[gradsusr] any grads users know why ARWpost interp_method=1 does not work for WRF v3.3.1

[SMITH, JONATHAN WYNN. (GSFC-6140)]

Thanks for your responses and help.  I have attached namelist.ARWpost, namelist.wps. and namelist.input as requested.  Please note ARWpost v3.1 is not tied to the WRFV3 directory.

Jonathan Wynn Smith, Ph. D.
jonathan.smith at nasa.gov
NASA-Goddard Space Flight Center
Code 614-Atmospheric Chemistry and Dynamics Branch
Greenbelt, MD 20771
301-614-5956

From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of SMITH, JONATHAN WYNN. (GSFC-6140)
Sent: Tuesday, June 19, 2012 2:10 PM
To: gradsusr at gradsusr.org
Subject: [gradsusr] any grads users know why ARWpost interp_method=1 does not work for WRF v3.3.1

Hello:

I have submitted this issue to wrfhelp at ucar.edu<mailto:wrfhelp at ucar.edu>.   But I thought I would try here to see if any grads users have run into the problem below using ARWpost.

For both ARWpost v2.2 and 3.1,  the interp_method = 1 is not produce .ctl and .dat files on the specified pressure levels for WRF/Chem v3.3.1 output.  However interp_method = 1 prints the .ctl and .dat  on the specified pressure levels with WRF/Chem v3.2.1 data. I have no choice but to use WRF/Chem v 3.3.1 for my research because the pre-processing emissions software for WRF/Chem includes a mercator projection that only works with v3.3.1 and not wit v3.2.


For example even with interp_method = 1 with WRF/Chem v3.3.1 output:

I get this message first

START PROCESSING DATA

   WARNING --- I do not recognize this data.
               OUTPUT FROM *             PROGRAM:WRF/CHEM V3.3.1 MODEL
               Will make an attempt to read it.

Then it just prints out the model levels

   16.19018
   16.38956
   16.58874
   16.78770
zdef   24 linear 1 1
tdef   13 linear 00Z20MAY2006      60MN
VARS    5
no2           24  0  NO2 concentration (ppmv)
no            24  0  NO concentration (ppmv)
o3            24  0  O3 concentration (ppmv)
hno3          24  0  HNO3 concentration (ppmv)
co            24  0  CO concentration (ppmv)

However with the v3.2 or v3.2.1, I do not get the messages and the data is printed on the specified pressure levels:

 225.00000
 200.00000
 175.00000
 150.00000
 125.00000
 100.00000
tdef   13 linear 01Z30MAY2006      60MN
VARS    8
no2           36  0  NO2 concentration (ppmv)
no            36  0  NO concentration (ppmv)
o3            36  0  O3 concentration (ppmv)
hno3          36  0  HNO3 concentration (ppmv)
co            36  0  CO concentration (ppmv)
tc            36  0  Temperature (C)
dbz           36  0  Reflectivity (-)
max_dbz        1  0  Max Reflectivity (-)


Thanks

Jonathan Wynn Smith, Ph. D.
jonathan.smith at nasa.gov<mailto:jonathan.smith at nasa.gov>
NASA-Goddard Space Flight Center
Code 614-Atmospheric Chemistry and Dynamics Branch
Greenbelt, MD 20771
301-614-5956

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20120619/14b1c3f5/attachment-0003.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: namelist.ARWpost
Type: application/octet-stream
Size: 599 bytes
Desc: namelist.ARWpost
Url : http://gradsusr.org/pipermail/gradsusr/attachments/20120619/14b1c3f5/attachment-0006.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: namelist.wps
Type: application/vnd.ms-works
Size: 755 bytes
Desc: namelist.wps
Url : http://gradsusr.org/pipermail/gradsusr/attachments/20120619/14b1c3f5/attachment-0003.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: namelist.input
Type: application/octet-stream
Size: 6746 bytes
Desc: namelist.input
Url : http://gradsusr.org/pipermail/gradsusr/attachments/20120619/14b1c3f5/attachment-0007.obj