Hello to all

[ibrahim Hadzismailovic]

Hi,

You don't need to open your ctl before skew.gs, just set up your path INTO
your skew.gs and just run skew.gs,:
'reinit'
'open open
/usr/local/WPS/DOMAINS/RAFAEL/PRUEBA_CON_GFS_48h/wrfprd/testNUEVO.ctl
'set t 1'
etc
I don't see td (dew point) in your ctl file? Be very careful with big and
small letters, don't mix it!!!
What are you useing, WRFtoGrADS or ARWpost, to convert your outputs form wrf
to ctl??
You MUST have outputs to PRESSURE levels, zdef!!! If u do you will gained in
your ctl file, bellow zdef
1000
950
900 etc.
With WRF you have tc and td in C and U,V compenests of wind (big letters)
then you need ti changed in
'define wspd and wdir u and v to BIG letters, U and V. if you have td and tc
in your ctl file everything would be OK!!

Let me know
Best regards,
Ibrahim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20070324/14a5a12e/attachment.html