<div>Jeff,</div>Thanks for sending the image. I tried something very similar using the same colors, but only with precip. Resulting image attached, along with the short script to produce it. I also attached the "USNE.png" background map used.<div>
<br></div><div>One of the differences I see between your and my image is that your displayed (foreground) image borders appear to be transparent while the plotted white is not. My image sample appears to be true in reverse, but I don't know why. Perhaps my sample script will give you a clue.</div>
<div><br></div><div>Stephen Mc<br><br><div class="gmail_quote">On Mon, Nov 8, 2010 at 8:42 PM, Jeff Chabot <span dir="ltr"><<a href="mailto:jsc219@gmail.com">jsc219@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Stephen,<br><br>Awesome idea, but GrADS still produced a map with a white background. I did confirm that the white is now a pure white: rgb 255 255 255.<br><br>Sample:<br><br><a href="http://jeffsweatherservice.com/grads/nam/test_2.png" target="_blank">http://jeffsweatherservice.com/grads/nam/test_2.png</a><br>
<br>Printim line used:<br><br>printim test_2.png png -t 200 x570 y435 -b NE.png<br><br>Colors:<br>set rgb 200 255 255 255<div class="im"><br>set rgb 30 210 180 140<br>set rgb 16 107 159 91<br>set rgb 17 90 142 75<br>set rgb 18 74 125 60<br>
set rgb 19 58 109 45<br>set rgb 20 41 92 19<br>set rgb 21 25 75 14<br>set rgb 22 253 248 2<br>set rgb 23 229 188 0<br>set rgb 24 253 149 0<br>set rgb 25 253 0 0<br>set rgb 26 212 0 0<br>set rgb 27 255 0 153<br><br>set clevs 0.01 0.05 0.10 0.25 0.50 1.00 2.00 3.00 4.00 5.00<br>
</div>
set ccols 200 16 18 19 20 22 23 24 25 26 27<br><br>I used 200 because I already had 16 and several other numbers assigned to different colors. I tried both png and gif format to see if it would make a difference, but it did not.<br>
<br>Any other ideas? I did use the full/local path to my images above.<br><br>Sincerely,<br><br><br>Jeff<br><br><div class="gmail_quote"><div class="im">On Mon, Nov 8, 2010 at 12:16 PM, <span dir="ltr"><<a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a>></span> wrote:<br>
</div><blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex"><div class="im">Send gradsusr mailing list submissions to<br>
<a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://gradsusr.org/mailman/listinfo/gradsusr" target="_blank">http://gradsusr.org/mailman/listinfo/gradsusr</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:gradsusr-owner@gradsusr.org" target="_blank">gradsusr-owner@gradsusr.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of gradsusr digest..."<br>
<br>
<br>
Today's Topics:<br>
<br></div>
1. Re: gradsusr Digest, Vol 9, Issue 18 (Jeff Chabot)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Mon, 8 Nov 2010 16:21:29 -0500<div class="im"><br>
From: Jeff Chabot <<a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a>><br></div>
Subject: Re: [gradsusr] gradsusr Digest, Vol 9, Issue 18<div class="im"><br>
To: <a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
Message-ID:<br></div>
<AANLkTi=<a href="mailto:hSyCi59RifNAgKttG0ZFeyMmz79rTGAQ8GUdp@mail.gmail.com" target="_blank">hSyCi59RifNAgKttG0ZFeyMmz79rTGAQ8GUdp@mail.gmail.com</a>><div class="im"><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br></div>
Jennifer, Jeff,<br>
<br>
I was the one that discovered the NE.png looks to the file ne.png (basically<br>
looks to lowercase files only). I resolved that problem by renaming my file<br>
NE.png to ne.png. I can use a background image now, but when I draw shaded<br>
contours over that background, I either get a black or white map area for<br>
precip =0. I can still see my background outside of the map area, but I<br>
would like to show that background inside the map area for areas that precip<br>
= 0. I thought -t 0 or -t 00 would allow me to do just that. Instead, when<br>
I used -t 0 or -t 00, I the map area is black for precip equals zero.<br>
<br>
#1: Yes I am using the file ne.png.<br>
#2: My map area background is black using the color 0 and -t 0 or -t 00.<br>
But, in the printim -t 00, that should equal transparent, not black. If I<br>
change -t 0 to white, then it the black area is now white. I am trying to<br>
use a background map behind the shaded contours for precip = 0 instead of<br>
white or black.<br>
<br>
Ultimately, my main goal here is to use a colorful basemap to my precip<br>
contour maps, instead of using just black or white, or any other solid color<br>
for that fact. And, if anyone knows how to do that, I would love to know.<br>
<br>
Once again, thanks for all your input.<br>
<br>
Sincerely,<br>
<br>
<br>
Jeff Chabot<div class="im"><br>
<br>
On Mon, Nov 8, 2010 at 11:50 AM, <<a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a>> wrote:<br>
<br>
> Send gradsusr mailing list submissions to<br>
> <a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
><br>
> To subscribe or unsubscribe via the World Wide Web, visit<br>
> <a href="http://gradsusr.org/mailman/listinfo/gradsusr" target="_blank">http://gradsusr.org/mailman/listinfo/gradsusr</a><br>
> or, via email, send a message with subject or body 'help' to<br>
> <a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a><br>
><br>
> You can reach the person managing the list at<br>
> <a href="mailto:gradsusr-owner@gradsusr.org" target="_blank">gradsusr-owner@gradsusr.org</a><br>
><br>
> When replying, please edit your Subject line so it is more specific<br>
> than "Re: Contents of gradsusr digest..."<br>
><br>
><br>
> Today's Topics:<br>
><br></div><div class="im">
> 1. Re: GrADS help, plotting shaded contour precip/ptype products<br>
> over a basemap/background (Jeffrey Duda)<br>
><br>
><br></div>
> ----------------------------------------------------------------------<br>
><br>
> Message: 1<br>
> Date: Mon, 8 Nov 2010 14:55:31 -0600<div class="im"><br>
> From: Jeffrey Duda <<a href="mailto:jdduda@iastate.edu" target="_blank">jdduda@iastate.edu</a>><br>
> Subject: Re: [gradsusr] GrADS help, plotting shaded contour<br>
> precip/ptype products over a basemap/background<br>
> To: GrADS Users Forum <<a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a>><br>
> Message-ID:<br></div>
> <AANLkTi=<a href="mailto:UuhCprPO4JG9zSvZdHJ6fo7e2gLVtP4oLUyFu@mail.gmail.com" target="_blank">UuhCprPO4JG9zSvZdHJ6fo7e2gLVtP4oLUyFu@mail.gmail.com</a>><div class="im"><br>
> Content-Type: text/plain; charset="iso-8859-1"<br>
><br>
> Jeff,<br></div><div class="im">
> 1) Did you try Jennifer's suggestion? If that doesn't work,<br>
> 2) what is your background color?<br>
><br></div>
> Jeff<br>
><div class="im"><br>
> On Mon, Nov 8, 2010 at 2:31 PM, Jeff Chabot <<a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a>> wrote:<br>
><br>
> > Jeff,<br>
> ><br>
> > I liked the idea, but that didn't help. I tried the following, both<br>
> > resulting in a black background for the map area:<br>
> ><br></div>
> > printim precip_NE.png png x570 y435 -b<div class="im"><br>
> /home/jeff/public_html/images/NE.png<br>
> > -t 00<br>
> ><br>
> > printim precip_NE.png png x570 y435 -t 00 -b<br>
> > /home/jeff/public_html/images/NE.png<br>
> ><br>
> > Example: <a href="http://jeffsweatherservice.com/grads/nam/precip_NE_2.png" target="_blank">http://jeffsweatherservice.com/grads/nam/precip_NE_2.png</a><br>
> ><br>
> > I even tried using "00" in the color table, but that had the same impact.<br>
> ><br>
> > Now, if I use the following command, the black background becomes white:<br>
> ><br></div>
> > printim precip_NE.png png x570 y435 -b<div class="im"><br>
> /home/jeff/public_html/images/NE.png<br>
> > white<br>
> ><br>
> > Thanks for the idea though.<br>
> ><br>
> ><br></div>
> > Jeff<div class="im"><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > On Mon, Nov 8, 2010 at 10:59 AM, <<a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a>> wrote:<br>
> ><br>
> >> Send gradsusr mailing list submissions to<br>
> >> <a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
> >><br>
> >> To subscribe or unsubscribe via the World Wide Web, visit<br>
> >> <a href="http://gradsusr.org/mailman/listinfo/gradsusr" target="_blank">http://gradsusr.org/mailman/listinfo/gradsusr</a><br>
> >> or, via email, send a message with subject or body 'help' to<br>
> >> <a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a><br>
> >><br>
> >> You can reach the person managing the list at<br>
> >> <a href="mailto:gradsusr-owner@gradsusr.org" target="_blank">gradsusr-owner@gradsusr.org</a><br>
> >><br>
> >> When replying, please edit your Subject line so it is more specific<br>
> >> than "Re: Contents of gradsusr digest..."<br>
> >><br>
> >><br>
> >> Today's Topics:<br>
> >><br></div><div class="im">
> >> 1. Re: GrADS help, plotting shaded contour precip/ptype products<br>
> >> over a basemap/background (Jeffrey Duda)<br>
> >><br>
> >><br></div>
> >> ----------------------------------------------------------------------<br>
> >><br>
> >> Message: 1<br>
> >> Date: Mon, 8 Nov 2010 14:04:13 -0600<div class="im"><br>
> >><br>
> >> From: Jeffrey Duda <<a href="mailto:jdduda@iastate.edu" target="_blank">jdduda@iastate.edu</a>><br>
> >> Subject: Re: [gradsusr] GrADS help, plotting shaded contour<br>
> >> precip/ptype products over a basemap/background<br>
> >> To: GrADS Users Forum <<a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a>><br>
> >> Message-ID:<br></div>
> >> <AANLkTinO=D7vgkJzwo=+60vLO5VgOZjp=<a href="mailto:4Hhr7P93qo%2B@mail.gmail.com" target="_blank">4Hhr7P93qo+@mail.gmail.com</a><<a href="mailto:4Hhr7P93qo%252B@mail.gmail.com" target="_blank">4Hhr7P93qo%2B@mail.gmail.com</a>><br>
> <<a href="mailto:4Hhr7P93qo%252B@mail.gmail.com" target="_blank">4Hhr7P93qo%2B@mail.gmail.com</a> <<a href="mailto:4Hhr7P93qo%25252B@mail.gmail.com" target="_blank">4Hhr7P93qo%252B@mail.gmail.com</a>>><div class="im">
<br>
> >> ><br>
> >><br>
> >> Content-Type: text/plain; charset="iso-8859-1"<br>
> >><br>
> >> Jeff,<br></div><div class="im">
> >> Try using a two-digit color number (i.e., 00) in the printim command as<br>
> >> per<br>
> >> the recommendation on the index page for the printim command:<br>
> >> <a href="http://www.iges.org/grads/gadoc/gradcomdprintim.html" target="_blank">http://www.iges.org/grads/gadoc/gradcomdprintim.html</a><br>
> >><br></div><div><div></div><div class="h5">
> >> Jeff<br>
> >><br>
> >> On Mon, Nov 8, 2010 at 1:41 PM, Jeff Chabot <<a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a>> wrote:<br>
> >><br>
> >> > I am using two separate color tables. For precip:<br>
> >> ><br>
> >> > *Categorical Rain<br>
> >> > set rgb 30 210 180 140<br>
> >> > set rgb 16 107 159 91<br>
> >> > set rgb 17 90 142 75<br>
> >> > set rgb 18 74 125 60<br>
> >> > set rgb 19 58 109 45<br>
> >> > set rgb 20 41 92 19<br>
> >> > set rgb 21 25 75 14<br>
> >> > set rgb 22 253 248 2<br>
> >> > set rgb 23 229 188 0<br>
> >> > set rgb 24 253 149 0<br>
> >> > set rgb 25 253 0 0<br>
> >> > set rgb 26 212 0 0<br>
> >> > set rgb 27 255 0 153<br>
> >> ><br>
> >> > set clevs 0.01 0.05 0.10 0.25 0.50 1.00 2.00 3.00 4.00 5.00<br>
> >> > set ccols 0 16 18 19 20 22 23 24 25 26 27<br>
> >> ><br>
> >> > For precip type:<br>
> >> ><br>
> >> > *Categorical Rain<br>
> >> > set rgb 16 107 159 91<br>
> >> > set rgb 17 90 142 75<br>
> >> > set rgb 18 74 125 60<br>
> >> > set rgb 19 58 109 45<br>
> >> > set rgb 20 41 92 19<br>
> >> > set rgb 21 25 75 14<br>
> >> > set rgb 22 253 248 2<br>
> >> > set rgb 23 229 188 0<br>
> >> > set rgb 24 253 149 0<br>
> >> > set rgb 25 253 0 0<br>
> >> > set rgb 26 212 0 0<br>
> >> > set rgb 27 255 0 153<br>
> >> ><br>
> >> > *Categorical Freezing Rain<br>
> >> > set rgb 28 255 188 188<br>
> >> > set rgb 29 255 172 172<br>
> >> > set rgb 30 255 156 156<br>
> >> > set rgb 31 253 140 140<br>
> >> > set rgb 32 255 124 124<br>
> >> > set rgb 33 255 108 108<br>
> >> > set rgb 34 255 96 96<br>
> >> > set rgb 35 255 80 80<br>
> >> > set rgb 36 255 64 56<br>
> >> > set rgb 37 240 32 128<br>
> >> > set rgb 38 240 16 255<br>
> >> ><br>
> >> > *Categorical Ice Pellets / Mix<br>
> >> > set rgb 39 255 200 0<br>
> >> > set rgb 40 255 180 0<br>
> >> > set rgb 41 255 160 0<br>
> >> > set rgb 42 255 140 0<br>
> >> > set rgb 43 255 124 0<br>
> >> > set rgb 44 255 108 0<br>
> >> > set rgb 45 255 96 0<br>
> >> > set rgb 46 255 80 0<br>
> >> > set rgb 47 255 64 0<br>
> >> > set rgb 48 255 32 0<br>
> >> > set rgb 49 255 16 0<br>
> >> ><br>
> >> > *Categorical Snow<br>
> >> > set rgb 50 4 233 231<br>
> >> > set rgb 51 0 173 255<br>
> >> > set rgb 52 0 148 255<br>
> >> > set rgb 53 0 123 255<br>
> >> > set rgb 54 0 104 255<br>
> >> > set rgb 55 0 85 255<br>
> >> > set rgb 56 4 67 245<br>
> >> > set rgb 57 0 38 255<br>
> >> > set rgb 58 0 14 255<br>
> >> > set rgb 59 0 0 255<br>
> >> > set rgb 60 0 0 223<br>
> >> > set rgb 61 255 255 255<br>
> >> ><br>
> >> > set clevs 0.01 0.05 0.1 0.25 0.5 1 2 3 4 5 10 10.01 10.05 10.1 10.25<br>
> >> 10.5<br>
> >> > 11 12<br>
> >> > 13 14 15 20 20.01 20.05 20.1 20.25 20.5 21 22 23 24 25 30 30.01 30.05<br>
> >> 30.1<br>
> >> > 30.25<br>
> >> > 30.5 31 32 33 34 35<br>
> >> > set ccols 0 16 18 19 20 22 23 24 25 26 27 0 39 40 41 42 43 44 45 46 47<br>
> 0<br>
> >> 0<br>
> >> > 28 29<br>
> >> > 30 31 32 33 34 35 36 0 0 50 51 52 53 54 55 56 57 58 59<br>
> >> ><br>
> >> > So, Jeff, I believe that I am using #0 correctly. But, when I do, it<br>
> >> just<br>
> >> > uses white or black as the background as in this example:<br>
> >> ><br>
> >> > <a href="http://jeffsweatherservice.com/grads/nam/ptype_NE_2.gif" target="_blank">http://jeffsweatherservice.com/grads/nam/ptype_NE_2.gif</a><br>
> >> ><br>
> >> > Thanks,<br>
> >> ><br>
> >> ><br>
> >> > Jeff<br>
> >> ><br>
> >> ><br>
> >> ><br>
> >> > On Mon, Nov 8, 2010 at 10:18 AM, <<a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a>><br>
> wrote:<br>
> >> ><br>
> >> >> Send gradsusr mailing list submissions to<br>
> >> >> <a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
> >> >><br>
> >> >> To subscribe or unsubscribe via the World Wide Web, visit<br>
> >> >><br>
> >> >> <a href="http://gradsusr.org/mailman/listinfo/gradsusr" target="_blank">http://gradsusr.org/mailman/listinfo/gradsusr</a><br>
> >> >> or, via email, send a message with subject or body 'help' to<br>
> >> >> <a href="mailto:gradsusr-request@gradsusr.org" target="_blank">gradsusr-request@gradsusr.org</a><br>
> >> >><br>
> >> >> You can reach the person managing the list at<br>
> >> >> <a href="mailto:gradsusr-owner@gradsusr.org" target="_blank">gradsusr-owner@gradsusr.org</a><br>
> >> >><br>
> >> >> When replying, please edit your Subject line so it is more specific<br>
> >> >> than "Re: Contents of gradsusr digest..."<br>
> >> >><br>
> >> >><br>
> >> >> Today's Topics:<br>
> >> >><br>
> >> >> 1. GrADS help, plotting shaded contour precip/ptype products<br>
> >> >> over a basemap/background (Jeff Chabot)<br>
> >> >> 2. Re: GrADS help, plotting shaded contour precip/ptype products<br>
> >> >> over a basemap/background (Jeffrey Duda)<br>
> >> >> 3. Problem with skewt plot using WRF output (Cristian ...)<br>
> >> >><br>
> >> >><br>
> >> >><br>
> ----------------------------------------------------------------------<br>
> >> >><br>
> >> >> Message: 1<br>
> >> >> Date: Mon, 8 Nov 2010 13:51:33 -0500<br>
> >> >> From: Jeff Chabot <<a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a>><br>
> >> >> Subject: [gradsusr] GrADS help, plotting shaded contour precip/ptype<br>
> >> >> products over a basemap/background<br>
> >> >> To: <a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
> >> >> Message-ID:<br></div></div><div class="im">
> >> >> <AANLkTinKn=<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%2BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf+FgLPz@mail.gmail.com</a><<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%2BFgLPz@mail.gmail.com</a>><br>
</div>
> <<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%2BFgLPz@mail.gmail.com</a><<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%25252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%252BFgLPz@mail.gmail.com</a>><br>
> ><br>
> >> <<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%2BFgLPz@mail.gmail.com</a><<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%25252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%252BFgLPz@mail.gmail.com</a>><br>
> <<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%25252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%252BFgLPz@mail.gmail.com</a><<a href="mailto:eTr6myE00LdycRWRxdyy5e8hpBtf%2525252BFgLPz@mail.gmail.com" target="_blank">eTr6myE00LdycRWRxdyy5e8hpBtf%25252BFgLPz@mail.gmail.com</a>><div>
<div></div><div class="h5"><br>
> ><br>
> >> ><br>
> >><br>
> >> >> ><br>
> >> >> Content-Type: text/plain; charset="iso-8859-1"<br>
> >> >><br>
> >> >><br>
> >> >> Dear GrADS Users,<br>
> >> >> I have been trying to apply a basemap to my precip/ptype shaded<br>
> contour<br>
> >> >> products on my personal website for some time now. I have<br>
> brainstormed<br>
> >> >> and<br>
> >> >> searched the GrADS online documents and have come up with ideas, but<br>
> >> they<br>
> >> >> have never worked. My latest idea was to use Google Maps terrain<br>
> data<br>
> >> as<br>
> >> >> a<br>
> >> >> background to the map. I thought it was a good idea, but I<br>
> discovered<br>
> >> >> that<br>
> >> >> I still cannot resolve the issue in that precip = 0 shows either all<br>
> >> white<br>
> >> >> or all black depending on what I choose for the background, covering<br>
> up<br>
> >> my<br>
> >> >> basemap. I really thought the following command would have resolved<br>
> >> that<br>
> >> >> issue, but it did not:<br>
> >> >><br>
> >> >> printim precip_NE_1.png png x570 y435 -b NE.png -t 0 Versions:GrADS:<br>
> >> 2.0a9<br>
> >> >> OS: Fedora 13<br>
> >> >> Sample: <a href="http://jeffsweatherservice.com/grads/nam/ptype_NE_2.png" target="_blank">http://jeffsweatherservice.com/grads/nam/ptype_NE_2.png</a><br>
> >> >><br>
> >> >> I know this can be done because of the example:<br>
> >> >><br>
> >> >> <a href="http://wxmaps.org/pix/ez.east.html" target="_blank">http://wxmaps.org/pix/ez.east.html</a><br>
> >> >><br>
> >> >> Any assistance here would be much appreciated.Sincerely,<br>
> >> >><br>
> >> >><br>
> >> >> Jeff Chabot<br>
> >> >> Email: <a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a><br>
> >> >> Web: <a href="http://jeffsweatherservice.com" target="_blank">http://jeffsweatherservice.com</a><br>
> >> >> -------------- next part --------------<br>
> >> >> An HTML attachment was scrubbed...<br>
> >> >> URL:<br>
> >> >><br>
> >><br>
> <a href="http://gradsusr.org/pipermail/gradsusr/attachments/20101108/93f97642/attachment-0001.html" target="_blank">http://gradsusr.org/pipermail/gradsusr/attachments/20101108/93f97642/attachment-0001.html</a><br>
> >> >><br>
> >> >> ------------------------------<br>
> >> >><br>
> >> >> Message: 2<br>
> >> >> Date: Mon, 8 Nov 2010 12:57:30 -0600<br>
> >> >> From: Jeffrey Duda <<a href="mailto:jdduda@iastate.edu" target="_blank">jdduda@iastate.edu</a>><br>
> >> >> Subject: Re: [gradsusr] GrADS help, plotting shaded contour<br>
> >> >> precip/ptype products over a basemap/background<br>
> >> >> To: GrADS Users Forum <<a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a>><br>
> >> >> Message-ID:<br>
> >> >> <<a href="mailto:AANLkTikPmH-Og0-6uNAi4tpUMCoZbAZ3YTqm_HXkndpV@mail.gmail.com" target="_blank">AANLkTikPmH-Og0-6uNAi4tpUMCoZbAZ3YTqm_HXkndpV@mail.gmail.com</a><br>
> ><br>
> >> >> Content-Type: text/plain; charset="iso-8859-1"<br>
> >> >><br>
> >> >><br>
> >> >> Jeff,<br>
> >> >> What color table are you using? Are you sure you have a #0 color? I<br>
> >> know<br>
> >> >> that's supposed to be the background, but perhaps you are overwriting<br>
> >> it<br>
> >> >> with some other color that has the same color as your background but<br>
> a<br>
> >> >> different color number.<br>
> >> >><br>
> >> >> Jeff Duda<br>
> >> >><br>
> >> ><br>
> >> ><br>
> >> ><br>
> >> >><br>
> >> >> On Mon, Nov 8, 2010 at 12:51 PM, Jeff Chabot <<a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a>><br>
> wrote:<br>
> >> >><br>
> >> >> > Dear GrADS Users,<br>
> >> >> > I have been trying to apply a basemap to my precip/ptype shaded<br>
> >> contour<br>
> >> >> > products on my personal website for some time now. I have<br>
> >> brainstormed<br>
> >> >> and<br>
> >> >> > searched the GrADS online documents and have come up with ideas,<br>
> but<br>
> >> >> they<br>
> >> >> > have never worked. My latest idea was to use Google Maps terrain<br>
> >> data<br>
> >> >> as a<br>
> >> >> > background to the map. I thought it was a good idea, but I<br>
> >> discovered<br>
> >> >> that<br>
> >> >> > I still cannot resolve the issue in that precip = 0 shows either<br>
> all<br>
> >> >> white<br>
> >> >> > or all black depending on what I choose for the background,<br>
> covering<br>
> >> up<br>
> >> >> my<br>
> >> >> > basemap. I really thought the following command would have<br>
> resolved<br>
> >> >> that<br>
> >> >> > issue, but it did not:<br>
> >> >> ><br>
> >> >> > printim precip_NE_1.png png x570 y435 -b NE.png -t 0<br>
> Versions:GrADS:<br>
> >> >> 2.0a9<br>
> >> >> > OS: Fedora 13<br>
> >> >> > Sample: <a href="http://jeffsweatherservice.com/grads/nam/ptype_NE_2.png" target="_blank">http://jeffsweatherservice.com/grads/nam/ptype_NE_2.png</a><br>
> >> >> ><br>
> >> >> > I know this can be done because of the example:<br>
> >> >> ><br>
> >> >> > <a href="http://wxmaps.org/pix/ez.east.html" target="_blank">http://wxmaps.org/pix/ez.east.html</a><br>
> >> >> ><br>
> >> >> > Any assistance here would be much appreciated. Sincerely,<br>
> >> >> ><br>
> >> >> ><br>
> >> >> > Jeff Chabot<br>
> >> >> > Email: <a href="mailto:jsc219@gmail.com" target="_blank">jsc219@gmail.com</a><br>
> >> >> > Web: <a href="http://jeffsweatherservice.com" target="_blank">http://jeffsweatherservice.com</a><br>
> >> >> ><br>
> >> >> ><br>
> >> >> > _______________________________________________<br>
> >> >> > gradsusr mailing list<br>
> >> >> > <a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a><br>
> >> >> > <a href="http://gradsusr.org/mailman/listinfo/gradsusr" target="_blank">http://gradsusr.org/mailman/listinfo/gradsusr</a><br>
> >> >> ><br>
> >> >> ><br>
> >> >><br>
> >> >><br>
> >> >> --<br>
> >> >> Jeff Duda<br>
> >> >> Iowa State University<br>
> >> >> Meteorology Graduate Student<br>
> >> >> 3134 Agronomy Hall<br></div></div>
> >> >> <a href="http://www.meteor.iastate.edu/%7Ejdduda" target="_blank">www.meteor.iastate.edu/~jdduda</a><<a href="http://www.meteor.iastate.edu/%7Ejdduda" target="_blank">http://www.meteor.iastate.edu/%7Ejdduda</a>><div class="im">
<br>
> <<a href="http://www.meteor.iastate.edu/%7Ejdduda" target="_blank">http://www.meteor.iastate.edu/%7Ejdduda</a>><<br>
> >> <a href="http://www.meteor.iastate.edu/%7Ejdduda" target="_blank">http://www.meteor.iastate.edu/%7Ejdduda</a>><br>
> >><br></div><div><div></div><div class="h5">
> >> >> -------------- next part --------------<br>
> >> >> An HTML attachment was scrubbed...<br>
> >> >> URL:<br>
> >> >><br>
> >><br>
> <a href="http://gradsusr.org/pipermail/gradsusr/attachments/20101108/159827b2/attachment-0001.html" target="_blank">http://gradsusr.org/pipermail/gradsusr/attachments/20101108/159827b2/attachment-0001.html</a><br>
> >> >><br>
> >> >> ------------------------------<br>
> >> >><br>
> >> >> Message: 3<br>
> >> >> Date: Mon, 8 Nov 2010 16:23:09 -0300<br>
> >> >> From: "Cristian ..." <<a href="mailto:galenso85@hotmail.com" target="_blank">galenso85@hotmail.com</a>><br>
> >> >> Subject: [gradsusr] Problem with skewt plot using WRF output<br>
> >> >> To: <<a href="mailto:gradsusr@gradsusr.org" target="_blank">gradsusr@gradsusr.org</a>><br>
> >> >> Message-ID: <SNT112-W63DF5D09C452E1C6FB44FBF4F0@phx.gbl><br>
> >> >> Content-Type: text/plain; charset="iso-8859-1"<br>
> >> >><br>
> >> >><br>
> >> >> Hello,<br>
> >> >><br>
> >> >> My name is Cristian. I am having some troubles to perform some skewt<br>
> >> >> graphics using WRF output.<br>
> >> >> I have created a binary and .ctl archives using ARWpost.<br>
> >> >> The file is OK, and no troubles are expected.<br>
> >> >><br>
> >> >> The problem starts when I want to create a skewt graphic.<br>
> >> >> The temperature and dewpoint profiles are OK, but no information<br>
> about<br>
> >> >> wind is shown. Neither the Hodograpf, nor the wind speed and<br>
> direction<br>
> >> >> profiles are shown.<br>
> >> >><br>
> >> >> No message of an error apears, and i have no idea what is happening.<br>
> >> >> Even the undef value is th same as the .ctl archive.<br>
> >> >><br>
> >> >> I am using Grads version 1.a8, in UBUNTU 9.04.<br>
> >> >><br>
> >> >> Here is the script. I only changed parameters at the top of the<br>
> >> archive.<br>
> >> >><br>
> >> >> I really appreciate your help.<br>
> >> >><br>
> >> >> Thanks<br>
> >> >><br>
> >> >><br>
> >> >><br>
> >><br>
> -----------------------------------------------------------------------------------------------------------------------------------------<br>
> >> >> * Script para construir radiosondeos<br>
> >> >><br>
> >> >> 'reinit'<br>
> >> >> 'run /home/cristian/Escritorio/Experimentos/lib/jaecol'<br>
> >> >> 'set display color white'<br>
> >> >> 'reset'<br>
> >> >><br>
> >> >> * Defino el archivo a utilizar<br>
> >> >><br>
> >> >> 'open 20081004_YSU.ctl'<br>
> >> >> *path=''<br>
> >> >><br>
> >> >> * Latitud Longitud y tiempo<br>
> >> >><br>
> >> >> lat=-46<br>
> >> >> lon=-68<br>
> >> >> time=12z04Oct2008<br>
> >> >><br>
> >> >><br>
> >> >> 'set time 'time<br>
> >> >> 'set lon 'lon<br>
> >> >> 'set lat 'lat<br>
> >> >><br>
> >> >> *Entre que niveles hace el perfil hacerlo entre 1000 y 600<br>
> >> >><br>
> >> >> levmax=925<br>
> >> >> levmin=500<br>
> >> >><br>
> >> >> 'set lev 'levmax ' ' levmin<br>
> >> >><br>
> >> >> *calculo Td a partir de HR, P y T<br>
> >> >> *'define et=(-2937.4/(t))-(4.9283*log10(t))+22.5518'<br>
> >> >> *'define es=pow(10,et)*10'<br>
> >> >> *'define e=es*0.01*hr'<br>
> >> >> *'define q=0.622*e/(lev-e)'<br>
> >> >> *'define aux1=q*1000*(1.+0.81*q)'<br>
> >> >> *'define aux2=0.2854*(1.-0.28*q)'<br>
> >> >> *'define aux3=(1000/lev)'<br>
> >> >> *'define td=243.5/((17.67/(log(e/6.11)))-1)'<br>
> >> >> *'define tc=t-273'<br>
> >> >><br>
> >> >> 'set ylopts 1 5 0.18'<br>
> >> >><br>
> >> >> plotskew(tc,td,u,v)<br>
> >> >><br>
> >> >> 'q dims'<br>
> >> >> line1=sublin(result,4)<br>
> >> >> line2=sublin(result,5)<br>
> >> >> itime1=subwrd(line1,6)<br>
> >> >> itit=substr(itime1,1,6)<br>
> >> >> itime1=subwrd(line2,6)<br>
> >> >> itime=substr(itime1,1,12)<br>
> >> >> d=substr(itime1,4,2)<br>
> >> >> m=substr(itime1,6,3)<br>
> >> >> y=substr(itime1,9,4)<br>
> >> >> h=substr(itime1,1,2)<br>
> >> >> lati=-1*lat<br>
> >> >> loni=-1*lon<br>
> >> >><br>
> >> >> 'draw title Perfil vertical de T y Td en 'lati'S y 'loni'W\'itime<br>
> >> >> 'printim 'd'.'h'sondeo.png png x600 y800 white'<br>
> >> >><br>
> >> >> function plotskew(sndtemp,snddewp,u,v)<br>
> >> >><br>
> >> >> *El valor Undef que se coloca ac? debe coincidir con el valor undef<br>
> del<br>
> >> >> CTL, sin? hay problemas<br>
> >> >> *en la construcci?n de la hod?grafa y del perfil vertical de viento.<br>
> >> >> undef=1.e30<br>
> >> >><br>
> >><br>
> *************************************************************************<br>
> >> >> *<br>
> >> >> * GrADS Script to Plot a SkewT/LogP Diagram<br>
> >> >> *<br>
> >> >> * Bob Hart<br>
> >> >> * Penn State University / Dept of Meteorology<br>
> >> >> * Last Update: January 23, 2001<br>
> >> >> *<br>
> >> >> * Recent Changes:<br>
> >> >> *<br>
> >> >> * 01/23/01 - Fixed a small bug in the theta-e calculation.<br>
> >> >> * Errors averaged 0.5-3K. Thank you George Bryan.<br>
> >> >> *<br>
> >> >> * 11/10/99 - Change in calculation method for CAPE/CIN. Trapezoid<br>
> >> >> * integration method is now used. Speeds up execution<br>
> >> >> * by 25%, and increases accuracy by 5-10%.<br>
> >> >> *<br>
> >> >> * 10/18/99 - Minor glitch fixed that occasionally caused crash.<br>
> >> >> *<br>
> >> >> * 8/26/99 - Datasets with missing data can now be used.<br>
> >> >> *<br>
> >> >> * Features:<br>
> >> >> * - All features of standard skewt/logp plot<br>
> >> >> * - RH sounding<br>
> >> >> * - LCL location<br>
> >> >> * - Parcel trajectory for both sfc based convection and elevated<br>
> from<br>
> >> >> * most unstable level (highest theta-e level reported)<br>
> >> >> * - Stability indices and precipitable water calculations<br>
> >> >> * - CAPE & CIN Calculations<br>
> >> >> * - Wind Profile<br>
> >> >> * - Hodograph / Hodograph scaling<br>
> >> >> * - Helicity and SR Helicity Calculations and Display<br>
> >> >> * - Color aspects of output<br>
> >> >> * - Line Thickness, style aspects of output<br>
> >> >> * - Can be run in either PORTRAIT or LANDSCAPE mode.<br>
> >> >> *<br>
> >> >> * There are numerous tunable parameters below to change the structure<br>
> >> >> * and output for the diagram.<br>
> >> >> *<br>
> >> >> * Function Arguments:<br>
> >> >> * sndtemp - temperature data (Celsius) as a function of pressure<br>
> >> >> * snddewp - dewpoint data (Celsius) as a function of pressure<br>
> >> >> * sndspd - wind speed data (knots) as a function of pressure<br>
> >> >> * snddir - wind direction data as a function of pressure<br>
> >> >> *<br>
> >> >> * Use '-1' for any of the above 4 arguments to indicate that you<br>
> >> >> * are not passing that variable. The appropriate options will<br>
> >> >> * be ignored based on your specifying '-1' for that variable.<br>
> >> >> *<br>
> >> >> * NOTE: Make sure to set the vertical range of the plot before<br>
> >> running.<br>
> >> >> * I.e., "SET LEV 1050 150", for example. This does not have<br>
> to<br>
> >> >> * be limited to the pressure range of your data.<br>
> >> >> *<br>
> >> >> * Labelling: Pressure/Height is labelled along left side.<br>
> Temperature<br>
> >> is<br>
> >> >> * labelled along bottom. Mixing ratio is labelled along<br>
> >> right<br>
> >> >> * side/top.<br>
> >> >> *<br>
> >> >> *<br>
> >> >> * PROBLEMS: First check out the web page for the script (which also<br>
> >> >> * has a link to a FAQ with answers to many common<br>
> questions<br>
> >> >> * about using the script):<br></div></div>
> >> >> * <a href="http://www.ems.psu.edu/%7Ehart/skew.html" target="_blank">http://www.ems.psu.edu/~hart/skew.html</a><<a href="http://www.ems.psu.edu/%7Ehart/skew.html" target="_blank">http://www.ems.psu.edu/%7Ehart/skew.html</a>><br>
> <<a href="http://www.ems.psu.edu/%7Ehart/skew.html" target="_blank">http://www.ems.psu.edu/%7Ehart/skew.html</a>><br>
> >> <<a href="http://www.ems.psu.edu/%7Ehart/skew.html" target="_blank">http://www.ems.psu.edu/%7Ehart/skew.html</a>><div><div></div><div class="h5"><br>
> >><br>
> >> >> *<br>
> >> >> * Please send any further problems, comments, or suggestions to<br>
> >> >> * <<a href="mailto:hart@ems.psu.edu" target="_blank">hart@ems.psu.edu</a>><br>
> >> >> *<br>
> >> >> * ACKNOWLEDGMENTS: Thanks go to the innumerable users who have<br>
> helped<br>
> >> >> * fine tune the script from the horrible mess from which it began.<br>
> >> >> * In particular, thanks go out to Steve Lord (NCEP), Mike Fiorino<br>
> >> (ECMWF),<br>
> >> >> * George Bryan (PSU), Davide Sacchetti (CMIRL), and Enrico Minguzzi<br>
> >> >> (CMIRL).<br>
> >> >> *<br>
> >> >><br>
> >><br>
> **************************************************************************<br>
> >> >> * !!!!! BEGINNING OF USER-SPECIFIED OPTIONS !!!!!!<br>
> >> >><br>
> >><br>
> **************************************************************************<br>
> >> >> *<br>
> >> >> * --------------------- Initialization options<br>
> ----------------------<br>
> >> >> *<br>
> >> >> * ClrScrn = Whether to clear the screen before drawing diagram<br>
> >> >> * [1 = yes, 0 = no]<br>
> >> >><br>
> >> >> ClrScrn = 1<br>
> >> >><br>
> >> >> *<br>
> >> >> * ------------------- Define Skew-T Diagram<br>
> >> Shape/Slope-----------------<br>
> >> >> *<br>
> >> >> * (P1,T1) = Pres, Temp of some point on left-most side<br>
> >> >> * (P2,T2) = Pres, Temp of some point on right-most side<br>
> >> >> * (P3,T3) = Pres, Temp of some point in diagram which is mid-point<br>
> >> >> * in the horizontal between 1 and 2.<br>
> >> >> *<br>
> >> >> * P1, P2, P3 are in mb ; T1, T2, T3 are in Celsius<br>
> >> >> *<br>
> >> >> * These define the SLOPE and WIDTH of the diagram as you see it but<br>
> DO<br>
> >> NOT<br>
> >> >> * DEFINE THE HEIGHT of the diagram as you see it. In other words,<br>
> >> >> * 1 and 2 do NOT necessarily need to be at the bottom of the diagram<br>
> >> and<br>
> >> >> * 3 does NOT necessarily need to be at the top. THE VERTICAL<br>
> PRESSURE<br>
> >> >> * RANGE OF THE SKEWT AS YOU SEE IT IS DETERMINED BY YOUR 'SET Z ...'<br>
> >> >> * COMMAND OR THE 'SET LEV ...' COMMAND BEFORE RUNNING THIS SCRIPT.<br>
> >> >> *<br>
> >> >> * _______________________<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | 3 |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * | |<br>
> >> >> * |1 2|<br>
> >> >> * | |<br>
> >> >> * |_______________________|<br>
> >> >> *<br>
> >> >> *<br>
> >> >> * A good set of defining points are given below. Feel free<br>
> >> >> * to experiment with variations.<br>
> >> >><br>
> >> >><br>
> >> >> *P1 = 1000<br>
> >> >> *T1 = -40<br>
> >> >><br>
> >> >> *P2 = 1000<br>
> >> >> *T2 = 40<br>
> >> >><br>
> >> >> *P3 = 200<br>
> >> >> *T3 = 0<br>
> >> >><br>
> >> >> * Another good set of defining points suggested by Juan Ruiz<br>
> (Emagrama)<br>
> >> >> * are:<br>
> >> >> *<br>
> >> >> P1 = 1000<br>
> >> >> T1 = -80<br>
> >> >> *<br>
> >> >> P2 = 1000<br>
> >> >> T2 = 40<br>
> >> >> *<br>
> >> >> P3 = 500<br>
> >> >> T3 = -20<br>
> >> >><br>
> >> >> * ------------------- Contour Intervals / Levels<br>
> >> >> --------------------------<br>
> >> >> *<br>
> >> >> * All variables below are contour intervals/levels for diagram<br>
> >> >> *<br>
> >> >> * Thetaint = interval for potential temperature lines<br>
> >> >> * Thetwint = interval for moist pseudo adiabats<br>
> >> >> * tempint = interval for temperature lines<br>
> >> >> * wsclevs = contour LEVELS for mixing ratio lines<br>
> >> >> *<br>
> >> >> *<br>
> >> >> thetaint= 20<br>
> >> >> thetwint= 10<br>
> >> >> tempint = 10<br>
> >> >> wsclevs = ".1 .5 1 3 6 10 15 20 25 30"<br>
> >> >> *<br>
> >> >> *<br>
> >> >> * ------------------------ Output Options<br>
> >> --------------------------------<br>
> >> >> *<br>
> >> >> * All variables below are logical .. 1=yes, 0=no, unless otherwise<br>
> >> >> * specified.<br>
> >> >> *<br>
> >> >> * DrawBarb = Draw wind barbs along right side of plot<br>
> >> >> * DrawThet = Draw dry adiabats<br>
> >> >> * DrawThtw = Draw moist pseudo-adiabats<br>
> >> >> * DrawTemp = Draw temperature lines<br>
> >> >> * DrawMix = Draw mixing ratio lines<br>
> >> >> * DrawTSnd = Draw temperature sounding<br>
> >> >> * DrawDSnd = Draw dewpoint sounding<br>
> >> >> * DrawRH = Draw relative humidity sounding<br>
> >> >> * DrawPrcl = Draw parcel path from surface upward<br>
> >> >> * DrawPMax = Draw parcel path from most unstable level upward<br>
> >> >> * DrawIndx = Display stability indices & CAPE<br>
> >> >> * DrawHeli = Calculate and display absolute and storm-relative<br>
> helicity<br>
> >> >> * DrawHodo = Draw hodograph<br>
> >> >> * DrawPLev = Draw Pressure Levels<br>
> >> >> * DrawZLev = Draw height levels and lines<br>
> >> >> * 0 = no lines<br>
> >> >> * 1 = above ground level (AGL)<br>
> >> >> * 2 = above sea level (ASL)<br>
> >> >> * DrawZSTD = Draw Height levels using standard atm lapse rate<br>
> >> >> * LblAxes = Label the x,y axes (temperature, pressure,mixing ratio)<br>
> >> >> *<br>
> >> >> * ThtwStop = Pressure level at which to stop drawing Theta-w lines<br>
> >> >> * MixStop = Pressure level at which to stop drawing Mixratio lines<br>
> >> >><br>
> >> >> DrawBarb= 1<br>
> >> >> DrawThet= 1<br>
> >> >> DrawThtw= 1<br>
> >> >> DrawTemp= 1<br>
> >> >> DrawMix = 1<br>
> >> >> DrawTSnd= 1<br>
> >> >> DrawDSnd= 1<br>
> >> >> DrawRH = 0<br>
> >> >> DrawPrcl= 1<br>
> >> >> DrawPMax= 1<br>
> >> >> DrawIndx= 1<br>
> >> >> DrawHeli= 0<br>
> >> >> DrawHodo= 1<br>
> >> >> DrawPLev= 1<br>
> >> >> DrawZLev= 0<br>
> >> >> DrawZSTD= 0<br>
> >> >> LblAxes = 1<br>
> >> >><br>
> >> >> ThtwStop = 200<br>
> >> >> MixStop = 400<br>
> >> >><br>
> >> >><br>
> >> >> *<br>
> >> >> * ----------------- Sounding Geography options<br>
> >> ------------------------<br>
> >> >> *<br>
> >> >> * SfcElev = Elevation above sea-level (meters) of lowest level<br>
> reported<br>
> >> >> * in sounding. Used only if DrawZLev = 2<br>
> >> >><br>
> >> >> SfcElev = 0<br>
> >> >><br>
> >> >><br>
> >> >> *<br>
> >> >> * ------------------ Thermodynamic Index Options --------------------<br>
> >> >> *<br>
> >> >> * All variables here are in inches. Use -1 for the default values.<br>
> >> >> *<br>
> >> >> * Text1XC = X-location of midpoint of K,TT,PW output box<br>
> >> >> * Text1YC = Y-location of midpoint of K,TT,PW output box<br>
> >> >> * Text2XC = X-Location of midpoint of surface indices output box<br>
> >> >> * Text2YC = Y-location of midpoint of surface indices output box<br>
> >> >> * Text3XC = X-Location of midpoint of most unstable level-based<br>
> >> indices<br>
> >> >> * output box<br>
> >> >> * Text3YC = Y-location of midpoint of most unstable level-based<br>
> >> indices<br>
> >> >> * output box<br>
> >> >><br>
> >> >> Text1XC = -1<br>
> >> >> Text1YC = -1<br>
> >> >> Text2XC = -1<br>
> >> >> Text2YC = -1<br>
> >> >> Text3XC = -1<br>
> >> >> Text3YC = -1<br>
> >> >><br>
> >> >> *<br>
> >> >> * ----------------- Wind Barb Profile Options<br>
> >> ----------------------------<br>
> >> >> *<br>
> >> >> * All variables here are in units of inches, unless otherwise<br>
> specified<br>
> >> >> *<br>
> >> >> * barbint = Interval for plotting barbs (in units of levels)<br>
> >> >> * poleloc = X-Location of profile. Choose -1 for the default.<br>
> >> >> * polelen = Length of wind-barb pole<br>
> >> >> * Len05 = Length of each 5-knot barb<br>
> >> >> * Len10 = Length of each 10-knot barb<br>
> >> >> * Len50 = Length of each 50-knot flag<br>
> >> >> * Wid50 = Width of base of 50-knot flag<br>
> >> >> * Spac50 = Spacing between 50-knot flag and next ror occurred on<br>
> >> >> libarb/flag<br>
> >> >> * Spac10 = Spacing between 10-knot flag and next flag<br>
> >> >> * Spac05 = Spacing between 5-knot flag and next flag<br>
> >> >> * Flagbase= Draw flagbase (filled circle) for each windbarb [1=yes,<br>
> 0<br>
> >> >> =no]<br>
> >> >> * Fill50 = Solid-fill 50-knot flag [1=yes, 0=no]<br>
> >> >> * barbline= Draw a vertical line connecting all the wind barbs<br>
> [1=yes,<br>
> >> >> 0=no]<br>
> >> >> *<br>
> >> >> barbint = 1<br>
> >> >> poleloc = -1<br>
> >> >> polelen = 0.35<br>
> >> >> len05 = 0.07<br>
> >> >> len10 = 0.15<br>
> >> >> len50 = 0.15<br>
> >> >> wid50 = 0.06<br>
> >> >> spac50 = 0.07<br>
> >> >> spac10 = 0.05<br>
> >> >> spac05 = 0.05<br>
> >> >> Fill50 = 1<br>
> >> >> flagbase= 1<br>
> >> >> barbline= 1<br>
> >> >><br>
> >> >> *<br>
> >> >> *<br>
> >> >> *---------------- Hodograph Options<br>
> >> -------------------------------------<br>
> >> >> *<br>
> >> >> * All variables here are in units of inches, unless otherwise<br>
> specified<br>
> >> >> *<br>
> >> >> * HodXcent= x-location of hodograph center. Use -1 for default<br>
> >> location.<br>
> >> >> * HodYcent= y-location of hodograph center. Use -1 for default<br>
> >> location.<br>
> >> >> * HodSize = Size of hodograph in inches<br>
> >> >> * NumRing = Number of rings to place in hodograph (must be at least<br>
> 1)<br>
> >> >> * HodRing = Wind speed increment of each hodograph ring<br>
> >> >> * HodoDep = Depth (above lowest level in mb) of end of hodograph<br>
> trace<br>
> >> >> * TickInt = Interval (in kts) at which tick marks are drawn along the<br>
> >> axes<br>
> >> >> * Use 0 for no tick marks.<br>
> >> >> * TickSize= Size of tick mark in inches<br>
> >> >> * Text4XC = X-location of midpoint of hodograph text output. Use -1<br>
> for<br>
> >> >> default.<br>
> >> >> * Text4YC = Y-location of midpoint of hodograph text output. Use -1<br>
> for<br>
> >> >> default.<br>
> >> >><br>
> >> >> HodXcent= 6<br>
> >> >> HodYcent= 9<br>
> >> >> HodSize = 2<br>
> >> >> NumRing = 3<br>
> >> >> HodRing = 10<br>
> >> >> HodoDep = 500<br>
> >> >> TickInt = 5<br>
> >> >> TickSize= 0.1<br>
> >> >> Text4XC = -1<br>
> >> >> Text4YC = -1<br>
> >> >><br>
> >> >> *--------------- Helicity Options<br>
> >> ---------------------------------------<br>
> >> >> *<br>
> >> >> * MeanVTop = Top pressure level (mb) of mean-wind calculation<br>
> >> >> * MeanVBot = Bottom pressure level (mb) of mean-wind calculation<br>
> >> >> * HelicDep = Depth in mb (above ground) of helicity integration<br>
> >> >> * StormMot = Type of storm motion estimation scheme. Use following:<br>
> >> >> * 0 = No departure from mean wind.<br>
> >> >> * 1 = Davies-Jones (1990) approach<br>
> >> >> * FillArrw = Whether to fill the arrowhead of the storm motion vector<br>
> >> >> * [1 = yes, 0 = no]<br>
> >> >><br>
> >> >> MeanVTop= 300<br>
> >> >> MeanVBot= 850<br>
> >> >> HelicDep= 300<br>
> >> >> StormMot= 0<br>
> >> >> FillArrw= 1<br>
> >> >><br>
> >> >> *<br>
> >> >> *---------------- Color Options<br>
> >> ------------------------------------------<br>
> >> >> *<br>
> >> >> * ThetCol = Color of dry adiabats<br>
> >> >> * TempCol = Color of temperature lines<br>
> >> >> * MixCol = Color of mixing ratio lines<br>
> >> >> * ThtwCol = Color of moist adiabats<br>
> >> >> * TSndCol = Color of Temperature Sounding<br>
> >> >> * DSndCol = Color of Dewpoint Sounding<br>
> >> >> * RHCol = Color of RH Sounding<br>
> >> >> * PrclCol = Color of parcel trace<br>
> >> >> * BarbCol = Color of wind barbs (choose -1 for color according to<br>
> >> speed)<br>
> >> >> * HodoCol = Color of hodograph trace<br>
> >> >><br>
> >> >> ThetCol = 23<br>
> >> >> TempCol = 79<br>
> >> >> MixCol = 38<br>
> >> >> ThtwCol = 39<br>
> >> >> TSndCol = 29<br>
> >> >> DSndCol = 49<br>
> >> >> RHCol = 3<br>
> >> >> PrclCol = 1<br>
> >> >> BarbCol = 1<br>
> >> >> HodoCol = 2<br>
> >> >><br>
> >> >> *<br>
> >> >> *-------------------- Line Style Options<br>
> >> >> ------------------------------------<br>
> >> >> *<br>
> >> >> * GrADS Styles: 1=solid;2=long dash;3=short dash;4=long,short dashed;<br>
> >> >> * 5=dotted;6=dot dash;7=dot dot dash<br>
> >> >> *<br>
> >> >> * ThetLine = Line Style of dry adiabats<br>
> >> >> * TempLine = Line Style of temperature lines<br>
> >> >> * MixLine = Line Style of mixing ratio lines<br>
> >> >> * ThtwLine = Line Style of moist adiabats<br>
> >> >> * TSndLine = Line Style of Temperature Sounding<br>
> >> >> * DSndLine = Line Style of Dewpoint Sounding<br>
> >> >> * RHLine = Line Style of RH sounding<br>
> >> >> * PrclLine = Line Style of parcel trace<br>
> >> >> * HodoLine = Line Style of hodograph trace<br>
> >> >> *<br>
> >> >><br>
> >> >> ThetLine = 1<br>
> >> >> TempLine = 1<br>
> >> >> MixLine = 5<br>
> >> >> ThtwLine = 2<br>
> >> >> TSndLine = 1<br>
> >> >> DSndLine = 2<br>
> >> >> RHLine = 1<br>
> >> >> PrclLine = 3<br>
> >> >> HodoLine = 1<br>
> >> >><br>
> >> >> *<br>
> >> >> *------------------- Line Thickness<br>
> >> >> Options---------------------------------<br>
> >> >> * GrADS Line Thickness: increases with increasing number. Influences<br>
> >> >> * hardcopy output more strongly than screen<br>
> >> output.<br>
> >> >> *<br>
> >> >> *<br>
> >> >> * ThetThk = Line Thickness of dry adiabats<br>
> >> >> * TempThk = Line Thickness of temperature lines<br>
> >> >> * MixThk = Line Thickness of mixing ratio lines<br>
> >> >> * ThtwThk = Line Thickness of moist adiabats<br>
> >> >> * TSndThk = Line Thickness of temperature sounding<br>
> >> >> * DSndThk = Line thickness of dewpoint sounding<br>
> >> >> * RHThk = Line thickness of RH sounding<br>
> >> >> * PrclThk = Line thickness of parcel trace<br>
> >> >> * HodoThk = Line thickness of hodograph trace<br>
> >> >> * BarbThk = Line thickness of wind barbs<br>
> >> >><br>
> >> >> ThetThk = 3<br>
> >> >> TempThk = 1<br>
> >> >> MixThk = 7<br>
> >> >> ThtwThk = 3<br>
> >> >> TSndThk = 12<br>
> >> >> DSndThk = 12<br>
> >> >> RHThk = 8<br>
> >> >> PrclThk = 6<br>
> >> >> HodoThk = 6<br>
> >> >> BarbThk = 2<br>
> >> >><br>
> >> >> *<br>
> >> >> *------------------- Data Point Marker Options<br>
> >> >> -----------------------------<br>
> >> >> * GrADS Marker Types: 0 = none ; 1 = cross ; 2 = open circle ;<br>
> >> >> * 3 = closed circle ; 4 = open square ; 5 =<br>
> closed<br>
> >> >> square<br>
> >> >> * 6 = X ; 7 = diamond ; 8 = triangle ; 9 = none<br>
> >> >> * 10 = open circle with vertical line ; 11 = open<br>
> >> oval<br>
> >> >> *<br>
> >> >> * TSndMrk = Mark type of data point marker for temperature sounding<br>
> >> >> * DSndMrk = Mark type of data point marker for dewpoint sounding<br>
> >> >> * RHMrk = Mark type of data point marker for relative humidity<br>
> >> sounding<br>
> >> >> * MrkSize = Mark size (inches) of each data marker<br>
> >> >><br>
> >> >> TSndMrk = 3<br>
> >> >> DSndMrk = 3<br>
> >> >> RHMrk = 0<br>
> >> >> MrkSize = 0.1<br>
> >> >><br>
> >> >><br>
> >> >> * !!!!! YOU SHOULD NOT NEED TO CHANGE ANYTHING BELOW HERE !!!!!<br>
> >> >><br>
> >> >><br>
> >><br>
> ****************************************************************************<br>
> >> >><br>
> >> >> *-------------------------------------------<br>
> >> >> * grab user-specified environment dimensions<br>
> >> >> *-------------------------------------------<br>
> >> >><br>
> >> >> "q dims"<br>
> >> >> rec=sublin(result,2)<br>
> >> >> _xtype=subwrd(rec,3)<br>
> >> >> _xval=subwrd(rec,9)<br>
> >> >> rec=sublin(result,3)<br>
> >> >> _yval=subwrd(rec,9)<br>
> >> >> _ytype=subwrd(rec,3)<br>
> >> >> rec=sublin(result,4)<br>
> >> >> _ptype=subwrd(rec,3)<br>
> >> >> _pmax=subwrd(rec,6)<br>
> >> >> _pmin=subwrd(rec,8)<br>
> >> >> _zmin=subwrd(rec,11)<br>
> >> >> _zmax=subwrd(rec,13)<br>
> >> >> rec=sublin(result,5)<br>
> >> >> _ttype=subwrd(rec,3)<br>
> >> >> _tval=subwrd(rec,9)<br>
> >> >><br>
> >> >> "q file"<br>
> >> >> rec=sublin(result,5)<br>
> >> >> _zmaxfile=subwrd(rec,9)<br>
> >> >><br>
> >> >> *-------------------------------------------------------------<br>
> >> >> * Check to ensure that dimensions are valid. Warn & exit if not.<br>
> >> >> *--------------------------------------------------------------<br>
> >> >><br>
> >> >> dimrc=0<br>
> >> >> If (_xtype != "fixed")<br>
> >> >> say "X-Dims Error: Not fixed. Use 'set lon' or 'set x' to specify<br>
> a<br>
> >> >> value."<br>
> >> >> dimrc=-1<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (_ytype != "fixed")<br>
> >> >> say "Y-Dims Error: Not fixed. Use 'set lat' or 'set y' to specify<br>
> a<br>
> >> >> value"<br>
> >> >> dimrc=-1<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (_ptype != "varying")<br>
> >> >> say "Z-Dims Error: Not varying. Use 'set lev' or 'set z' to<br>
> specify<br>
> >> a<br>
> >> >> range."<br>
> >> >> dimrc=-1<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (_ttype != "fixed")<br>
> >> >> say "Time Error: Not fixed. Use 'set time' or 'set t' to<br>
> specify<br>
> >> a<br>
> >> >> value"<br>
> >> >> dimrc=-1<br>
> >> >> Endif<br>
> >> >><br>
> >> >><br>
> >> >> If (dimrc < 0)<br>
> >> >> Return(-1)<br>
> >> >> Endif<br>
> >> >><br>
> >> >><br>
> >> >> *<br>
> >> >> * A few global variables used in units conversion<br>
> >> >> *<br>
> >> >><br>
> >> >> _pi=3.14159265<br>
> >> >> _dtr=_pi/180<br>
> >> >> _rtd=1/_dtr<br>
> >> >> _ktm=0.514444<br>
> >> >> _mtk=1/_ktm<br>
> >> >><br>
> >> >> * A few global constants used in thermo calcs<br>
> >> >><br>
> >> >> _C0=0.99999683<br>
> >> >> _C1=-0.90826951/100<br>
> >> >> _C2= 0.78736169/10000<br>
> >> >> _C3=-0.61117958/1000000<br>
> >> >> _C4= 0.43884187/pow(10,8)<br>
> >> >> _C5=-0.29883885/pow(10,10)<br>
> >> >> _C6= 0.21874425/pow(10,12)<br>
> >> >> _C7=-0.17892321/pow(10,14)<br>
> >> >> _C8= 0.11112018/pow(10,16)<br>
> >> >> _C9=-0.30994571/pow(10,19)<br>
> >> >><br>
> >> >> *Calculo la direcci?n e intensidad del viento usando las funciones<br>
> >> GetWdir<br>
> >> >> y GetWsp<br>
> >> >><br>
> >> >><br>
> >> >><br>
> >> >><br>
> >> >><br>
> >> >><br>
> >> >> * A pressure array of power calculations which should be performed<br>
> >> >> * only once to reduce execution time.<br>
> >> >><br>
> >> >> zz=1100<br>
> >> >> while (zz > 10)<br>
> >> >> subscr=zz/10<br>
> >> >> _powpres.subscr=pow(zz,0.286)<br>
> >> >> zz=zz-10<br>
> >> >> endwhile<br>
> >> >><br>
> >> >> *<br>
> >> >> * Turn off options not available due to user data limitations<br>
> >> >> *<br>
> >> >><br>
> >> >> If (ClrScrn = 1)<br>
> >> >> "clear"<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (sndspd = -1 | snddir = -1)<br>
> >> >> DrawBarb = 0<br>
> >> >> DrawHodo = 0<br>
> >> >> DrawHeli = 0<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (snddewp = -1)<br>
> >> >> DrawDSnd = 0<br>
> >> >> DrawRH = 0<br>
> >> >> DrawPrcl = 0<br>
> >> >> DrawPMax = 0<br>
> >> >> DrawIndx = 0<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (sndtemp = -1)<br>
> >> >> DrawTSnd = 0<br>
> >> >> DrawRH = 0<br>
> >> >> DrawPrcl = 0<br>
> >> >> DrawPMax = 0<br>
> >> >> DrawIndx = 0<br>
> >> >> DrawZLev = 0<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (NumRing < 1)<br>
> >> >> DrawHodo = 0<br>
> >> >> Endif<br>
> >> >><br>
> >> >> "q gxinfo"<br>
> >> >> rec=sublin(result,2)<br>
> >> >> xsize=subwrd(rec,4)<br>
> >> >><br>
> >> >> If (xsize = 11)<br>
> >> >> PageType = "Landscape"<br>
> >> >> Else<br>
> >> >> PageType = "Portrait"<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *------------------------------------------------------<br>
> >> >> * calculate constants determining slope/shape of diagram<br>
> >> >> * based on temp/pressure values given by user<br>
> >> >> *-------------------------------------------------------<br>
> >> >><br>
> >> >> "set x 1"<br>
> >> >> "set y 1"<br>
> >> >> "set z 1"<br>
> >> >> "set t 1"<br>
> >> >> _m1=(T1+T2-2*T3)/(2*log10(P2/P3))<br>
> >> >> _m2=(T2-T3-_m1*log10(P2/P3))/50<br>
> >> >> _m3=(T1-_m1*log10(P1))<br>
> >> >><br>
> >> >> "set z "_zmin" "_zmax<br>
> >> >> "set zlog on"<br>
> >> >> "set xlab off"<br>
> >> >><br>
> >> >> *-------------------------------------------------<br>
> >> >> * perform coordinate transformation to Skew-T/LogP<br>
> >> >> *-------------------------------------------------<br>
> >> >><br>
> >> >> "set gxout stat"<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set t "_tval<br>
> >> >> "define tempx=("sndtemp"-"_m1"*log10(lev)-"_m3")/"_m2<br>
> >> >> "define dewpx=("snddewp"-"_m1"*log10(lev)-"_m3")/"_m2<br>
> >> >><br>
> >> >> If (PageType = "Portrait")<br>
> >> >> "set parea 0.7 7 0.75 10"<br>
> >> >> Else<br>
> >> >> "set parea 0.7 6.5 0.5 8"<br>
> >> >> Endif<br>
> >> >><br>
> >> >> "set axlim 0 100"<br>
> >> >> "set lon 0 100"<br>
> >> >> "set grid on 1 1"<br>
> >> >><br>
> >> >> "set z "_zmin " " _zmax<br>
> >> >> "set lon 0 100"<br>
> >> >> "set clevs -900"<br>
> >> >> "set gxout contour"<br>
> >> >><br>
> >> >> *-------------------------------------<br>
> >> >> * Draw pressure lines<br>
> >> >> *-------------------------------------<br>
> >> >><br>
> >> >> If (DrawPLev = 0)<br>
> >> >> "set ylab off"<br>
> >> >> Else<br>
> >> >> "set ylab on"<br>
> >> >> "set ylopts 1 5 0.18"<br>
> >> >> "set xlopts 1 3 0.18"<br>
> >> >> Endif<br>
> >> >><br>
> >> >> "d lon"<br>
> >> >><br>
> >> >> *--------------------------------------<br>
> >> >> * Determine corners of skewt/logp frame<br>
> >> >> *--------------------------------------<br>
> >> >><br>
> >> >> "q w2xy 100 "_pmin<br>
> >> >> rxloc=subwrd(result,3)<br>
> >> >> tyloc=subwrd(result,6)<br>
> >> >> "q w2xy 0 "_pmax<br>
> >> >> lxloc=subwrd(result,3)<br>
> >> >> byloc=subwrd(result,6)<br>
> >> >><br>
> >> >> If (DrawPLev = 1 & LblAxes = 1)<br>
> >> >> "set strsiz 0.15"<br>
> >> >> "set string 1 c 3 0"<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> * "draw string 0.5 10.5 hPa."<br>
> >> >> Else<br>
> >> >> "draw string 0.5 8.35 hPa."<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *---------------------------------------------------<br>
> >> >> * Calculate & draw actual height lines using temp data<br>
> >> >> *---------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawZLev > 0)<br>
> >> >> say "Calculating observed height levels from temp/pressure data."<br>
> >> >> zz=1<br>
> >> >> "set gxout stat"<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set t "_tval<br>
> >> >> count=0<br>
> >> >> while (zz < _zmax)<br>
> >> >> "set z "zz<br>
> >> >> pp.zz=subwrd(result,4)<br>
> >> >> lpp.zz=log(pp.zz)<br>
> >> >> "d "sndtemp<br>
> >> >> rec=sublin(result,8)<br>
> >> >> tt=subwrd(rec,4)<br>
> >> >> if (tt > -900)<br>
> >> >> tk=tt+273.15<br>
> >> >> count=count+1<br>
> >> >> zzm=zz-1<br>
> >> >> If (count = 1)<br>
> >> >> If (DrawZLev = 2)<br>
> >> >> htlb="ASL"<br>
> >> >> height.zz=SfcElev<br>
> >> >> Else<br>
> >> >> htlb="AGL"<br>
> >> >> height.zz=0<br>
> >> >> Endif<br>
> >> >> sfcz=height.zz<br>
> >> >> Else<br>
> >> >><br>
> >> >><br>
> DZ=29.2857*(lpp.zzm-lpp.zz)*(lpp.zz*tk+lpp.zzm*tkold)/(lpp.zz+lpp.zzm)<br>
> >> >> height.zz=height.zzm+DZ<br>
> >> >> highz=height.zz<br>
> >> >> Endif<br>
> >> >> else<br>
> >> >> height.zz = -9999<br>
> >> >> endif<br>
> >> >> tkold=tk<br>
> >> >> zz=zz+1<br>
> >> >> endwhile<br>
> >> >><br>
> >> >> maxht=int(highz/1000)<br>
> >> >> if (int(sfcz/1000) = sfcz/1000)<br>
> >> >> minht=int(sfcz/1000)<br>
> >> >> else<br>
> >> >> minht=1+int(sfcz/1000)<br>
> >> >> endif<br>
> >> >><br>
> >> >> ht=minht<br>
> >> >> "set line 1 3 1"<br>
> >> >> "set strsiz 0.10"<br>
> >> >> "set string 1 l 3 0"<br>
> >> >> while (ht <= maxht)<br>
> >> >> zz=1<br>
> >> >> while (height.zz/1000 <= ht)<br>
> >> >> zz=zz+1<br>
> >> >> endwhile<br>
> >> >> zzm=zz-1<br>
> >> >> PBelow=pp.zzm<br>
> >> >> PAbove=pp.zz<br>
> >> >> HBelow=height.zzm<br>
> >> >> HAbove=height.zz<br>
> >> >> DZ=HAbove-HBelow<br>
> >> >> DP=PAbove-PBelow<br>
> >> >> Del=ht*1000-HBelow<br>
> >> >> Est=PBelow+Del*DP/DZ<br>
> >> >> If (Est >= _pmin & Est <= _pmax)<br>
> >> >> "q w2xy 1 " Est<br>
> >> >> yloc=subwrd(result,6)<br>
> >> >> "draw line " lxloc " " yloc " " rxloc " " yloc<br>
> >> >> "draw string 0.22 "yloc-0.05" "ht<br>
> >> >> Endif<br>
> >> >> ht=ht+1<br>
> >> >> endwhile<br>
> >> >> "set strsiz 0.10"<br>
> >> >> "set string 1"<br>
> >> >> If (LblAxes = 1)<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> "draw string 0.25 10.85 km"<br>
> >> >> "draw string 0.25 10.75 "htlb<br>
> >> >> "draw string 0.25 10.65 OBS"<br>
> >> >> Else<br>
> >> >> "draw string 0.25 8.35 km"<br>
> >> >> "draw string 0.25 8.25 "htlb<br>
> >> >> "draw string 0.25 8.15 OBS"<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >><br>
> >> >><br>
> >> >> *---------------------------------------------------<br>
> >> >> * Draw height levels (height above MSL using Std Atm)<br>
> >> >> *---------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawZSTD = 1)<br>
> >> >> "set strsiz 0.10"<br>
> >> >> minht=30.735*(1-pow(_pmax/1013.26,0.287))<br>
> >> >> minht=int(minht+0.5)<br>
> >> >> maxht=30.735*(1-pow(_pmin/1013.26,0.287))<br>
> >> >> maxht=int(maxht)<br>
> >> >> "set gxout stat"<br>
> >> >> zcount=minht<br>
> >> >> while (zcount <= maxht)<br>
> >> >> plev=1013.26*pow((1-zcount/30.735),3.4843)<br>
> >> >> "q w2xy 0 "plev<br>
> >> >> yloc=subwrd(result,6)<br>
> >> >> "draw string 0 "yloc-0.05" "zcount<br>
> >> >> zcount=zcount+1<br>
> >> >> endwhile<br>
> >> >> "set strsiz 0.10"<br>
> >> >> If (LblAxes = 1)<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> "draw string 0 10.85 km"<br>
> >> >> "draw string 0 10.75 ASL"<br>
> >> >> "draw string 0 10.65 STD"<br>
> >> >> Else<br>
> >> >> "draw string 0 8.35 km"<br>
> >> >> "draw string 0 8.25 ASL"<br>
> >> >> "draw string 0 8.15 STD"<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >><br>
> >> >><br>
> >> >> *-----------------------<br>
> >> >> * Plot temperature lines<br>
> >> >> *-----------------------<br>
> >> >><br>
> >> >> If (DrawTemp = 1)<br>
> >> >> "set strsiz 0.1"<br>
> >> >> "set z "_zmin " " _zmax<br>
> >> >> "set line "TempCol " " TempLine " "TempThk<br>
> >> >> "set string 1 c 3 0"<br>
> >> >> "set gxout stat"<br>
> >> >> maxtline=GetTemp(100,_pmax)<br>
> >> >> mintline=GetTemp(0,_pmin)<br>
> >> >><br>
> >> >> maxtline=tempint*int(maxtline/tempint)<br>
> >> >> mintline=tempint*int(mintline/tempint)<br>
> >> >><br>
> >> >> tloop=mintline<br>
> >> >> While (tloop <= maxtline)<br>
> >> >> Botxtemp=GetXLoc(tloop,_pmax)<br>
> >> >> "q w2xy "Botxtemp " " _pmax<br>
> >> >> Botxloc=subwrd(result,3)<br>
> >> >> Botyloc=byloc<br>
> >> >> Topxtemp=GetXLoc(tloop,_pmin)<br>
> >> >> "q w2xy "Topxtemp " " _pmin<br>
> >> >> Topxloc=subwrd(result,3)<br>
> >> >> Topyloc=tyloc<br>
> >> >> If (Botxtemp <= 100 | Topxtemp <= 100)<br>
> >> >> If (Topxtemp > 100)<br>
> >> >> Slope=(Topyloc-Botyloc)/(Topxtemp-Botxtemp)<br>
> >> >> b=Topyloc-Slope*Topxtemp<br>
> >> >> Topyloc=Slope*100+b<br>
> >> >> Topxloc=rxloc<br>
> >> >> Endif<br>
> >> >> If (Botxtemp < 0)<br>
> >> >> Slope=(Topyloc-Botyloc)/(Topxtemp-Botxtemp)<br>
> >> >> b=Botyloc-Slope*Botxtemp<br>
> >> >> Botyloc=b<br>
> >> >> Botxloc=lxloc<br>
> >> >> Else<br>
> >> >> "set strsiz 0.15"<br>
> >> >> "draw string " Botxloc-0.05 " " Botyloc-0.15 " " tloop<br>
> >> >> Endif<br>
> >> >> "draw line "Botxloc " " Botyloc " " Topxloc " " Topyloc<br>
> >> >> Endif<br>
> >> >> tloop=tloop+tempint<br>
> >> >> EndWhile<br>
> >> >> If (LblAxes = 1)<br>
> >> >> "set strsiz 0.15"<br>
> >> >> "set string 1 c"<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> "draw string 4.0 0.35 Temperatura (`3.`0C)"<br>
> >> >> "draw string 7.7 0.35 Viento m/s "<br>
> >> >> Else<br>
> >> >> "draw string 3.5 0.15 Temperatura (`3.`0C)"<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >><br>
> >> >><br>
> >> >> *------------------<br>
> >> >> * Plot dry adiabats<br>
> >> >> *------------------<br>
> >> >><br>
> >> >> If (DrawThet = 1)<br>
> >> >> temp=GetTemp(100,_pmin)<br>
> >> >> maxtheta=GetThet2(temp,-100,_pmin)<br>
> >> >> maxtheta=thetaint*int(maxtheta/thetaint)<br>
> >> >> temp=GetTemp(0,_pmax)<br>
> >> >> mintheta=GetThet2(temp,-100,_pmax)<br>
> >> >> mintheta=thetaint*int(mintheta/thetaint)<br>
> >> >><br>
> >> >> "set lon 0 100"<br>
> >> >> "set y 1"<br>
> >> >> "set z 1"<br>
> >> >> tloop=mintheta<br>
> >> >> "set line "ThetCol" "ThetLine " "ThetThk<br>
> >> >> While (tloop <= maxtheta)<br>
> >> >> PTemp=LiftDry(tloop,1000,_pmin,1,_pmin,_pmax)<br>
> >> >> tloop=tloop+thetaint<br>
> >> >> Endwhile<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *------------------------<br>
> >> >> * Plot mixing ratio lines<br>
> >> >> *------------------------<br>
> >> >><br>
> >> >> If (DrawMix = 1)<br>
> >> >> If (MixStop < _pmin)<br>
> >> >> MixStop = _pmin<br>
> >> >> Endif<br>
> >> >> "set string 1 l"<br>
> >> >> "set z "_zmin " " _zmax<br>
> >> >> "set cint 1"<br>
> >> >> "set line "MixCol" " MixLine " "MixThk<br>
> >> >> cont = 1<br>
> >> >> mloop=subwrd(wsclevs,1)<br>
> >> >> count = 1<br>
> >> >> While (cont = 1)<br>
> >> >> BotCoef=log(mloop*_pmax/3801.66)<br>
> >> >> BotTval=-245.5*BotCoef/(BotCoef-17.67)<br>
> >> >> Botxtemp=GetXLoc(BotTval,_pmax)<br>
> >> >> "q w2xy "Botxtemp " " _pmax<br>
> >> >> Botxloc=subwrd(result,3)<br>
> >> >> Botyloc=byloc<br>
> >> >> TopCoef=log(mloop*MixStop/3801.66)<br>
> >> >> TopTval=-245.5*TopCoef/(TopCoef-17.67)<br>
> >> >> Topxtemp=GetXLoc(TopTval,MixStop)<br>
> >> >> "q w2xy "Topxtemp " " MixStop<br>
> >> >> Topxloc=subwrd(result,3)<br>
> >> >> Topyloc=subwrd(result,6)<br>
> >> >> "set string "MixCol" l 3"<br>
> >> >> "set strsiz 0.09"<br>
> >> >> If (Botxtemp <= 100 | Topxtemp <= 100)<br>
> >> >> If (Topxtemp > 100)<br>
> >> >> Slope=(Topyloc-Botyloc)/(Topxtemp-Botxtemp)<br>
> >> >> b=Topyloc-Slope*Topxtemp<br>
> >> >> Topyloc=Slope*100+b<br>
> >> >> Topxloc=rxloc<br>
> >> >> "draw string " Topxloc+0.05 " " Topyloc " " mloop<br>
> >> >> Else<br>
> >> >> "draw string " Topxloc " " Topyloc+0.1 " " mloop<br>
> >> >> Endif<br>
> >> >> If (Botxtemp < 0)<br>
> >> >> Slope=(Topyloc-Botyloc)/(Topxtemp-Botxtemp)<br>
> >> >> b=Botyloc-Slope*Botxtemp<br>
> >> >> Botyloc=b<br>
> >> >> Botxloc=lxloc<br>
> >> >> Endif<br>
> >> >> "draw line "Botxloc " " Botyloc " " Topxloc " " Topyloc<br>
> >> >> Endif<br>
> >> >> count=count+1<br>
> >> >> mloop=subwrd(wsclevs,count)<br>
> >> >> If (mloop = "" | count > 50)<br>
> >> >> cont = 0<br>
> >> >> Endif<br>
> >> >> EndWhile<br>
> >> >> If (LblAxes = 1)<br>
> >> >> "set strsiz 0.15"<br>
> >> >> "set string 1 c 3 90"<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> * "draw string 7.40 4.75 Relacion de Mezcla (g/kg)"<br>
> >> >> Else<br>
> >> >> * "draw string 6.90 4.25 Mixing Ratio (g/kg)"<br>
> >> >> Endif<br>
> >> >> "set string 1 c 3 0"<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *-----------------------------<br>
> >> >> * Plot moist (pseudo) adiabats<br>
> >> >> *-----------------------------<br>
> >> >><br>
> >> >> If (DrawThtw = 1)<br>
> >> >> "set lon 0 100"<br>
> >> >> "set y 1"<br>
> >> >> "set z 1"<br>
> >> >> "set gxout stat"<br>
> >> >> tloop=80<br>
> >> >> "set line "ThtwCol" "ThtwLine " "ThtwThk<br>
> >> >> While (tloop > -80)<br>
> >> >> PTemp=LiftWet(tloop,1000,ThtwStop,1,_pmin,_pmax)<br>
> >> >> tloop=tloop-thetwint<br>
> >> >> Endwhile<br>
> >> >> Endif<br>
> >> >><br>
> >> >><br>
> >> >> *-----------------------------------------------------<br>
> >> >> * Plot transformed user-specified temperature sounding<br>
> >> >> *-----------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawTSnd = 1)<br>
> >> >> say "Drawing temperature sounding."<br>
> >> >> "set gxout line"<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set z "_zmin" "_zmax<br>
> >> >> "set ccolor "TSndCol<br>
> >> >> "set cstyle "TSndLine<br>
> >> >> "set cmark "TSndMrk<br>
> >> >> "set digsiz "MrkSize<br>
> >> >> "set cthick "TSndThk<br>
> >> >> "set missconn on"<br>
> >> >> "d tempx"<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *---------------------------------------------------<br>
> >> >> * Plot transformed user-specified dewpoint sounding<br>
> >> >> *---------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawDSnd = 1)<br>
> >> >> say "Drawing dewpoint sounding."<br>
> >> >> "set gxout line"<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set z "_zmin" "_zmax<br>
> >> >> "set cmark "DSndMrk<br>
> >> >> "set digsiz "MrkSize<br>
> >> >> "set ccolor "DSndCol<br>
> >> >> "set cstyle "DSndLine<br>
> >> >> "set cthick "DSndThk<br>
> >> >> "set missconn on"<br>
> >> >> "d dewpx"<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *----------------------------------------<br>
> >> >> * Determine lowest level of reported data<br>
> >> >> *----------------------------------------<br>
> >> >><br>
> >> >> If (DrawTSnd = 1)<br>
> >> >> field=sndtemp<br>
> >> >> Else<br>
> >> >> field=sndspd<br>
> >> >> Endif<br>
> >> >><br>
> >> >> "set gxout stat"<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set t "_tval<br>
> >> >> "set lev " _pmax " " _pmin<br>
> >> >> "d maskout(lev,"field"+300)"<br>
> >> >> rec=sublin(result,1)<br>
> >> >> check=substr(rec,1,6)<br>
> >> >> If (check = "Notice")<br>
> >> >> rec=sublin(result,9)<br>
> >> >> Else<br>
> >> >> rec=sublin(result,8)<br>
> >> >> Endif<br>
> >> >> SfcPlev=subwrd(rec,5)<br>
> >> >><br>
> >> >> If (DrawTSnd = 1 & DrawDSnd = 1)<br>
> >> >> "set lev "SfcPlev<br>
> >> >> "d "sndtemp<br>
> >> >> rec=sublin(result,8)<br>
> >> >> Sfctemp=subwrd(rec,4)<br>
> >> >> "d "snddewp<br>
> >> >> rec=sublin(result,8)<br>
> >> >> Sfcdewp=subwrd(rec,4)<br>
> >> >> SfcThee=Thetae(Sfctemp,Sfcdewp,SfcPlev)<br>
> >> >><br>
> >> >> *------------------------------------------<br>
> >> >> * Calculate temperature and pressure of LCL<br>
> >> >> *------------------------------------------<br>
> >> >><br>
> >> >> TLcl=Templcl(Sfctemp,Sfcdewp)<br>
> >> >> PLcl=Preslcl(Sfctemp,Sfcdewp,SfcPlev)<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *----------------------------------------------------------<br>
> >> >> * Plot parcel path from surface to LCL and up moist adiabat<br>
> >> >> *----------------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawPrcl = 1)<br>
> >> >> say "Drawing parcel path from surface upward."<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> xloc=7.15<br>
> >> >> Else<br>
> >> >> xloc=6.65<br>
> >> >> Endif<br>
> >> >> "q w2xy 1 "PLcl<br>
> >> >> rec=sublin(result,1)<br>
> >> >> yloc=subwrd(rec,6)<br>
> >> >> "set strsiz 0.1"<br>
> >> >> If (PLcl < _pmax)<br>
> >> >> "set string 1 l"<br>
> >> >> "draw string "xloc" "yloc" LCL"<br>
> >> >> "set line 1 1 1"<br>
> >> >> "draw line "xloc-0.15" "yloc" "xloc-0.05" "yloc<br>
> >> >> Endif<br>
> >> >> "set lon 0 100"<br>
> >> >> "set gxout stat"<br>
> >> >> "set line "PrclCol" "PrclLine " " PrclThk<br>
> >> >> PTemp=LiftDry(Sfctemp,SfcPlev,PLcl,1,_pmin,_pmax)<br>
> >> >> Ptemp=LiftWet(TLcl,PLcl,_pmin,1,_pmin,_pmax)<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *-------------------------------------------------------<br>
> >> >> * Determine level within lowest 250mb having highest<br>
> >> >> * theta-e value<br>
> >> >> *-------------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawTSnd = 1 & DrawDSnd = 1)<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set t "_tval<br>
> >> >> zz=1<br>
> >> >> MaxThee=-999<br>
> >> >> "set gxout stat"<br>
> >> >> while (zz <= _zmax & pp > _pmax-250)<br>
> >> >> "set z "zz<br>
> >> >> pp=subwrd(result,4)<br>
> >> >> "d "sndtemp<br>
> >> >> rec=sublin(result,8)<br>
> >> >> tt=subwrd(rec,4)<br>
> >> >> "d "snddewp<br>
> >> >> rec=sublin(result,8)<br>
> >> >> dd=subwrd(rec,4)<br>
> >> >> If (abs(tt) < 130 & abs(dd) < 130)<br>
> >> >> Thee=Thetae(tt,dd,pp)<br>
> >> >> If (Thee > MaxThee)<br>
> >> >> MaxThee=Thee<br>
> >> >> TMaxThee=tt<br>
> >> >> DMaxThee=dd<br>
> >> >> PMaxThee=pp<br>
> >> >> Endif<br>
> >> >> endif<br>
> >> >> zz=zz+1<br>
> >> >> Endwhile<br>
> >> >> If (PMaxThee = SfcPlev-250)<br>
> >> >> PMaxThee = SfcPlev<br>
> >> >> Endif<br>
> >> >> *------------------------------------------------------<br>
> >> >> * Calculate temperature and pressure of LCL from highest<br>
> >> >> * theta-e level<br>
> >> >> *------------------------------------------------------<br>
> >> >> If (SfcPlev != PMaxThee)<br>
> >> >> TLclMax=Templcl(TMaxThee,DMaxThee)<br>
> >> >> PLclMax=Preslcl(TMaxThee,DMaxThee,PMaxThee)<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *----------------------------------------------------------<br>
> >> >> * Plot parcel path from highest theta-e level to LCL and up<br>
> >> >> * moist adiabat<br>
> >> >> *----------------------------------------------------------<br>
> >> >><br>
> >> >> If (DrawPMax = 1 & SfcPlev != PMaxThee)<br>
> >> >> say "Drawing parcel path from most unstable level upward."<br>
> >> >> If (PageType = "Portrait")<br>
> >> >> xloc=7.15<br>
> >> >> Else<br>
> >> >> xloc=6.65<br>
> >> >> Endif<br>
> >> >> "q w2xy 1 "PLclMax<br>
> >> >> rec=sublin(result,1)<br>
> >> >> yloc=subwrd(rec,6)<br>
> >> >> "set strsiz 0.1"<br>
> >> >> If (PLclMax < _pmax)<br>
> >> >> "set string 1 l"<br>
> >> >> "draw string "xloc" "yloc" LCL"<br>
> >> >> "set line 1 1 1"<br>
> >> >> "draw line "xloc-0.15" "yloc" "xloc-0.05" "yloc<br>
> >> >> Endif<br>
> >> >> "set lon 0 100"<br>
> >> >> "set gxout stat"<br>
> >> >> "set line "PrclCol" "PrclLine " " PrclThk<br>
> >> >> PTemp=LiftDry(TMaxThee,PMaxThee,PLclMax,1,_pmin,_pmax)<br>
> >> >> Ptemp=LiftWet(TLclMax,PLclMax,_pmin,1,_pmin,_pmax)<br>
> >> >> Endif<br>
> >> >><br>
> >> >> *--------------------------------<br>
> >> >> * Draw thermodynamic indices<br>
> >> >> *--------------------------------<br>
> >> >><br>
> >> >> If (DrawIndx = 1)<br>
> >> >> "set string 1 l"<br>
> >> >> "set strsiz 0.10"<br>
> >> >> "set x "_xval<br>
> >> >> "set y "_yval<br>
> >> >> "set t "_tval<br>
> >> >> say "Calculating precipitable water."<br>
> >> >> pw=precipw(sndtemp,snddewp,_pmax,_pmin)<br>
> >> >> say "Calculating thermodynamic indices."<br>
> >> >> Temp850=interp(sndtemp,850)<br>
> >> >> Temp700=interp(sndtemp,700)<br>
> >> >> Temp500=interp(sndtemp,500)<br>
> >> >> Dewp850=interp(snddewp,850)<br>
> >> >> Dewp700=interp(snddewp,700)<br>
> >> >> Dewp500=interp(snddewp,500)<br>
> >> >> If (Temp850>-900 & Dewp850>-900 & Dewp700>-900 & Temp700>-900 &<br>
> >> >> Temp500>-900)<br>
> >> >> K=Temp850+Dewp850+Dewp700-Temp700-Temp500<br>
> >> >> Else<br>
> >> >> K=-999<br>
> >> >> Endif<br>
> >> >> If (Temp850 > -900 & Dewp850 > -900 & Temp500 > -900)<br>
> >> >> tt=Temp850+Dewp850-2*Temp500<br>
> >> >> Else<br>
> >> >> tt=-999<br>
> >> >> Endif<br>
> >> >> Temp500V=virtual2(Temp500+273.15,Dewp500+273.15,500)-273.15<br>
> >> >> PclTemp=LiftWet(TLcl,PLcl,500,0)<br>
> >> >> PclTempV=virtual2(PclTemp+273.15,PclTemp+273.15,500)-273.15<br>
> >> >> SLI=Temp500V-PclTempV<br>
> >> >> rec=CAPE(TLcl,PLcl,200,sndtemp,snddewp)<br>
> >> >> Pos=subwrd(rec,1)<br>
> >> >> CIN=subwrd(rec,2)<br>
> >> >><br>
> >> >> If (SfcPlev != PMaxThee)<br>
> >> >> PclTemp=LiftWet(TLclMax,PLclMax,500,0)<br>
> >> >> PclTempV=virtual2(PclTemp+273.15,PclTemp+273.15,500)-273.15<br>
> >> >> LIMax=Temp500V-PclTempV<br>
> >> >> rec=CAPE(TLclMax,PLclMax,100,sndtemp,snddewp)<br>
> >> >> PosMax=subwrd(rec,1)<br>
> >> >> CINMax=subwrd(rec,2)<br>
> >> >> Else<br>
> >> >> LIMax=SLI<br>
> >> >> PosMax=Pos<br>
> >> >> CINMax=CIN<br>
> >> >> MaxThee=SfcThee<br>
> >> >> Endif<br>
> >> >><br>
> >> >> If (PageType = "Portrait")<br>
> >> >> If (Text1XC = -1)<br>
> >> >> Text1XC=rxloc-0.75<br>
> >> >> Endif<br>
> >> >> If (Text1YC = -1)<br>
> >> >> Text1YC=tyloc-2.25<br>
> >> >> Endif<br>
> >> >> If (Text2XC = -1)<br>
> >> >> Text2XC=rxloc-0.75<br>
> >> >> Endif<br>
> >> >> If (Text2YC = -1)<br>
> >> >> Text2YC=tyloc-3.25<br>
> >> >> Endif<br>
> >> >> If (Text3XC = -1)<br>
> >> >> Text3XC=rxloc-0.75<br>
> >> >> Endif<br>
> >> >> If (Text3YC = -1)<br>
> >> >> Text3YC=tyloc-4.40<br>
> >> >> Endif<br>
> >> >> Else<br>
> >> >> If (Text1XC = -1)<br>
> >> >> Text1XC=rxloc+2.50<br>
> >> >> Endif<br>
> >> >> If (Text1YC = -1)<br>
> >> >> Text1YC=tyloc-3.00<br>
> >> >> Endif<br>
> >> >> If (Text2XC = -1)<br>
> >> >> Text2XC=rxloc+2.50<br>
> >> >> Endif<br>
> >> >> If (Text2YC = -1)<br>
> >> >> Text2YC=tyloc-4.00<br>
> >> >> Endif<br>
> >> >> If (Text3XC = -1)<br>
> >> >> Text3XC=rxloc+2.50<br>
> >> >> Endif<br>
> >> >> If (Text3YC = -1)<br>
> >> >> Text3YC=tyloc-5.10<br>
> >> >> Endif<br>
> >> >> Endif<br>
> >> >> "set string 1 l 3"<br>
> >> >> "set line 0 1 3"<br>
> >> >> "draw recf "Text1XC-0.75 " " Text1YC-0.40 " " Text1XC+0.75 " "<br>
> >> >> Text1YC+0.25<br>
> >> >> "set line 1 1 3"<br>
> >> >> "draw rec "Text1XC-0.75 " " Text1YC-0.40 " " Text1XC+0.75 " "<br>
> >> >> Text1YC+0.25<br>
> >> >> "draw string "Text1XC-0.70 " " Text1YC+0.10" K"<br>
> >> >> "draw string "Text1XC+0.25 " " Text1YC+0.10" " int(K)<br>
> >> >> "draw string "Text1X</div></div></blockquote></div><br>_______________________________________________<br>
gradsusr mailing list<br>
<a href="mailto:gradsusr@gradsusr.org">gradsusr@gradsusr.org</a><br>
<a href="http://gradsusr.org/mailman/listinfo/gradsusr" target="_blank">http://gradsusr.org/mailman/listinfo/gradsusr</a><br>
<br></blockquote></div><br></div>
<pre>***************************************************
The information contained in this e-mail message
is intended only for the use of the recipient(s)
named above and may contain information that is
privileged, confidential, and/or proprietary.
If you are not the intended recipient, you may not
review, copy or distribute this message. If you have
received this communication in error, please notify
the sender immediately by e-mail, and delete the original message.
***************************************************