[gradsusr] (no subject)
Gargi Akhoury
gargiakhoury at bitmesra.ac.in
Mon Sep 15 11:10:27 EDT 2014
Data is very large....takes time to upload.....Is there any other method?
Thanks & regards
On Mon, Sep 15, 2014 at 8:18 PM, Gargi Akhoury <gargiakhoury at bitmesra.ac.in>
wrote:
> Yeah m getting the same result .....
>
> thanks & regards
>
> On Mon, Sep 15, 2014 at 8:06 PM, Davide Sacchetti <
> davide.sacchetti at arpal.gov.it> wrote:
>
>> the message you get is not perfectly clear to me ... but from
>> 'Contouring: 273 to 297 interval 3' it seems you got your result, at the
>> end
>> the same result should be achieved by:
>> 'display (temp(z=1)+temp(z=2))/2'
>>
>> If you don't get your result, you can put your data on the web: I could
>> download your data and try to understand better ...
>>
>> bye bye
>> Davide
>>
>>
>> On Mon, 2014-09-15 at 19:44 +0530, Gargi Akhoury wrote:
>> > m srry Davide...m not getting ....my result is:
>> >
>> >
>> > ga-> set z 1
>> > LEV set to 1000 1000
>> > ga-> d ave(temp,lev=1000,lev=925)
>> > Averaging. Averaging. dim = 2, start = 1, end = 2
>> > Data Request Warning: Request is completely outside file limits
>> > Entire grid contents are set to missing data
>> > Grid limits of file: X = 1 144 Y = 1 73 Z = 1 17 T = 1 780 E
>> > = 1 1
>> > Grid limits of request: X = 1 2 Y = 1 38 Z = 2 2 T = 1 1 E = 1
>> > 1
>> > Warning issued for variable = temp
>> > Contouring: 273 to 297 interval 3
>> >
>> >
>> >
>> >
>> > ve to take out the average of both the levels....!!
>> >
>> >
>> > Thanks & Regards
>> >
>> > On Mon, Sep 15, 2014 at 7:29 PM, Davide Sacchetti
>> > <davide.sacchetti at arpal.gov.it> wrote:
>> > on your system z is varying: use
>> > set z 1
>> > bye bye
>> > Davide
>> >
>> > On Mon, 2014-09-15 at 19:06 +0530, Gargi Akhoury wrote:
>> > > Sure Davide.....
>> > > The result is
>> > >
>> > >
>> > > ga-> query dims
>> > > Default file number is: 1
>> > > X is varying Lon = 0 to 2.5 X = 1 to 2
>> > > Y is varying Lat = -90 to 2.5 Y = 1 to 38
>> > > Z is varying Lev = 1000 to 925 Z = 1 to 2
>> > > T is fixed Time = 00Z01JAN1949 T = 1
>> > > E is fixed Ens = 1 E = 1
>> > >
>> > >
>> > >
>> > > On Mon, Sep 15, 2014 at 6:26 PM, Davide Sacchetti
>> > > <davide.sacchetti at arpal.gov.it> wrote:
>> > > ok: fatto!
>> > >
>> > > On Mon, 2014-09-15 at 14:35 +0200, Giovanni Besio
>> > wrote:
>> > > > Ciao caro,
>> > > > come stai? Tutto bene?
>> > > > Senti, ti dovrei chiedere un favore: potresti
>> > sostituire il
>> > > nome del
>> > > > dipartimento sulle mappe? Adesso ci chiamiamo
>> > DICCA e non
>> > > più DICAT.
>> > > >
>> > > > Giovanni Besio
>> > > >
>> > > >
>> > > > Il 15/09/2014 13:57, Davide Sacchetti ha scritto:
>> > > > > no it is not ... use this:
>> > > > > set lat and lon varying on your desired area
>> > > > > set z fixed (eg.: set z 1)
>> > > > > d ave(temp,lev=1000,lev=850)
>> > > > >
>> > > > > it should work
>> > > > > bye bye
>> > > > > Davide
>> > > > >
>> > > > > On Mon, 2014-09-15 at 16:07 +0530, Gargi Akhoury
>> > wrote:
>> > > > >> Hello,
>> > > > >> ve one query. To find the average of
>> > levels (e.g
>> > > levels from 1000
>> > > > >> hpa to 850 hpa) (of temp. data)...is these
>> > commands
>> > > correct:
>> > > > >>
>> > > > >>
>> > > > >>
>> > > > >>
>> > > > >> open temp.ctl
>> > > > >>
>> > > > >> set lev 1000 925
>> > > > >>
>> > > > >> set lon 0 2.5
>> > > > >>
>> > > > >> set lat -90 2.5
>> > > > >>
>> > > > >> d aave(temp,x=1,x=144,y=1,y=73)
>> > > > >>
>> > > > >>
>> > > > >> and again to save this new data(i.e averaged
>> > data) what
>> > > shall I do?
>> > > > >>
>> > > > >>
>> > > > >> Thanks & Regards
>> > > > >> _______________________________________________
>> > > > >> gradsusr mailing list
>> > > > >> gradsusr at gradsusr.org
>> > > > >> http://gradsusr.org/mailman/listinfo/gradsusr
>> > > >
>> > > >
>> > >
>> > > --
>> > >
>> > > Davide Sacchetti
>> > > Centro Funzionale Meteo Idrologico di Protezione
>> > Civile della
>> > > Regione Liguria
>> > > ARPAL Unità Tecnica Complessa di livello Regionale
>> > > V.le Brigare Partigiane 2 16121 Genova (I)
>> > > tel: +39 010 6437535 fax: +39 010
>> > 6437520
>> > > mail: davide.sacchetti at arpal.gov.it web:
>> > > www.meteoliguria.it
>> > >
>> > >
>> > > _______________________________________________
>> > > gradsusr mailing list
>> > > gradsusr at gradsusr.org
>> > > http://gradsusr.org/mailman/listinfo/gradsusr
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > gradsusr mailing list
>> > > gradsusr at gradsusr.org
>> > > http://gradsusr.org/mailman/listinfo/gradsusr
>> >
>> > --
>> > Davide Sacchetti
>> > Centro Funzionale Meteo Idrologico di Protezione Civile della
>> > Regione Liguria
>> > ARPAL Unità Tecnica Complessa di livello Regionale
>> > V.le Brigare Partigiane 2 16121 Genova (I)
>> > tel: +39 010 6437535 fax: +39 010 6437520
>> > mail: davide.sacchetti at arpal.gov.it web:
>> > www.meteoliguria.it
>> >
>> >
>> > _______________________________________________
>> > gradsusr mailing list
>> > gradsusr at gradsusr.org
>> > http://gradsusr.org/mailman/listinfo/gradsusr
>> >
>> >
>> >
>> > _______________________________________________
>> > gradsusr mailing list
>> > gradsusr at gradsusr.org
>> > http://gradsusr.org/mailman/listinfo/gradsusr
>>
>> --
>> Davide Sacchetti
>> Centro Funzionale Meteo Idrologico di Protezione Civile della Regione
>> Liguria
>> ARPAL Unità Tecnica Complessa di livello Regionale
>> V.le Brigare Partigiane 2 16121 Genova (I)
>> tel: +39 010 6437535 fax: +39 010 6437520
>> mail: davide.sacchetti at arpal.gov.it web: www.meteoliguria.it
>>
>>
>> _______________________________________________
>> gradsusr mailing list
>> gradsusr at gradsusr.org
>> http://gradsusr.org/mailman/listinfo/gradsusr
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20140915/7e8a9583/attachment-0001.html
More information about the gradsusr
mailing list