[gradsusr] GRIB2 All Undefined Values

[Charles]

Thank you for the reply, Wesley. It sounds like there might be an issue
with my gribmap or GrADS install. If I run gribmap with the verbose option
on GRIB1 files, it matches all the variables just fine. However, it returns
an error with GRIB2 files.

gribmap -v -i gfs.t12z.mastergrb2f12.ctl
      gribmap: scanning GRIB2 file: gfs.t12z.mastergrb2f12
      Segmentation fault (core dumped)

When I don't run verbose option on GRIB2 files, gribmap will create an
index file. But based on the above error, those index files are probably
not correct. Which would explain my original issue of all values being
undefined.

Do you have any suggestions on where I should go from here to solve this
gribmap issue?

Thanks again,

Charles


On Tue, Nov 19, 2013 at 7:36 AM, Wesley Ebisuzaki - NOAA Federal <
wesley.ebisuzaki at noaa.gov> wrote:

> Charles,
>
>    It worked for me.
>
>       g2ctl gfs.t12z.mastergrb2f12 >junk.ctl
>                  (I see that you did this)
>       gribmap -i junk.ctl
>                  (do not use -0)
>
>      grads
>       Landscape mode? ('n' for portrait): (entered return)
>       ga-> open junk.ctl
>       ga-> d hgt200mb
>
> Hint:  use gribmap -v -i junk.ctl to see which fields match the ctl file.
>
>      Wesley
>
>
>
> On Mon, Nov 18, 2013 at 4:33 PM, Charles <cl012685 at gmail.com> wrote:
>
>> Hello All,
>>
>> I am a fairly new user of GrADS. My setup includes: GrADS 2.0.2 on Fedora
>> 19, g2ctl 0.0.8.8 and wgrib2 v1.9.9.
>>
>> I am having issues with all GRIB2 files. I have followed instructions and
>> I can successfully create control files and index files, but GrADS returns
>> "all undefined values" no matter what I try to plot. I have been getting
>> around this by converting the files to GRIB1 and using grib2ctl, which I
>> have had no trouble with. However, I would like to eliminate that step. I
>> was wondering if anyone could shed some light on what I am missing?
>>
>> In case it is an issue with the control file, I have pasted one below
>> from today's 12Z GFS 0.5x0.5 degree from NOMADS.
>>
>> dset ^gfs.t12z.mastergrb2f12
>> index ^gfs.t12z.mastergrb2f12.idx
>> undef 9.999E+20
>> title gfs.t12z.mastergrb2f12
>> * produced by g2ctl v0.0.8.8
>> * command line options: gfs.t12z.mastergrb2f12
>> * griddef=1:0:(720 x 361):grid_template=0:winds(N/S): lat-lon grid:(720 x
>> 361) units 1e-06 input WE:NS output WE:SN res 48 lat 90.000000 to
>> -90.000000 by 0.500000 lon 0.000000 to 359.500000 by 0.500000
>> #points=259920:winds(N/S)
>>
>> dtype grib2
>> ydef 361 linear -90.000000 0.5
>> xdef 720 linear 0.000000 0.500000
>> tdef 1 linear 00Z19nov2013 1mo
>> * PROFILE hPa
>> zdef 2 levels 50000 20000
>> options pascals
>> vars 6
>> HGT200mb   0,100,20000   0,3,5 ** 200 mb Geopotential Height [gpm]
>> HGT500mb   0,100,50000   0,3,5 ** 500 mb Geopotential Height [gpm]
>> UGRD200mb   0,100,20000   0,2,2 ** 200 mb U-Component of Wind [m/s]
>> UGRD500mb   0,100,50000   0,2,2 ** 500 mb U-Component of Wind [m/s]
>> VGRD200mb   0,100,20000   0,2,3 ** 200 mb V-Component of Wind [m/s]
>> VGRD500mb   0,100,50000   0,2,3 ** 500 mb V-Component of Wind [m/s]
>> ENDVARS
>>
>> I have been researching this issue for quite some time and haven't found
>> a solution yet, so any help is greatly appreciated!
>>
>> Charles
>> University of Oklahoma
>>
>> _______________________________________________
>> gradsusr mailing list
>> gradsusr at gradsusr.org
>> http://gradsusr.org/mailman/listinfo/gradsusr
>>
>>
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20131119/f8684102/attachment-0001.html