[gradsusr] Problems clopts

[Marcos Tesouro Montecelo]

Thank you very much for your help,

I've just solved the problems with my script and I can draw the contour 
correctly with my conditions.
Regards, Marcos


Firma MeteoGalicia
MeteoGalicia
      Dr. Marcos Tesouro Montecelo
      Dpto. Predición Numérica e Investigación
	Rúa Roma, 6
15.707 Santiago de Compostela
	Tel: +34 981 957 462
Fax: +34 981 957 466
marcos.tesouro at meteogalicia.es <mailto:marcos.tesouro at meteogalicia.es>
www.meteogalicia.es <http://www.meteogalicia.es/>

El 09/11/12 17:40, Jennifer Adams escribió:
>
>
>
> On Nov 9, 2012, at 9:43 AM, Ricardo Hallak wrote:
>
>> Try this:
>> set ccolor 0
> This one gets reset after every display. Make sure you repeat it 
> before every display command.
>
>> set cthick 5
> This will not affect the display unless you change the 5 to a 6. For 
> the X display and all image output, thickness settings between 1 and 5 
> will always be 1 pixel wide. Settings between 6 and 11 will always be 
> 2 pixels wide, and thickness set to 12 will be 3 pixels wide. This 
> gets reset after a 'clear' but not a 'display'.
>
>> set clopts 0 5 0.11
> Again, change the 5 to a 6 and you'll see the difference. 'set clopts' 
> does not get reset with 'display' or 'clear', only 'reset'.
> --Jennifer
>
>>
>> Ricardo
>>
>> On Fri, 09 Nov 2012 15:09:37 +0100, Marcos Tesouro Montecelo wrote
>>> Hi again,
>>>
>>> I've tested all yours suggestions, but I don't still get to increase
>>> the thickness of the label. It's always the same. I only get to
>>> eliminate the box in the label with the command "set clab masked".
>>> I've also tried to change the size of the string with the command
>>> "set strsiz 0.2", but neither couldn't get it. Any help more? Thank
>>> you very much again
>>>
>>> Firma MeteoGalicia
>>> MeteoGalicia
>>>      Dr. Marcos Tesouro Montecelo
>>>      Dpto. Predición Numérica e Investigación
>>> Rúa Roma, 6
>>> 15.707 Santiago de Compostela
>>> Tel: +34 981 957 462
>>> Fax: +34 981 957 466
>>> marcos.tesouro at meteogalicia.es <mailto:marcos.tesouro at meteogalicia.es>
>>> <mailto:marcos.tesouro at meteogalicia.es> www.meteogalicia.es 
>>> <http://www.meteogalicia.es>
>> <http://www.meteogalicia.es/>
>>>
>>> El 09/11/12 11:19, Davide Sacchetti escribió:
>>>> it *should* work
>>>>
>>>> note that:
>>>> thickness may change from 1 to 6 but you cannot see difference 
>>>> between 1
>>>> and 5 on an X window: you will see the difference only on PostScript
>>>> (eg.: gxeps -i filename). On X there is only difference between (any of
>>>> 1,2,3,4,5) and 6.
>>>>
>>>> about label size the default is 0.10: 0.11 is just 10% more: if you set
>>>> it to 0.2 you should see the change clearly
>>>>
>>>> bye bye
>>>> Davide
>>>>
>>>> On Fri, 2012-11-09 at 10:08 +0100, Marcos Tesouro Montecelo wrote:
>>>>> Hi,
>>>>>
>>>>> I'm trying to modify the size and the thickness of the labels when I
>>>>> plot the contours (set clopts). When I change the paramentres in my
>>>>> script, GRADS seems that don't understand it and it doesn't anything,
>>>>> the label is the same with different values.
>>>>> I have the same problem when I try to change the thickness of the
>>>>> contours (set cthick). On contrary, I can change the colour of the
>>>>> lines (set ccolor).
>>>>>
>>>>> Mi commands in the script are:
>>>>>
>>>>> set ccolor 0
>>>>> set cthick 5
>>>>> set clopts -1 -1 0.11
>>>>>
>>>>> I'm using the version 2.0.1 of the GRADS
>>>>>
>>>>> Could you help me, please?
>>>>> Thanks in advance
>>>>> -- 
>>>>> MeteoGalicia
>>>>>      Dr. Marcos Tesouro Montecelo
>>>>>      Dpto. Predición Numérica e Investigación
>>>>>
>>>>> Rúa Roma, 6
>>>>> 15.707 Santiago de
>>>>> Compostela
>>>>>
>>>>> Tel: +34 981 957 462
>>>>> Fax: +34 981 957 466
>>>>> marcos.tesouro at meteogalicia.es <mailto:marcos.tesouro at meteogalicia.es>
>>>>> www.meteogalicia.es <http://www.meteogalicia.es>
>>>>>
>>>>> _______________________________________________
>>>>> gradsusr mailing list
>>>>> gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>
>>
>> _______________________________________________
>> gradsusr mailing list
>> gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
>> http://gradsusr.org/mailman/listinfo/gradsusr
>
> --
> Jennifer M. Adams
> IGES/COLA
> 4041 Powder Mill Road, Suite 302
> Calverton, MD 20705
> jma at cola.iges.org <mailto:jma at cola.iges.org>
>
>
>
>
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20121113/942f2cc1/attachment-0003.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cabecera.png
Type: image/png
Size: 19758 bytes
Desc: not available
Url : http://gradsusr.org/pipermail/gradsusr/attachments/20121113/942f2cc1/attachment-0003.png