[gradsusr] If Statements for Gridded Model Data Open GrADS
Baker, Matt (Quebec - Atlantic)
matt.baker at amecfw.com
Thu Jun 23 14:49:10 EDT 2016
Stephen,
Here’s the code in its entirety:
'set grads off'
'set grid off'
'set gxout shaded'
'set clevs 1,2,3,4,5,6,7,8,9'
'set ccols 1,9,14,4,11,5,13,3,10,7'
'set csmooth on'
'define NAMHail = 0'
'NAMcape = CAPEsfc.'modelNumberNAM
'define NAMHail = if(NAMcape,>,1500,if(NAMcape,<,2200,1,NAMHail),NAMHail)'
'define NAMHail = if(NAMcape,>,2199,if(NAMcape,<,3100,3,NAMHail),NAMHail)'
'define NAMHail = if(NAMcape,>,3099,4,NAMHail)'
'd NAMHail'
I’m getting grey and it’s a color that’s not even defined in the color pallet. When I just display NAMHail as 0 with none of the if statements being used, nothing is displayed.
You’re right, NAMcape and SBCAPE are the same. I’m essentially trying to see how a hail parameter would work given some ingredients (Surface Based CAPE being one of those) and plotting it in GrADS.
Cheers,
Matt
From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Stephen McMillan
Sent: June-23-16 2:21 PM
To: GrADS Users Forum <gradsusr at gradsusr.org>
Subject: Re: [gradsusr] If Statements for Gridded Model Data Open GrADS
Matt,
It also occurred to me that the reason you're not seeing a display for values of 1 may be how you have your color contours set up. For example, if you are using 'set gxout shaded' or 'set gxout grfill' be sure to include a color for a value between 0 and 1 since a value of 1 would be included in that range. A better option could be 'set gxout fgrid' along with 'set fgvals...'
Stephen Mc
On Thu, Jun 23, 2016 at 11:51 AM, Baker, Matt (Quebec - Atlantic) <matt.baker at amecfw.com<mailto:matt.baker at amecfw.com>> wrote:
Hi Stephen,
I’m attempting your route with the if statements; however, I want to make sure I’m executing them correctly.
Here’s the new code with the Ifs.
'define NAMHail = if(NAMcape,>,1500,if(NAMcape,<,2200,NAMHail+1,NAMHail),NAMHail)'
'define NAMHail = if(NAMcape,>,2199,if(NAMcape,<,3100,NAMHail+3,NAMHail),NAMHail)'
'define NAMHail = if(NAMcape,>,3099,NAMHail+4,NAMHail)'
That code currently only displays values of 1 when the SBCAPE is greater than 2200. I’m wondering why the expression that’s bolded doesn’t return that value to NAMHail even though its being defined.
Cheers,
Matt
From: gradsusr-bounces at gradsusr.org<mailto:gradsusr-bounces at gradsusr.org> [mailto:gradsusr-bounces at gradsusr.org<mailto:gradsusr-bounces at gradsusr.org>] On Behalf Of Stephen McMillan
Sent: June-22-16 2:09 PM
To: GrADS Users Forum <gradsusr at gradsusr.org<mailto:gradsusr at gradsusr.org>>
Subject: Re: [gradsusr] If Statements for Gridded Model Data Open GrADS
Matt,
The "if" construct you are using will not work on a gridded field, and it appears that's what you are trying to do. The extension "if" function was designed to work on such fields.
Here's a partial example using the first set of conditions you provided:
'define NAMHail=if(NAMcape,>,1500,if(NAMcape,<,2200,NAMHail+1,NAMHail),NAMHail)'
That's, of course, assuming you have defined a field called "NAMHail" as zero prior to executing the "if" function. Alternatively, you could have 0 or -u (for undefined) as your false expression, without first defining NAMHail. After that, you could execute the "if" again by adding an additional set of conditions, until you have applied all conditions. Another option is to nest several conditions, but it gets a little complicated that way.
Stephen McMillan
On Wed, Jun 22, 2016 at 12:11 PM, Baker, Matt (Quebec - Atlantic) <matt.baker at amecfw.com<mailto:matt.baker at amecfw.com>> wrote:
Thanks Bernd and Stephen,
Essentially if the CAPE, LI, and 500 mb relative humidity are within a certain range, I want to add to NAMHail variable (NAMHail = NAMHail + 1) and then display the variable with contour lines.
Stephen, in my code there are already if statements for this. Is there something wrong with my syntax and could that be the reason GrADS isn’t executing in the if statement?
As an example, is this statement written correctly?
if (NAMcape > 1500 & NAMcape < 2200)
'NAMHail = NAMHail + 1'
endif
Again, NAMHail is defined by: ‘NAMHail = 0’ before the if the statements.
Thanks for the help!
Matt
From: gradsusr-bounces at gradsusr.org<mailto:gradsusr-bounces at gradsusr.org> [mailto:gradsusr-bounces at gradsusr.org<mailto:gradsusr-bounces at gradsusr.org>] On Behalf Of Stephen McMillan
Sent: June-22-16 12:39 PM
To: GrADS Users Forum <gradsusr at gradsusr.org<mailto:gradsusr at gradsusr.org>>
Subject: Re: [gradsusr] If Statements for Gridded Model Data Open GrADS
Hi Matt,
In addition to Bernd's suggestion, also check out the "if" function, which should have come with your opengrads package as part of the following extension function set:
http://opengrads.org/doc/udxt/libbjt/
The "if" function syntax:
if(EXPR1,OP,EXPR2,TRUE_EXPR,FALSE_EXPR)
This function compares EXPR1 and EXPR2, where 5 arguments are expected. if their relation is true, TRUE_EXP is returned, otherwise expression FALSE_EXPR is returned.
OP
One of the following: ==, =, >, <, >=, <=, !=
EXPR2, TRUE_EXPR, FALSE_EXPR
These can be a expression, constant or -u.
I have found this function to be very useful and much easier to handle than using maskout and const, although there are probably cases where the latter is more appropriate or advisable.
Stephen McMillan
On Wed, Jun 22, 2016 at 9:24 AM, Baker, Matt (Quebec - Atlantic) <matt.baker at amecfw.com<mailto:matt.baker at amecfw.com>> wrote:
Hi all,
I have a question regarding Open GrADS.
I’m trying to use if statements for scalar model data (eg. GFS and NAM) over a grid and I’m wondering if it’s possible to do this. As an example, I’m using if statements for these parameters: surface based CAPE, LI, and 500 mb relative humidity to create an index to plot on a map. So far GrADS isn’t showing that this is working, however, I can plot the model data individually so I don’t think it’s a case of missing data.
Here’s some of the code for the NAM model. Note that I define the variable NAMHail to equal 0 at the start of the function.
if (modelNumberNAM>0)
set_maps(_map,_hasNegativeNAM)
'set grads off'
'set grid off'
'set gxout contour'
'set ccolor 0'
'set clopts -1 1 0.15'
'set cint 1'
'set cthick 6'
'set clab on'
'set csmooth on'
'NAMcape = CAPEsfc.'modelNumberNAM
if (NAMcape > 1500 & NAMcape < 2200)
'NAMHail = NAMHail + 1'
endif
if (NAMcape > 2199 & NAMcape < 3100)
'NAMHail = NAMHail + 2'
endif
if (NAMcape > 3099)
'NAMHail = NAMHail + 3'
endif
'set lev 500'
'NAMrh500=RHprs.'modelNumberNAM
if (NAMrh500 < 35)
'NAMHail = NAMHail + 3'
endif
if (NAMrh500 > 35 & NAMrh500 < 44)
'NAMHail = NAMHail + 1'
endif
endif
'set gxout contour'
'set ccolor 0'
'set clopts -1 1 0.15'
'set cint 200'
'set cthick 6'
'set clab on'
'set csmooth on'
'd NAMcape'
Thanks!
Matt Baker
Meteorologist, Met-Ocean Services, Amec Foster Wheeler Environment & Infrastructure
133 Crosbie Road, PO Box 13216, St. John’s, NL A1B 4A5, Canada
matt.baker at amecfw.com<mailto:matt.baker at amecfw.com> amecfw.com<http://amecfw.com>
ISO 9001:2008 Quality Management System (St. John's)
[cid:image001.jpg at 01D1CC84.8BC9E9B0]
This message is the property of Amec Foster Wheeler plc and/or its subsidiaries and/or affiliates and is intended only for the named recipient(s). Its contents (including any attachments) may be confidential, legally privileged or otherwise protected from disclosure by law. Unauthorised use, copying, distribution or disclosure of any of it may be unlawful and is strictly prohibited. We assume no responsibility to persons other than the intended named recipient(s) and do not accept liability for any errors or omissions which are a result of email transmission. If you have received this message in error, please notify us immediately by reply email to the sender and confirm that the original message and any attachments and copies have been destroyed and deleted from your system. This disclaimer applies to any and all messages originating from us and set out above. If you do not wish to receive future unsolicited commercial electronic messages from us, please forward this email to: unsubscribe at amecfw.com<mailto:unsubscribe at amecfw.com> and include “Unsubscribe” in the subject line. If applicable, you will continue to receive invoices, project communications and similar factual, non-commercial electronic communications.
Please click http://amecfw.com/email-disclaimer for notices and company information in relation to emails originating in the UK, Italy or France.
_______________________________________________
gradsusr mailing list
gradsusr at gradsusr.org<mailto:gradsusr at gradsusr.org>
http://gradsusr.org/mailman/listinfo/gradsusr
_______________________________________________
gradsusr mailing list
gradsusr at gradsusr.org<mailto:gradsusr at gradsusr.org>
http://gradsusr.org/mailman/listinfo/gradsusr
_______________________________________________
gradsusr mailing list
gradsusr at gradsusr.org<mailto:gradsusr at gradsusr.org>
http://gradsusr.org/mailman/listinfo/gradsusr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20160623/d2dcd4e0/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5711 bytes
Desc: image001.jpg
Url : http://gradsusr.org/pipermail/gradsusr/attachments/20160623/d2dcd4e0/attachment-0001.jpg
More information about the gradsusr
mailing list