charles Seman - NOAA Federal
> > <charles.seman at noaa.gov <mailto:charles.seman at noaa.gov>
> <mailto:charles.seman at noaa.gov <mailto:charles.seman at noaa.gov>>> wrote:
> >
> > David,
> >
> > This file looks like it's from a GFDL model? Based on the
> names of the
> > coordinates, and the global attributes "grid_type" and
> "grid_tile", it
> > looks like it is a "history" file which is on the model grid
> and has yet
> > to be regridded to a lat/lon grid. I'm not a user of the
> ocean data,
> > but am working with a GFDL history data file from the
> atmospheric model
> > on the cubed-sphere model grid tile4. Be very careful! The grid
> > coordinates xt_ocean and yt_ocean may need to be mapped into
> actual
> > global coordinates. To get a view of the data, have you
> tried opening
> > the file in GrADS without using a GrADS ctl file? GrADS is
> able to open
> > and view the tile4 file I'm working with, but one must be
> aware that the
> > map background that GrADS assigns is not physically correct.
> Can you
> > use post-processed "pp" data (if you have this, it should be
> in a "pp"
> > subdirectory)? These "pp" data have been put on a physical grid.
> > I talked with someone here at GFDL who works with ocean data,
> and he
> > says Ferret is able to open the datasets he works with...
> >
> > Here's an example of what's in a pp/ocean/ocean.static.nc
> <http://ocean.static.nc>
> > <http://ocean.static.nc> file. Note
> > how the tracer latitude and longitudes are functions of
> > yt_ocean,xt_ocean: geolat_t(yt_ocean,xt_ocean) and
> > geolon_t(yt_ocean,xt_ocean). So the lat and lon are themselves
> > functions of grid coordinate variables. Here's an example of
> > two-dimensional lat, lon coordinates:
> >
> http://cfconventions.org/Data/cf-convetions/cf-conventions-1.6/build/cf-conventions.html#idp5559280
> >
> > netcdf ocean.static {
> >
> > dimensions:
> >
> > xu_ocean = 360 ;
> >
> > yu_ocean = 200 ;
> >
> > xt_ocean = 360 ;
> >
> > yt_ocean = 200 ;
> >
> > variables:
> >
> > double xt_ocean(xt_ocean) ;
> >
> > xt_ocean:long_name = "tcell longitude" ;
> >
> > xt_ocean:units = "degrees_E" ;
> >
> > xt_ocean:cartesian_axis = "X" ;
> >
> > double yt_ocean(yt_ocean) ;
> >
> > yt_ocean:long_name = "tcell latitude" ;
> >
> > yt_ocean:units = "degrees_N" ;
> >
> > yt_ocean:cartesian_axis = "Y" ;
> >
> > double xu_ocean(xu_ocean) ;
> >
> > xu_ocean:long_name = "ucell longitude" ;
> >
> > xu_ocean:units = "degrees_E" ;
> >
> > xu_ocean:cartesian_axis = "X" ;
> >
> > double yu_ocean(yu_ocean) ;
> >
> > yu_ocean:long_name = "ucell latitude" ;
> >
> > yu_ocean:units = "degrees_N" ;
> >
> > yu_ocean:cartesian_axis = "Y" ;
> >
> > float ht(yt_ocean, xt_ocean) ;
> >
> > ht:long_name = "ocean depth on t-cells" ;
> >
> > ht:units = "m" ;
> >
> > ht:valid_range = -1.e+09f, 1.e+09f ;
> >
> > ht:missing_value = -1.e+20f ;
> >
> > ht:_FillValue = -1.e+20f ;
> >
> > ht:cell_methods = "time: point" ;
> >
> > ht:coordinates = "geolon_t geolat_t" ;
> >
> > ht:standard_name =
> "sea_floor_depth_below_geoid" ;
> >
> > float hu(yu_ocean, xu_ocean) ;
> >
> > hu:long_name = "ocean depth on u-cells" ;
> >
> > hu:units = "m" ;
> >
> > hu:valid_range = -1.e+09f, 1.e+09f ;
> >
> > hu:missing_value = -1.e+20f ;
> >
> > hu:_FillValue = -1.e+20f ;
> >
> > hu:cell_methods = "time: point" ;
> >
> > hu:coordinates = "geolon_c geolat_c" ;
> >
> > float geolat_c(yu_ocean, xu_ocean) ;
> >
> > geolat_c:long_name = "uv latitude" ;
> >
> > geolat_c:units = "degrees_N" ;
> >
> > geolat_c:valid_range = -91.f, 91.f ;
> >
> > geolat_c:missing_value = 1.e+20f ;
> >
> > geolat_c:_FillValue = 1.e+20f ;
> >
> > geolat_c:cell_methods = "time: point" ;
> >
> > geolat_c:coordinates = "geolon_c geolat_c" ;
> >
> > float geolon_c(yu_ocean, xu_ocean) ;
> >
> > geolon_c:long_name = "uv longitude" ;
> >
> > geolon_c:units = "degrees_E" ;
> >
> > geolon_c:valid_range = -281.f, 361.f ;
> >
> > geolon_c:missing_value = 1.e+20f ;
> >
> > geolon_c:_FillValue = 1.e+20f ;
> >
> > geolon_c:cell_methods = "time: point" ;
> >
> > geolon_c:coordinates = "geolon_c geolat_c" ;
> >
> > float geolat_t(yt_ocean, xt_ocean) ;
> >
> > geolat_t:long_name = "tracer latitude" ;
> >
> > geolat_t:units = "degrees_N" ;
> >
> > geolat_t:valid_range = -91.f, 91.f ;
> >
> > geolat_t:missing_value = 1.e+20f ;
> >
> > geolat_t:_FillValue = 1.e+20f ;
> >
> > geolat_t:cell_methods = "time: point" ;
> >
> > geolat_t:coordinates = "geolon_t geolat_t" ;
> >
> > float geolon_t(yt_ocean, xt_ocean) ;
> >
> > geolon_t:long_name = "tracer longitude" ;
> >
> > geolon_t:units = "degrees_E" ;
> >
> > geolon_t:valid_range = -281.f, 361.f ;
> >
> > geolon_t:missing_value = 1.e+20f ;
> >
> > geolon_t:_FillValue = 1.e+20f ;
> >
> > geolon_t:cell_methods = "time: point" ;
> >
> > geolon_t:coordinates = "geolon_t geolat_t" ;
> >
> > float area_t(yt_ocean, xt_ocean) ;
> >
> > area_t:long_name = "tracer cell area" ;
> >
> > area_t:units = "m^2" ;
> >
> > area_t:valid_range = 0.f, 1.e+15f ;
> >
> > area_t:missing_value = 1.e+20f ;
> >
> > area_t:_FillValue = 1.e+20f ;
> >
> > area_t:cell_methods = "time: point" ;
> >
> > area_t:coordinates = "geolon_t geolat_t" ;
> >
> > float area_u(yu_ocean, xu_ocean) ;
> >
> > area_u:long_name = "velocity cell area" ;
> >
> > area_u:units = "m^2" ;
> >
> > area_u:valid_range = 0.f, 1.e+15f ;
> >
> > area_u:missing_value = 1.e+20f ;
> >
> > area_u:_FillValue = 1.e+20f ;
> >
> > area_u:cell_methods = "time: point" ;
> >
> > area_u:coordinates = "geolon_c geolat_c" ;
> >
> > float kmt(yt_ocean, xt_ocean) ;
> >
> > kmt:long_name = "number of depth levels on
> t-grid" ;
> >
> > kmt:units = "dimensionless" ;
> >
> > kmt:valid_range = -10.f, 1.e+09f ;
> >
> > kmt:missing_value = -1.e+20f ;
> >
> > kmt:_FillValue = -1.e+20f ;
> >
> > kmt:cell_methods = "time: point" ;
> >
> > kmt:coordinates = "geolon_t geolat_t" ;
> >
> > float kmu(yu_ocean, xu_ocean) ;
> >
> > kmu:long_name = "number of depth levels on
> u-grid" ;
> >
> > kmu:units = "dimensionless" ;
> >
> > kmu:valid_range = -10.f, 1.e+09f ;
> >
> > kmu:missing_value = -1.e+20f ;
> >
> > kmu:_FillValue = -1.e+20f ;
> >
> > kmu:cell_methods = "time: point" ;
> >
> > kmu:coordinates = "geolon_c geolat_c" ;
> >
> > float geo_heat(yt_ocean, xt_ocean) ;
> >
> > geo_heat:long_name = "Geothermal heating" ;
> >
> > geo_heat:units = "W/m^2" ;
> >
> > geo_heat:valid_range = -10.f, 1000000.f ;
> >
> > geo_heat:missing_value = -1.e+20f ;
> >
> > geo_heat:_FillValue = -1.e+20f ;
> >
> > geo_heat:cell_methods = "time: point" ;
> >
> > geo_heat:coordinates = "geolon_t geolat_t" ;
> >
> > geo_heat:standard_name =
> > "upward_geothermal_heat_flux_at_sea_floor" ;
> >
> > float pbot0(yt_ocean, xt_ocean) ;
> >
> > pbot0:long_name = "reference bottom pressure
> > t-cells" ;
> >
> > pbot0:units = "dbar" ;
> >
> > pbot0:valid_range = -1.e+08f, 1.e+08f ;
> > pbot0:missing_value = -1.e+20f ;
> > pbot0:_FillValue = -1.e+20f ;
> > pbot0:cell_methods = "time: point" ;
> > pbot0:coordinates = "geolon_t geolat_t" ;
> >
> > // global attributes:
> > :NCX = "1.1.1" ;
> > }
> >
> > I hope this is helpful. I don't think I can be of much more
> help, but
> > hope this points you in the right direction.
> >
> > Chuck
> >
> > On 07/25/2014 12:26 AM, David Stanfel wrote:
> > > Hello,
> > >
> > > I decided to try a different file. Here is the ncdump -c
> of said
> > file:
> > >
> > > dstanfel:bin ninjawarrior343$ ncdump -c
> 19800101.ocean_neutral.nc <http://19800101.ocean_neutral.nc>
> > <http://19800101.ocean_neutral.nc>
> > > <http://19800101.ocean_neutral.nc>
> > >
> > > netcdf \19800101.ocean_neutral {
> > >
> > > dimensions:
> > >
> > > xt_ocean = 24 ;
> > >
> > > yt_ocean = 35 ;
> > >
> > > Time = UNLIMITED ; // (1 currently)
> > >
> > > nv = 2 ;
> > >
> > > st_ocean = 18 ;
> > >
> > > st_edges_ocean = 19 ;
> > >
> > > variables:
> > >
> > > double xt_ocean(xt_ocean) ;
> > >
> > > xt_ocean:long_name = "tcell longitude" ;
> > >
> > > xt_ocean:units = "degrees_E" ;
> > >
> > > xt_ocean:cartesian_axis = "X" ;
> > >
> > > double yt_ocean(yt_ocean) ;
> > >
> > > yt_ocean:long_name = "tcell latitude" ;
> > >
> > > yt_ocean:units = "degrees_N" ;
> > >
> > > yt_ocean:cartesian_axis = "Y" ;
> > >
> > > double Time(Time) ;
> > >
> > > Time:long_name = "Time" ;
> > >
> > > Time:units = "days since 1980-01-01 00:00:00" ;
> > >
> > > Time:cartesian_axis = "T" ;
> > >
> > > Time:calendar_type = "NOLEAP" ;
> > >
> > > Time:calendar = "NOLEAP" ;
> > >
> > > Time:bounds = "Time_bounds" ;
> > >
> > > double nv(nv) ;
> > >
> > > nv:long_name = "vertex number" ;
> > >
> > > nv:units = "none" ;
> > >
> > > nv:cartesian_axis = "N" ;
> > >
> > > double st_ocean(st_ocean) ;
> > >
> > > st_ocean:long_name = "tcell pstar" ;
> > >
> > > st_ocean:units = "dbars" ;
> > >
> > > st_ocean:cartesian_axis = "Z" ;
> > >
> > > st_ocean:positive = "down" ;
> > >
> > > st_ocean:edges = "st_edges_ocean" ;
> > >
> > > double st_edges_ocean(st_edges_ocean) ;
> > >
> > > st_edges_ocean:long_name = "tcell pstar edges" ;
> > >
> > > st_edges_ocean:units = "dbars" ;
> > >
> > > st_edges_ocean:cartesian_axis = "Z" ;
> > >
> > > st_edges_ocean:positive = "down" ;
> > >
> > > float agm(Time, yt_ocean, xt_ocean) ;
> > >
> > > agm:long_name = "GM diffusivity at surface" ;
> > >
> > > agm:units = "m^2/sec" ;
> > >
> > > agm:valid_range = -10.f, 1.e+10f ;
> > >
> > > agm:missing_value = -1.e+20f ;
> > >
> > > agm:_FillValue = -1.e+20f ;
> > >
> > > agm:cell_methods = "time: mean" ;
> > >
> > > agm:time_avg_info = "average_T1,average_T2,average_DT" ;
> > >
> > > agm:coordinates = "geolon_t geolat_t" ;
> > >
> > > agm:standard_name =
> "ocean_tracer_bolus_laplacian_diffusivity" ;
> > >
> > > float rossby(Time, yt_ocean, xt_ocean) ;
> > >
> > > rossby:long_name = "Rossby radius used in neutral physics" ;
> > >
> > > rossby:units = "m" ;
> > >
> > > rossby:valid_range = -10.f, 1.e+10f ;
> > >
> > > rossby:missing_value = -1.e+20f ;
> > >
> > > rossby:_FillValue = -1.e+20f ;
> > >
> > > rossby:cell_methods = "time: mean" ;
> > >
> > > rossby:time_avg_info = "average_T1,average_T2,average_DT" ;
> > >
> > > rossby:coordinates = "geolon_t geolat_t" ;
> > >
> > > float slope31(Time, st_ocean, yt_ocean, xt_ocean) ;
> > >
> > > slope31:long_name = "neutral slope -(rho_x/rho_z)" ;
> > >
> > > slope31:units = "dimensionless" ;
> > >
> > > slope31:valid_range = -1.e+10f, 1.e+10f ;
> > >
> > > slope31:missing_value = -1.e+20f ;
> > >
> > > slope31:_FillValue = -1.e+20f ;
> > >
> > > slope31:cell_methods = "time: mean" ;
> > >
> > > slope31:time_avg_info = "average_T1,average_T2,average_DT" ;
> > >
> > > slope31:coordinates = "geolon_t geolat_t" ;
> > >
> > > float slope32(Time, st_ocean, yt_ocean, xt_ocean) ;
> > >
> > > slope32:long_name = "neutral slope -(rho_y/rho_z)" ;
> > >
> > > slope32:units = "dimensionless" ;
> > >
> > > slope32:valid_range = -1.e+10f, 1.e+10f ;
> > >
> > > slope32:missing_value = -1.e+20f ;
> > >
> > > slope32:_FillValue = -1.e+20f ;
> > >
> > > slope32:cell_methods = "time: mean" ;
> > >
> > > slope32:time_avg_info = "average_T1,average_T2,average_DT" ;
> > >
> > > slope32:coordinates = "geolon_t geolat_t" ;
> > >
> > > double average_T1(Time) ;
> > >
> > > average_T1:long_name = "Start time for average period" ;
> > >
> > > average_T1:units = "days since 1980-01-01 00:00:00" ;
> > >
> > > average_T1:missing_value = 1.e+20 ;
> > >
> > > average_T1:_FillValue = 1.e+20 ;
> > >
> > > double average_T2(Time) ;
> > >
> > > average_T2:long_name = "End time for average period" ;
> > >
> > > average_T2:units = "days since 1980-01-01 00:00:00" ;
> > >
> > > average_T2:missing_value = 1.e+20 ;
> > >
> > > average_T2:_FillValue = 1.e+20 ;
> > >
> > > double average_DT(Time) ;
> > >
> > > average_DT:long_name = "Length of average period" ;
> > >
> > > average_DT:units = "days" ;
> > >
> > > average_DT:missing_value = 1.e+20 ;
> > >
> > > average_DT:_FillValue = 1.e+20 ;
> > >
> > > double Time_bounds(Time, nv) ;
> > >
> > > Time_bounds:long_name = "Time axis boundaries" ;
> > >
> > > Time_bounds:units = "days" ;
> > >
> > > Time_bounds:missing_value = 1.e+20 ;
> > >
> > > Time_bounds:_FillValue = 1.e+20 ;
> > >
> > >
> > > // global attributes:
> > >
> > > :filename = "ocean_neutral.nc <http://ocean_neutral.nc>
> <http://ocean_neutral.nc>
> > <http://ocean_neutral.nc>" ;
> > >
> > > :title = "MOM4 box" ;
> > >
> > > :grid_type = "regular" ;
> > >
> > > :grid_tile = "N/A" ;
> > >
> > > data:
> > >
> > >
> > > xt_ocean = 1.25, 3.75, 6.25, 8.75, 11.25, 13.75, 16.25,
> 18.75,
> > 21.25,
> > > 23.75,
> > >
> > > 26.25, 28.75, 31.25, 33.75, 36.25, 38.75, 41.25, 43.75,
> > 46.25, 48.75,
> > >
> > > 51.25, 53.75, 56.25, 58.75 ;
> > >
> > >
> > > yt_ocean = 1.25, 3.7488100528717, 6.2393012046814,
> > 8.71919345855713,
> > >
> > > 11.1815176010132, 13.6242818832397, 16.0408229827881,
> > > 18.4296073913574,
> > >
> > > 20.784387588501, 23.1042194366455, 25.3833503723145,
> > 27.6215190887451,
> > >
> > > 29.813497543335, 31.9597606658936, 34.0555992126465,
> > 36.1022338867188,
> > >
> > > 38.0954322814941, 40.0371551513672, 41.9235687255859,
> > > 43.7573394775391,
> > >
> > > 45.5349464416504, 47.259708404541, 48.9283294677734,
> > 50.5447235107422,
> > >
> > > 52.1057090759277, 53.6157531738281, 55.0716934204102,
> > > 56.4785079956055,
> > >
> > > 57.8329429626465, 59.1404571533203, 60.3976211547852,
> > > 61.6103477478027,
> > >
> > > 62.7749481201172, 63.8977813720703, 64.9748153686523 ;
> > >
> > >
> > > Time = 2 ;
> > >
> > >
> > > nv = 1, 2 ;
> > >
> > >
> > > st_ocean = 17.75025, 53.25075, 88.75125, 124.25175,
> 159.75225,
> > 195.25275,
> > >
> > > 230.75325, 266.25375, 314.34159289856, 399.171716592407,
> > >
> > > 541.922400494385, 759.079548358154, 1061.10117883301,
> > > 1451.56990550537,
> > >
> > > 1926.90292906494, 2476.64250944824, 3084.30280480957,
> > > 3728.70522619629 ;
> > >
> > >
> > > st_edges_ocean = 0, 35.5005, 71.001, 106.5015, 142.002,
> 177.5025,
> > > 213.003,
> > >
> > > 248.5035, 290.29765597229, 356.756654745483,
> 470.547043066406,
> > >
> > > 650.50097442627, 910.090332641602, 1256.33548026123,
> > 1689.23641728516,
> > >
> > > 2201.77290498047, 2780.47265712891, 3406.50401550293,
> > 4057.20024763184
> > >
> > >
> > > I wrote a .ctl file:
> > >
> > >
> > > DSET ^19800101.ocean_neutral.nc
> <http://19800101.ocean_neutral.nc>
> > <http://19800101.ocean_neutral.nc>
> <http://19800101.ocean_neutral.nc>
> > >
> > > UNDEF -9.99e8 missing_value
> > >
> > > DTYPE netcdf
> > >
> > > CACHESIZE 100000
> > >
> > > TITLE Sample Model Output
> > >
> > > XDEF 24 LINEAR 1.25 2.5
> > >
> > > YDEF 35 levels 1.25, 3.7488100528717, 6.2393012046814,
> > 8.71919345855713,
> > >
> > > 11.1815176010132, 13.6242818832397, 16.0408229827881,
> > > 18.4296073913574,
> > >
> > > 20.784387588501, 23.1042194366455, 25.3833503723145,
> > 27.6215190887451,
> > >
> > > 29.813497543335, 31.9597606658936, 34.0555992126465,
> > 36.1022338867188,
> > >
> > > 38.0954322814941, 40.0371551513672, 41.9235687255859,
> > > 43.7573394775391,
> > >
> > > 45.5349464416504, 47.259708404541, 48.9283294677734,
> > 50.5447235107422,
> > >
> > > 52.1057090759277, 53.6157531738281, 55.0716934204102,
> > > 56.4785079956055,
> > >
> > > 57.8329429626465, 59.1404571533203, 60.3976211547852,
> > > 61.6103477478027,
> > >
> > > 62.7749481201172, 63.8977813720703, 64.9748153686523
> > >
> > > ZDEF 18 levels 17.75025, 53.25075, 88.75125, 124.25175,
> 159.75225,
> > > 195.25275, 230.75327, 266.25375, 314.34159289856,
> 399.171716592407,
> > > 541.922400494385, 759.079548358154, 1061.10117883301,
> > 1451.56990550537,
> > > 1926.90292906494, 2476.64250944824, 3084.30280480957,
> > 3728.70522619629
> > >
> > > TDEF 1 LINEAR 01JAN0001 1mo
> > >
> > > VARS 4
> > >
> > > agm 0 t,y,x GM diffusivity at surface (m^2/sec)
> > >
> > > rossby 0 t,y,x Rossby radius used in neutral physics (m)
> > >
> > > slope31 18 t,z,y,x Neutral slope -(rho_x/rho_z)
> > >
> > > slope32 18 t,z,y,x Neutral slope -(rho_y/rho_z)
> > >
> > > ENDVARS
> > >
> > >
> > > When trying to display the variables, I get this error:
> > >
> > >
> > > ga-> d agm
> > >
> > > Cannot contour grid - all undefined values
> > >
> > > ga-> d rossby
> > >
> > > Cannot contour grid - all undefined values
> > >
> > > ga-> d slope31
> > >
> > > Cannot contour grid - all undefined values
> > >
> > > ga->
> > >
> > >
> > > What could be going wrong here?
> > >
> > > Thanks,
> > >
> > > David
> > >
> > >
> > > On Wed, Jul 23, 2014 at 11:23 AM, David Stanfel
> > <dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>
> <mailto:dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>>
> > > <mailto:dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>
> <mailto:dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>>>> wrote:
> > >
> > > Also, how do you determine the CACHESIZE?
> > >
> > > Thanks,
> > >
> > > David
> > >
> > >
> > > On Tue, Jul 22, 2014 at 11:05 PM, David Stanfel
> > > <dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>
> <mailto:dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>>
> > <mailto:dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>
> <mailto:dstanfel at ualberta.ca <mailto:dstanfel at ualberta.ca>>>> wrote:
> > >
> > > Hello,
> > >
> > > I just ran a climate model which produced some .nc
> files.
> > I am
> > > having trouble writing the .ctl file to read said
> .nc files.
> > > Here is the ncdump -c for one of the files I am
> trying to
> > read:
> > >
> > > dstanfel:bin ninjawarrior343$ ncdump -c
> > 19800101.ocean_layer.nc <http://19800101.ocean_layer.nc>
> <http://19800101.ocean_layer.nc>
> > > <http://19800101.ocean_layer.nc>
> > >
> > > netcdf \19800101.ocean_layer {
> > >
> > > dimensions:
> > >
> > > grid_xt_ocean = 24 ;
> > >
> > > grid_yt_ocean = 35 ;
> > >
> > > theta = 100 ;
> > >
> > > theta_edges = 101 ;
> > >
> > > Time = UNLIMITED ; // (1 currently)
> > >
> > > nv = 2 ;
> > >
> > > xt_ocean = 24 ;
> > >
> > > yt_ocean = 35 ;
> > >
> > > st_ocean = 18 ;
> > >
> > > st_edges_ocean = 19 ;
> > >
> > > potrho = 100 ;
> > >
> > > potrho_edges = 101 ;
> > >
> > > variables:
> > >
> > > double grid_xt_ocean(grid_xt_ocean) ;
> > >
> > > grid_xt_ocean:long_name = "tcell longitude" ;
> > >
> > > grid_xt_ocean:units = "degrees_E" ;
> > >
> > > grid_xt_ocean:cartesian_axis = "X" ;
> > >
> > > double grid_yt_ocean(grid_yt_ocean) ;
> > >
> > > grid_yt_ocean:long_name = "tcell latitude" ;
> > >
> > > grid_yt_ocean:units = "degrees_N" ;
> > >
> > > grid_yt_ocean:cartesian_axis = "Y" ;
> > >
> > > double theta(theta) ;
> > >
> > > theta:long_name = "potential or conservative
> temperature" ;
> > >
> > > theta:units = "C" ;
> > >
> > > theta:cartesian_axis = "Z" ;
> > >
> > > theta:positive = "up" ;
> > >
> > > theta:edges = "theta_edges" ;
> > >
> > > double theta_edges(theta_edges) ;
> > >
> > > theta_edges:long_name = "potential or conservative
> > temperature
> > > edges" ;
> > >
> > > theta_edges:units = "C" ;
> > >
> > > theta_edges:cartesian_axis = "Z" ;
> > >
> > > theta_edges:positive = "up" ;
> > >
> > > double Time(Time) ;
> > >
> > > Time:long_name = "Time" ;
> > >
> > > Time:units = "days since 1980-01-01 00:00:00" ;
> > >
> > > Time:cartesian_axis = "T" ;
> > >
> > > Time:calendar_type = "NOLEAP" ;
> > >
> > > Time:calendar = "NOLEAP" ;
> > >
> > > Time:bounds = "Time_bounds" ;
> > >
> > > double nv(nv) ;
> > >
> > > nv:long_name = "vertex number" ;
> > >
> > > nv:units = "none" ;
> > >
> > > nv:cartesian_axis = "N" ;
> > >
> > > double xt_ocean(xt_ocean) ;
> > >
> > > xt_ocean:long_name = "tcell longitude" ;
> > >
> > > xt_ocean:units = "degrees_E" ;
> > >
> > > xt_ocean:cartesian_axis = "X" ;
> > >
> > > double yt_ocean(yt_ocean) ;
> > >
> > > yt_ocean:long_name = "tcell latitude" ;
> > >
> > > yt_ocean:units = "degrees_N" ;
> > >
> > > yt_ocean:cartesian_axis = "Y" ;
> > >
> > > double st_ocean(st_ocean) ;
> > >
> > > st_ocean:long_name = "tcell pstar" ;
> > >
> > > st_ocean:units = "dbars" ;
> > >
> > > st_ocean:cartesian_axis = "Z" ;
> > >
> > > st_ocean:positive = "down" ;
> > >
> > > st_ocean:edges = "st_edges_ocean" ;
> > >
> > > double st_edges_ocean(st_edges_ocean) ;
> > >
> > > st_edges_ocean:long_name = "tcell pstar edges" ;
> > >
> > > st_edges_ocean:units = "dbars" ;
> > >
> > > st_edges_ocean:cartesian_axis = "Z" ;
> > >
> > > st_edges_ocean:positive = "down" ;
> > >
> > > double potrho(potrho) ;
> > >
> > > potrho:long_name = "potential density" ;
> > >
> > > potrho:units = "kg/m^3" ;
> > >
> > > potrho:cartesian_axis = "Z" ;
> > >
> > > potrho:positive = "down" ;
> > >
> > > potrho:edges = "potrho_edges" ;
> > >
> > > double potrho_edges(potrho_edges) ;
> > >
> > > potrho_edges:long_name = "potential density edges" ;
> > >
> > > potrho_edges:units = "kg/m^3" ;
> > >
> > > potrho_edges:cartesian_axis = "Z" ;
> > >
> > > potrho_edges:positive = "down" ;
> > >
> > > float depth_of_theta(Time, theta, grid_yt_ocean,
> > grid_xt_ocean) ;
> > >
> > > depth_of_theta:long_name = "depth of potential temp
> > surface" ;
> > >
> > > depth_of_theta:units = "m" ;
> > >
> > > depth_of_theta:valid_range = 0.f, 1.e+10f ;
> > >
> > > depth_of_theta:missing_value = -1.e+20f ;
> > >
> > > depth_of_theta:_FillValue = -1.e+20f ;
> > >
> > > depth_of_theta:cell_methods = "time: mean" ;
> > >
> > > depth_of_theta:time_avg_info =
> > "average_T1,average_T2,average_DT" ;
> > >
> > > float rho(Time, st_ocean, yt_ocean, xt_ocean) ;
> > >
> > > rho:long_name = "in situ density" ;
> > >
> > > rho:units = "kg/m^3" ;
> > >
> > > rho:valid_range = -10.f, 100000.f ;
> > >
> > > rho:missing_value = -1.e+20f ;
> > >
> > > rho:_FillValue = -1.e+20f ;
> > >
> > > rho:cell_methods = "time: mean" ;
> > >
> > > rho:time_avg_info =
> "average_T1,average_T2,average_DT" ;
> > >
> > > rho:coordinates = "geolon_t geolat_t" ;
> > >
> > > float neutral_rho(Time, st_ocean, yt_ocean,
> xt_ocean) ;
> > >
> > > neutral_rho:long_name = "potential density estimate of
> > neutral
> > > density" ;
> > >
> > > neutral_rho:units = "kg/m^3" ;
> > >
> > > neutral_rho:valid_range = -10.f, 100000.f ;
> > >
> > > neutral_rho:missing_value = -1.e+20f ;
> > >
> > > neutral_rho:_FillValue = -1.e+20f ;
> > >
> > > neutral_rho:cell_methods = "time: mean" ;
> > >
> > > neutral_rho:time_avg_info =
> > "average_T1,average_T2,average_DT" ;
> > >
> > > neutral_rho:coordinates = "geolon_t geolat_t" ;
> > >
> > > float pot_rho_0(Time, st_ocean, yt_ocean, xt_ocean) ;
> > >
> > > pot_rho_0:long_name = "potential density
> referenced to 0
> > dbar" ;
> > >
> > > pot_rho_0:units = "kg/m^3" ;
> > >
> > > pot_rho_0:valid_range = -10.f, 100000.f ;
> > >
> > > pot_rho_0:missing_value = -1.e+20f ;
> > >
> > > pot_rho_0:_FillValue = -1.e+20f ;
> > >
> > > pot_rho_0:cell_methods = "time: mean" ;
> > >
> > > pot_rho_0:time_avg_info =
> > "average_T1,average_T2,average_DT" ;
> > >
> > > pot_rho_0:coordinates = "geolon_t geolat_t" ;
> > >
> > > pot_rho_0:standard_name =
> "sea_water_potential_density" ;
> > >
> > > float salt_on_rho(Time, potrho, grid_yt_ocean,
> > grid_xt_ocean) ;
> > >
> > > salt_on_rho:long_name = "salt on potential density
> surface" ;
> > >
> > > salt_on_rho:units = "psu" ;
> > >
> > > salt_on_rho:valid_range = 0.f, 1000.f ;
> > >
> > > salt_on_rho:missing_value = -1.e+20f ;
> > >
> > > salt_on_rho:_FillValue = -1.e+20f ;
> > >
> > > salt_on_rho:cell_methods = "time: mean" ;
> > >
> > > salt_on_rho:time_avg_info =
> > "average_T1,average_T2,average_DT" ;
> > >
> > > float potrho_mix_depth(Time, yt_ocean, xt_ocean) ;
> > >
> > > potrho_mix_depth:long_name = "Depth of potential
> density
> > mixed
> > > layer" ;
> > >
> > > potrho_mix_depth:units = "m" ;
> > >
> > > potrho_mix_depth:valid_range = -1000000.f, 1000000.f ;
> > >
> > > potrho_mix_depth:missing_value = -1.e+20f ;
> > >
> > > potrho_mix_depth:_FillValue = -1.e+20f ;
> > >
> > > potrho_mix_depth:cell_methods = "time: mean" ;
> > >
> > > potrho_mix_depth:time_avg_info =
> > > "average_T1,average_T2,average_DT" ;
> > >
> > > potrho_mix_depth:coordinates = "geolon_t geolat_t" ;
> > >
> > > float potrho_mix_base(Time, yt_ocean, xt_ocean) ;
> > >
> > > potrho_mix_base:long_name = "Potential density at
> mixed layer
> > > base" ;
> > >
> > > potrho_mix_base:units = "kg/m^3" ;
> > >
> > > potrho_mix_base:valid_range = -1000000.f, 1000000.f ;
> > >
> > > potrho_mix_base:missing_value = -1.e+20f ;
> > >
> > > potrho_mix_base:_FillValue = -1.e+20f ;
> > >
> > > potrho_mix_base:cell_methods = "time: mean" ;
> > >
> > > potrho_mix_base:time_avg_info =
> > "average_T1,average_T2,average_DT" ;
> > >
> > > potrho_mix_base:coordinates = "geolon_t geolat_t" ;
> > >
> > > float press(Time, st_ocean, yt_ocean, xt_ocean) ;
> > >
> > > press:long_name = "absolute pressure" ;
> > >
> > > press:units = "dbar" ;
> > >
> > > press:valid_range = -10.f, 1000000.f ;
> > >
> > > press:missing_value = -1.e+20f ;
> > >
> > > press:_FillValue = -1.e+20f ;
> > >
> > > press:cell_methods = "time: mean" ;
> > >
> > > press:time_avg_info =
> "average_T1,average_T2,average_DT" ;
> > >
> > > press:coordinates = "geolon_t geolat_t" ;
> > >
> > > float mld(Time, yt_ocean, xt_ocean) ;
> > >
> > > mld:long_name = "mixed layer depth determined by
> density
> > criteria" ;
> > >
> > > mld:units = "m" ;
> > >
> > > mld:valid_range = 0.f, 1000000.f ;
> > >
> > > mld:missing_value = -1.e+20f ;
> > >
> > > mld:_FillValue = -1.e+20f ;
> > >
> > > mld:cell_methods = "time: mean" ;
> > >
> > > mld:time_avg_info =
> "average_T1,average_T2,average_DT" ;
> > >
> > > mld:coordinates = "geolon_t geolat_t" ;
> > >
> > > mld:standard_name =
> > > "ocean_mixed_layer_thickness_defined_by_sigma_t" ;
> > >
> > > double average_T1(Time) ;
> > >
> > > average_T1:long_name = "Start time for average
> period" ;
> > >
> > > average_T1:units = "days since 1980-01-01 00:00:00" ;
> > >
> > > average_T1:missing_value = 1.e+20 ;
> > >
> > > average_T1:_FillValue = 1.e+20 ;
> > >
> > > double average_T2(Time) ;
> > >
> > > average_T2:long_name = "End time for average period" ;
> > >
> > > average_T2:units = "days since 1980-01-01 00:00:00" ;
> > >
> > > average_T2:missing_value = 1.e+20 ;
> > >
> > > average_T2:_FillValue = 1.e+20 ;
> > >
> > > double average_DT(Time) ;
> > >
> > > average_DT:long_name = "Length of average period" ;
> > >
> > > average_DT:units = "days" ;
> > >
> > > average_DT:missing_value = 1.e+20 ;
> > >
> > > average_DT:_FillValue = 1.e+20 ;
> > >
> > > double Time_bounds(Time, nv) ;
> > >
> > > Time_bounds:long_name = "Time axis boundaries" ;
> > >
> > > Time_bounds:units = "days" ;
> > >
> > > Time_bounds:missing_value = 1.e+20 ;
> > >
> > > Time_bounds:_FillValue = 1.e+20 ;
> > >
> > >
> > > // global attributes:
> > >
> > > :filename = "ocean_layer.nc
> <http://ocean_layer.nc> <http://ocean_layer.nc>
> > <http://ocean_layer.nc>" ;
> > >
> > > :title = "MOM4 box" ;
> > >
> > > :grid_type = "regular" ;
> > >
> > > :grid_tile = "N/A" ;
> > >
> > > data:
> > >
> > >
> > > grid_xt_ocean = 1.25, 3.75, 6.25, 8.75, 11.25,
> 13.75,
> > 16.25,
> > > 18.75, 21.25,
> > >
> > > 23.75, 26.25, 28.75, 31.25, 33.75, 36.25,
> 38.75, 41.25,
> > > 43.75, 46.25,
> > >
> > > 48.75, 51.25, 53.75, 56.25, 58.75 ;
> > >
> > >
> > > grid_yt_ocean = 1.25, 3.7488100528717,
> 6.2393012046814,
> > > 8.71919345855713,
> > >
> > > 11.1815176010132, 13.6242818832397,
> 16.0408229827881,
> > > 18.4296073913574,
> > >
> > > 20.784387588501, 23.1042194366455,
> 25.3833503723145,
> > > 27.6215190887451,
> > >
> > > 29.813497543335, 31.9597606658936,
> 34.0555992126465,
> > > 36.1022338867188,
> > >
> > > 38.0954322814941, 40.0371551513672,
> 41.9235687255859,
> > > 43.7573394775391,
> > >
> > > 45.5349464416504, 47.259708404541,
> 48.9283294677734,
> > > 50.5447235107422,
> > >
> > > 52.1057090759277, 53.6157531738281,
> 55.0716934204102,
> > > 56.4785079956055,
> > >
> > > 57.8329429626465, 59.1404571533203,
> 60.3976211547852,
> > > 61.6103477478027,
> > >
> > > 62.7749481201172, 63.8977813720703,
> 64.9748153686523 ;
> > >
> > >
> > > theta = -1.84, -1.52, -1.2, -0.88, -0.56, -0.24,
> > > 0.0800000000000003, 0.4,
> > >
> > > 0.72, 1.04, 1.36, 1.68, 2, 2.32, 2.64, 2.96,
> 3.28, 3.6,
> > > 3.92, 4.24, 4.56,
> > >
> > > 4.88, 5.2, 5.52, 5.84, 6.16, 6.48, 6.8, 7.12,
> 7.44,
> > 7.76,
> > > 8.08, 8.4,
> > >
> > > 8.72, 9.04, 9.36, 9.68000000000001, 10,
> 10.32, 10.64,
> > > 10.96, 11.28, 11.6,
> > >
> > > 11.92, 12.24, 12.56, 12.88, 13.2, 13.52,
> 13.84, 14.16,
> > > 14.48, 14.8,
> > >
> > > 15.12, 15.44, 15.76, 16.08, 16.4, 16.72,
> 17.04, 17.36,
> > > 17.68, 18, 18.32,
> > >
> > > 18.64, 18.96, 19.28, 19.6, 19.92, 20.24,
> 20.56, 20.88,
> > > 21.2, 21.52,
> > >
> > > 21.84, 22.16, 22.48, 22.8, 23.12, 23.44,
> 23.76, 24.08,
> > > 24.4, 24.72,
> > >
> > > 25.04, 25.36, 25.68, 26, 26.32, 26.64, 26.96,
> 27.28,
> > 27.6,
> > > 27.92, 28.24,
> > >
> > > 28.56, 28.88, 29.2, 29.52, 29.84 ;
> > >
> > >
> > > theta_edges = 1028, 1028.1, 1028.2, 1028.3,
> 1028.4, 1028.5,
> > > 1028.6, 1028.7,
> > >
> > > 1028.8, 1028.9, 1029, 1029.1, 1029.2, 1029.3,
> 1029.4,
> > > 1029.5, 1029.6,
> > >
> > > 1029.7, 1029.8, 1029.9, 1030, 1030.1, 1030.2,
> 1030.3,
> > > 1030.4, 1030.5,
> > >
> > > 1030.6, 1030.7, 1030.8, 1030.9, 1031, 1031.1,
> 1031.2,
> > > 1031.3, 1031.4,
> > >
> > > 1031.5, 1031.6, 1031.7, 1031.8, 1031.9, 1032,
> 1032.1,
> > > 1032.2, 1032.3,
> > >
> > > 1032.4, 1032.5, 1032.6, 1032.7, 1032.8,
> 1032.9, 1033,
> > > 1033.1, 1033.2,
> > >
> > > 1033.3, 1033.4, 1033.49999999999,
> 1033.59999999999,
> > > 1033.69999999999,
> > >
> > > 1033.79999999999, 1033.89999999999,
> 1033.99999999999,
> > > 1034.09999999999,
> > >
> > > 1034.19999999999, 1034.29999999999,
> 1034.39999999999,
> > > 1034.49999999999,
> > >
> > > 1034.59999999999, 1034.69999999999,
> 1034.79999999999,
> > > 1034.89999999999,
> > >
> > > 1034.99999999999, 1035.09999999999,
> 1035.19999999999,
> > > 1035.29999999999,
> > >
> > > 1035.39999999999, 1035.49999999999,
> 1035.59999999999,
> > > 1035.69999999999,
> > >
> > > 1035.79999999999, 1035.89999999999,
> 1035.99999999999,
> > > 1036.09999999999,
> > >
> > > 1036.19999999999, 1036.29999999999,
> 1036.39999999999,
> > > 1036.49999999999,
> > >
> > > 1036.59999999999, 1036.69999999999,
> 1036.79999999999,
> > > 1036.89999999999,
> > >
> > > 1036.99999999999, 1037.09999999999,
> 1037.19999999999,
> > > 1037.29999999999,
> > >
> > > 1037.39999999999, 1037.49999999999,
> 1037.59999999999,
> > > 1037.69999999999,
> > >
> > > 1037.79999999999, 1037.89999999999,
> 1037.99999999999 ;
> > >
> > >
> > > Time = 2 ;
> > >
> > >
> > > nv = 1, 2 ;
> > >
> > >
> > > xt_ocean = 1.25, 3.75, 6.25, 8.75, 11.25, 13.75,
> 16.25,
> > 18.75,
> > > 21.25, 23.75,
> > >
> > > 26.25, 28.75, 31.25, 33.75, 36.25, 38.75,
> 41.25, 43.75,
> > > 46.25, 48.75,
> > >
> > > 51.25, 53.75, 56.25, 58.75 ;
> > >
> > >
> > > yt_ocean = 1.25, 3.7488100528717, 6.2393012046814,
> > > 8.71919345855713,
> > >
> > > 11.1815176010132, 13.6242818832397,
> 16.0408229827881,
> > > 18.4296073913574,
> > >
> > > 20.784387588501, 23.1042194366455,
> 25.3833503723145,
> > > 27.6215190887451,
> > >
> > > 29.813497543335, 31.9597606658936,
> 34.0555992126465,
> > > 36.1022338867188,
> > >
> > > 38.0954322814941, 40.0371551513672,
> 41.9235687255859,
> > > 43.7573394775391,
> > >
> > > 45.5349464416504, 47.259708404541,
> 48.9283294677734,
> > > 50.5447235107422,
> > >
> > > 52.1057090759277, 53.6157531738281,
> 55.0716934204102,
> > > 56.4785079956055,
> > >
> > > 57.8329429626465, 59.1404571533203,
> 60.3976211547852,
> > > 61.6103477478027,
> > >
> > > 62.7749481201172, 63.8977813720703,
> 64.9748153686523 ;
> > >
> > >
> > > st_ocean = 17.75025, 53.25075, 88.75125, 124.25175,
> > 159.75225,
> > > 195.25275,
> > >
> > > 230.75325, 266.25375, 314.34159289856,
> 399.171716592407,
> > >
> > > 541.922400494385, 759.079548358154,
> 1061.10117883301,
> > > 1451.56990550537,
> > >
> > > 1926.90292906494, 2476.64250944824,
> 3084.30280480957,
> > > 3728.70522619629 ;
> > >
> > >
> > > st_edges_ocean = 0, 35.5005, 71.001, 106.5015,
> 142.002,
> > > 177.5025, 213.003,
> > >
> > > 248.5035, 290.29765597229, 356.756654745483,
> > 470.547043066406,
> > >
> > > 650.50097442627, 910.090332641602,
> 1256.33548026123,
> > > 1689.23641728516,
> > >
> > > 2201.77290498047, 2780.47265712891,
> 3406.50401550293,
> > > 4057.20024763184 ;
> > >
> > >
> > > potrho = 1028.05, 1028.15, 1028.25, 1028.35,
> 1028.45,
> > 1028.55,
> > > 1028.65,
> > >
> > > 1028.75, 1028.85, 1028.95, 1029.05, 1029.15,
> 1029.25,
> > > 1029.35, 1029.45,
> > >
> > > 1029.55, 1029.65, 1029.75, 1029.85, 1029.95,
> 1030.05,
> > > 1030.15, 1030.25,
> > >
> > > 1030.35, 1030.45, 1030.55, 1030.65, 1030.75,
> 1030.85,
> > > 1030.95, 1031.05,
> > >
> > > 1031.15, 1031.25, 1031.35, 1031.45, 1031.55,
> 1031.65,
> > > 1031.75, 1031.85,
> > >
> > > 1031.95, 1032.05, 1032.15, 1032.25, 1032.35,
> 1032.45,
> > > 1032.55, 1032.65,
> > >
> > > 1032.75, 1032.85, 1032.95, 1033.05, 1033.15,
> 1033.25,
> > > 1033.35, 1033.45,
> > >
> > > 1033.54999999999, 1033.64999999999,
> 1033.74999999999,
> > > 1033.84999999999,
> > >
> > > 1033.94999999999, 1034.04999999999,
> 1034.14999999999,
> > > 1034.24999999999,
> > >
> > > 1034.34999999999, 1034.44999999999,
> 1034.54999999999,
> > > 1034.64999999999,
> > >
> > > 1034.74999999999, 1034.84999999999,
> 1034.94999999999,
> > > 1035.04999999999,
> > >
> > > 1035.14999999999, 1035.24999999999,
> 1035.34999999999,
> > > 1035.44999999999,
> > >
> > > 1035.54999999999, 1035.64999999999,
> 1035.74999999999,
> > > 1035.84999999999,
> > >
> > > 1035.94999999999, 1036.04999999999,
> 1036.14999999999,
> > > 1036.24999999999,
> > >
> > > 1036.34999999999, 1036.44999999999,
> 1036.54999999999,
> > > 1036.64999999999,
> > >
> > > 1036.74999999999, 1036.84999999999,
> 1036.94999999999,
> > > 1037.04999999999,
> > >
> > > 1037.14999999999, 1037.24999999999,
> 1037.34999999999,
> > > 1037.44999999999,
> > >
> > > 1037.54999999999, 1037.64999999999,
> 1037.74999999999,
> > > 1037.84999999999,
> > >
> > > 1037.94999999999 ;
> > >
> > >
> > > potrho_edges = 1028, 1028.1, 1028.2, 1028.3, 1028.4,
> > 1028.5,
> > > 1028.6, 1028.7,
> > >
> > > 1028.8, 1028.9, 1029, 1029.1, 1029.2, 1029.3,
> 1029.4,
> > > 1029.5, 1029.6,
> > >
> > > 1029.7, 1029.8, 1029.9, 1030, 1030.1, 1030.2,
> 1030.3,
> > > 1030.4, 1030.5,
> > >
> > > 1030.6, 1030.7, 1030.8, 1030.9, 1031, 1031.1,
> 1031.2,
> > > 1031.3, 1031.4,
> > >
> > > 1031.5, 1031.6, 1031.7, 1031.8, 1031.9, 1032,
> 1032.1,
> > > 1032.2, 1032.3,
> > >
> > > 1032.4, 1032.5, 1032.6, 1032.7, 1032.8,
> 1032.9, 1033,
> > > 1033.1, 1033.2,
> > >
> > > 1033.3, 1033.4, 1033.49999999999,
> 1033.59999999999,
> > > 1033.69999999999,
> > >
> > > 1033.79999999999, 1033.89999999999,
> 1033.99999999999,
> > > 1034.09999999999,
> > >
> > > 1034.19999999999, 1034.29999999999,
> 1034.39999999999,
> > > 1034.49999999999,
> > >
> > > 1034.59999999999, 1034.69999999999,
> 1034.79999999999,
> > > 1034.89999999999,
> > >
> > > 1034.99999999999, 1035.09999999999,
> 1035.19999999999,
> > > 1035.29999999999,
> > >
> > > 1035.39999999999, 1035.49999999999,
> 1035.59999999999,
> > > 1035.69999999999,
> > >
> > > 1035.79999999999, 1035.89999999999,
> 1035.99999999999,
> > > 1036.09999999999,
> > >
> > > 1036.19999999999, 1036.29999999999,
> 1036.39999999999,
> > > 1036.49999999999,
> > >
> > > 1036.59999999999, 1036.69999999999,
> 1036.79999999999,
> > > 1036.89999999999,
> > >
> > > 1036.99999999999, 1037.09999999999,
> 1037.19999999999,
> > > 1037.29999999999,
> > >
> > > 1037.39999999999, 1037.49999999999,
> 1037.59999999999,
> > > 1037.69999999999,
> > >
> > > 1037.79999999999, 1037.89999999999,
> 1037.99999999999 ;
> > >
> > > }
> > >
> > >
> > > I am having trouble deciding which will be the xdef,
> > ydef, zdef,
> > > and tdef values. Also, how do I find what UNDEF
> number to
> > use.
> > > Your help will be greatly appreciated.
> > >
> > > Thanks,
> > >
> > > David
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > gradsusr mailing list
> > > gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
> <mailto:gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>>
> > > http://gradsusr.org/mailman/listinfo/gradsusr
> > >
> >
> > --
> >
> > Please note that Charles.Seman at noaa.gov
> <mailto:Charles.Seman at noaa.gov>
> > <mailto:Charles.Seman at noaa.gov
> <mailto:Charles.Seman at noaa.gov>> should be considered my NOAA
> > email address, not cjs at gfdl.noaa.gov
> <mailto:cjs at gfdl.noaa.gov> <mailto:cjs at gfdl.noaa.gov
> <mailto:cjs at gfdl.noaa.gov>>.
> >
> >
> ********************************************************************
> > Charles Seman Charles.Seman at noaa.gov
> <mailto:Charles.Seman at noaa.gov> <mailto:Charles.Seman at noaa.gov
> <mailto:Charles.Seman at noaa.gov>>
> > U.S. Department of Commerce / NOAA / OAR
> > Geophysical Fluid Dynamics Laboratory voice: (609)
> 452-6547
> > 201 Forrestal Road fax: (609)
> 987-5063
> > Princeton, NJ 08540-6649 http://www.gfdl.noaa.gov/~cjs/
> >
> ********************************************************************
> >
> > "The contents of this message are mine personally and do not
> reflect any
> > official or unofficial position of the United States Federal
> Government,
> > the United States Department of Commerce, or NOAA."
> > _______________________________________________
> > gradsusr mailing list
> > gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
> <mailto:gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>>
> > http://gradsusr.org/mailman/listinfo/gradsusr
> >
> >
> >
> >
> > _______________________________________________
> > gradsusr mailing list
> > gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
> > http://gradsusr.org/mailman/listinfo/gradsusr
> >
>
> --
>
> Please note that Charles.Seman at noaa.gov
> <mailto:Charles.Seman at noaa.gov> should be considered my NOAA
> email address, not cjs at gfdl.noaa.gov <mailto:cjs at gfdl.noaa.gov>.
>
> ********************************************************************
> Charles Seman Charles.Seman at noaa.gov <mailto:Charles.Seman at noaa.gov>
> U.S. Department of Commerce / NOAA / OAR
> Geophysical Fluid Dynamics Laboratory voice: (609) 452-6547
> 201 Forrestal Road fax: (609) 987-5063
> Princeton, NJ 08540-6649 http://www.gfdl.noaa.gov/~cjs/
> ********************************************************************
>
> "The contents of this message are mine personally and do not reflect any
> official or unofficial position of the United States Federal Government,
> the United States Department of Commerce, or NOAA."
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
--
Please note that Charles.Seman at noaa.gov should be considered my NOAA
email address, not cjs at gfdl.noaa.gov.
********************************************************************
Charles Seman Charles.Seman at noaa.gov
U.S. Department of Commerce / NOAA / OAR
Geophysical Fluid Dynamics Laboratory voice: (609) 452-6547
201 Forrestal Road fax: (609) 987-5063
Princeton, NJ 08540-6649 http://www.gfdl.noaa.gov/~cjs/
********************************************************************
"The contents of this message are mine personally and do not reflect any
official or unofficial position of the United States Federal Government,
the United States Department of Commerce, or NOAA."
More information about the gradsusr
mailing list