printing grey scale with color overlay

[M.Mahakur]

Respected Heiner,

I had tried with 'set rgb 100 x x x' (which is 20 in your e-mails), with
x from 0 till 255 e.g.  ( set rgb 100 0 0 0 ....., ....,  set rgb 100 10
10 10). But could not found any change in intensity (while displaying,
not checked for hard copy!).

As shown below I wants to display varbl having values <= 0 as grey and
color shades otherwise.

palette()
'set display color'
'set gxout shaded'
*'set rbcols auto'
'set clevs 0.0 0.1 0.5 2  3  4  5  7  9  12 15 20 25 30 35'
'set ccols 100 3   17  18 19 20 21 22 23 24 25 26 27 28 29 30 '
*'set rbcols 100 3   17  18 19 20 21 22 23 24 25 26 27 28 29 30 '
'd varbl'


***************************************
function palette()
***************************************
'set rgb  16  177  213  255'
'set rgb  17  104  173  255'
'set rgb  18  0  151  250'
'set rgb  19  0  112  225'
'set rgb  20  0  83  230'
'set rgb  21  0  44  128'
'set rgb  22  0  29  85'
'set rgb  23  0  0  20'
'set rgb  24  255  250  110'
'set rgb  25  255  209  116'
'set rgb  26  255  160  80'
'set rgb  27  255  100  65'
'set rgb  28  238  95  0'
'set rgb  29  255  90  0'
'set rgb  30  122  22  0'
'set rgb 100 10    10  10'
return

Regards,

Mahakur

Heiner Körnich wrote:

> Dear Mahakur,
>
> you can change the brightness of grey with the number x in
> 'set rgb 20 x x x '
> The number 20 stands for the new defined colour.
>
> Here is a script for shaded output. In order to reset the rainbow colors
> use 'set rbcols auto'. For colored contour plot, use 'set ccols ...' and
> 'set clevs ...'.
>
> If your variable is ta:
>
> * define colour table
> 'set rgb 21 0   0  0 '
> 'set rgb 22 20 20 20 '
> 'set rgb 23 40 40 40 '
> 'set rgb 24 60 60 60 '
> 'set rgb 25 80 80 80 '
> 'set rgb 26 100 100 100 '
> 'set rgb 27 120 120 120 '
> 'set rgb 28 140 140 140 '
> 'set rgb 29 160 160 160 '
> 'set rgb 30 180 180 180 '
> 'set rgb 31 200 200 200 '
> 'set rgb 32 220 220 220 '
> 'set rgb 33 240 240 240 '
> * set rainbow sequence to grey shades
> 'set rbcols 21 22 23 24 25 26 27 28 29 30 31 32 33'
> 'set gxout shaded'
> 'd ta'
> 'set rbcols auto'
> 'set gxout contour'
> * choose colors for contours
> 'set ccols 2 3 4 5 6'
> * choose values of contours
> 'set clevs 210 220 230 240'
> 'd ta'
>
> Good luck,
> Heiner
>
> M.Mahakur wrote:
>
>> Respected Heiner,
>>
>> Thanks! It wroked and display is better (more smoothed) than my earlier
>> grey+color display. But, I can dim the  grey  shaded portion?
>>
>> Regards,
>>
>> Mahakur
>>
>> Heiner Körnich wrote:
>>
>>> Hi,
>>>
>>> you have to use always "set display color" and then define your own
>>> color scale which has only grey colors, eg.
>>> 'set rgb 20 15 15 15 '
>>>
>>> Then use the commands 'set clevs lev1 lev2 ...' and 'set ccols col1
>>> col2
>>> ...' in order to produce a grey shaded plot. These grey tones are also
>>> grey in a colored PNG file.
>>>
>>> Greetings,
>>> Heiner
>>>
>>> M.Mahakur wrote:
>>>
>>>> Respected Users,
>>>>
>>>> I can display the  grey scale shaded plots overlapped with color (for
>>>> non-zero) values using following few lines. As I wants to display all
>>>> the plots having observations and white out the UNDEF (i.e. no
>>>> satellite
>>>> pass).  But, when 'display' the gmf (stored using print) using the
>>>> 'gxtran' or PNG file from 'printim' displays all with colors (no grey)
>>>> i.e. it  does save in the files what it was in the display. How can I
>>>> over come this?
>>>>
>>>> -----------------------------------
>>>> 'set gxout shaded'
>>>> 'set display greyscale'
>>>> 'd rr'
>>>> *** DISPLAY IN GREY SHADES
>>>> 'set display color'
>>>> 'set clevs  0.1 0.5 2  3  4  5  7  9  12 15 20 25 30 35'
>>>> 'set ccols  3   17  18 19 20 21 22 23 24 25 26 27 28 29 30 '
>>>> 'd maskout(rr,rr-1.0e-33)'
>>>> **** DISPLAY NON-ZERO VALUES IN RGB COLORS
>>>> ---------
>>>>
>>>> Regards,
>>>>
>>>> Mahakur
>>>>
>>>
>>> --
>>> Heiner Körnich
>>> Dept. of Meteorology            Tel:  +46 8 164333
>>> Stockholms University, SE-106 91 Stockholm, Sweden
>>> Email: heiner at misu.su.se   www.misu.su.se/~heiner/
>>>
>>
>
> --
> Heiner Körnich
> Dept. of Meteorology            Tel:  +46 8 164333
> Stockholms University, SE-106 91 Stockholm, Sweden
> Email: heiner at misu.su.se   www.misu.su.se/~heiner/
>