[gradsusr] Do the GrADS Examples work?
brown wrap
gramos at yahoo.com
Tue Oct 8 13:55:05 EDT 2013
This is what I am following:
http://www.iges.org/grads/gadoc/tutorial.html
________________________________
From: James T. Potemra <jimp at hawaii.edu>
To: brown wrap <gramos at yahoo.com>; GrADS Users Forum <gradsusr at gradsusr.org>
Sent: Tuesday, October 8, 2013 9:19 AM
Subject: Re: [gradsusr] Do the GrADS Examples work?
I'm not sure what the problem is; your variable list is thus:
Number of Variables = 8
> ps 0 1 Surface pressure [hPa]
> ua 7 33 Eastward wind [m/s]
> va 7 34 Northward wind [m/s]
> zg 7 7 Geopotential height [m]
> ta 7 11 Air Temperature [K]
> hus 7 51 Specific humidity [kg/kg]
> ts 0 11 Surface (2m) air temperature [K]
> pr 0 59 Total precipitation rate [kg/(m^2*s)]
and you are trying to display a variable called "dz"? In your earlier
example you tried to display z? In both cases GrADS is telling you
these are not variables... and they are not. You should, however,
be
able to display any in the above list (and dimensions if you want).
Are you trying to run a script or define a variable?
Jim
On 10/8/13 5:23 AM, brown wrap wrote:
No, that didn't work either.
>
>
>
>
>
>
>
> Welcome to the OpenGrADS Bundle Distribution
> --------------------------------------------
>
>For additional information enter "grads -h".
>
>Starting
"/opt/opengrads/Contents/Linux/Versions/2.0.1.oga.1/x86_64/grads
" ...
>
>
>Grid Analysis and Display System (GrADS) Version 2.0.1.oga.1
>Copyright (c) 1988-2011 by Brian Doty and the
>Institute for Global Environment and Society (IGES)
>GrADS comes with ABSOLUTELY NO WARRANTY
>See file COPYRIGHT for more information
>
>Config: v2.0.1.oga.1 little-endian readline printim grib2
netcdf hdf4-sds hdf5 opendap-grids,stn athena geotiff
shapefile
>Issue 'q config' command for more detailed configuration
information
>Loading User Defined Extensions table
</opt/opengrads/Contents/Linux/Versions/2.0.1.oga.1/x86_64/gex/udxt>
... ok.
>Landscape mode? ('n' for portrait): n
>GX Package Initialization: Size = 8.5 11
>ga-> open model.ctl
>Scanning description file: model.ctl
>Data file model.grb is open as file 1
>LON set to 0 360
>LAT set to -90 90
>LEV set to 1000 1000
>Time values set: 1987:1:1:0 1987:1:1:0
>E set to 1 1
>ga-> query file
>File 1 : "Sample Model Data for lats4d Tutorial"
> Descriptor: model.ctl
> Binary: model.grb
> Type = Gridded
> Xsize = 72 Ysize = 46 Zsize = 7 Tsize = 5 Esize = 1
> Number of Variables = 8
> ps 0 1 Surface pressure [hPa]
> ua 7 33 Eastward wind [m/s]
> va 7 34 Northward wind [m/s]
> zg 7 7 Geopotential height [m]
> ta 7 11 Air Temperature [K]
> hus 7 51 Specific humidity [kg/kg]
> ts 0 11 Surface (2m) air temperature [K]
> pr 0 59 Total precipitation rate [kg/(m^2*s)]
>ga-> d ps
>Contouring: 500 to 1000 interval 50
>ga-> clear
>ga-> set lon -90
>LON set to -90 -90
>ga-> set lat 40
>LAT set to 42 42
>ga-> set lev 500
>LEV set to 500 500
>ga-> set t 1
>Time values set: 1987:1:1:0 1987:1:1:0
>ga-> d dz
>Syntax Error: Invalid Operand
> 'dz' not a variable or function name
> Error ocurred at column 1
>DISPLAY error: Invalid expression
> Expression = dz
>ga->
>
>
>
>
>
>
>
>
>________________________________
> From: Eric Altshuler <ela at cola.iges.org>
>To: brown wrap <gramos at yahoo.com>; GrADS Users Forum <gradsusr at gradsusr.org>
>Sent: Monday, October 7, 2013 4:25 PM
>Subject: Re: [gradsusr] Do the GrADS Examples work?
>
>
>
>
>There is no variable 'z' in the ctl file, but there is 'zg'. 'd zg' should display geopotential height.
>
>>________________________________
>From: "brown wrap" <gramos at yahoo.com>
>To: "Muhammad Yunus Ahmad Mazuki" <ukm.yunus at gmail.com>, "GrADS Users Forum" <gradsusr at gradsusr.org>
>Sent: Monday, October 7, 2013 1:59:17 PM
>Subject: Re: [gradsusr] Do the GrADS Examples work?
>
>
>Here is the output of what I tried. Right off it seems to fail:
>
>
>Grid Analysis and Display System (GrADS) Version 2.0.a9
>Copyright (c) 1988-2010 by Brian Doty and the
>Institute for Global Environment and Society
(IGES)
>GrADS comes with ABSOLUTELY NO WARRANTY
>See file COPYRIGHT for more information
>
>Config: v2.0.a9 little-endian readline printim
grib2 netcdf hdf4-sds hdf5 opendap-grids
geotiff shapefile
>Issue 'q config' command for more detailed
configuration information
>Landscape mode? ('n' for portrait): n
>GX Package Initialization: Size = 8.5 11
>ga-> open model.ctl
>Scanning description file: model.ctl
>Data file model.grb is open as file 1
>LON set to 0 360
>LAT set to -90 90
>LEV set to 1000 1000
>Time values set: 1987:1:1:0 1987:1:1:0
>E set to 1 1
>ga-> query file
>File 1 : "Sample Model Data for lats4d
Tutorial"
> Descriptor: model.ctl
> Binary: model.grb
> Type = Gridded
> Xsize = 72 Ysize = 46 Zsize = 7 Tsize =
5 Esize = 1
> Number of Variables = 8
> ps 0 1 Surface pressure [hPa]
> ua 7 33 Eastward wind [m/s]
> va 7 34 Northward wind [m/s]
> zg 7 7 Geopotential height [m]
> ta 7 11 Air Temperature [K]
> hus 7 51 Specific humidity [kg/kg]
> ts 0 11 Surface (2m) air temperature
[K]
> pr 0 59 Total precipitation rate
[kg/(m^2*s)]
>ga-> d ps
>Contouring: 500 to 1000 interval 50
>ga-> d ps
>Contouring: 500 to 1000 interval 50
>ga-> clear
>ga-> set lon -90
>LON set to -90 -90
>ga-> set lat 40
>LAT set to 42 42
>ga-> set lev 500
>LEV set to 500 500
>ga-> set t 1
>Time values set: 1987:1:1:0 1987:1:1:0
>ga-> d z
>Syntax Error: Invalid Operand
> 'z' not a variable or function name
> Error ocurred at column 1
>DISPLAY error: Invalid expression
> Expression = z
>ga->
>
>
>
>
>brownwrap.blogspot.com
>
>
>brownwraps-linuxfromscratch.blogspot.com/
>
>
>
>
>
>
>
>________________________________
> From: Muhammad Yunus Ahmad Mazuki <ukm.yunus at gmail.com>
>To: brown wrap <gramos at yahoo.com>; GrADS Users Forum <gradsusr at gradsusr.org>
>Sent: Saturday, October 5, 2013 6:51 PM
>Subject: Re: [gradsusr] Do the GrADS Examples work?
>
>
>
>If you mean the tutorial, yes it does work. If you mean other example online, those example might be openGrADS example, which is based on GrADS itself. Therefore it the tutorial is not working, and you are absolutely sure you can't open the tutorial file itself, and not mistaking the path or anything, I would say you have a faulty installation.
>
>
>
>
>On Sun, Oct 6, 2013 at 9:41 AM, brown wrap <gramos at yahoo.com> wrote:
>
>
>>
>>I have installed GrADS for a user, and have been going through the examples. Not all of them work. I am trying to determine if I have a faulty installation, or if some of the examples are broken. Thanks.
>>_______________________________________________
>>gradsusr mailing list
>>gradsusr at gradsusr.org
>>http://gradsusr.org/mailman/listinfo/gradsusr
>>
>>
>
>
>
>_______________________________________________
>gradsusr mailing list
>gradsusr at gradsusr.org
>http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
>
>
>_______________________________________________
gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20131008/3a4ddcc3/attachment-0001.html
More information about the gradsusr
mailing list