[gradsusr] GrADS--links to MERRA data sets
Mike Bosilovich
mike.bosilovich at gmail.com
Fri Nov 15 08:44:40 EST 2013
On Thu, Nov 14, 2013 at 9:29 AM, Jennifer Adams <jma at cola.iges.org> wrote:
>
> On Nov 13, 2013, at 1:21 PM, Mayes, Fred wrote:
>
> GrADS describes a "descriptor data set" required for reading each data
> set. My goal is to use GrADS to read MERRA data and place it in data sets
> that my software can read. After looking at both MERRA and GrADS for a
> bit, I have some questions.
> 1. In looking at the MERRA document, "File Specification for MERRA
> Products," I don't see a reference to such a data set. However, there are
> references to metadata associated with each variable name. Do you know if
> MERRA data sets (e.g., tavg1_2d_slv_Nx) have descriptor data sets, or does
> the user have to make one?
>
> You should be able to open one of those MERRA files without a descriptor
> file, by just using the 'sdfopen' command.
>
>
Fred, After using sdfopen on a single MERRA data file, used "q ctlinfo".
That will return about 90% of what you need to write a typical grads ctl
file. Use the documentation below to edit that info to create a template
that spans all your data files on your system. The ctl file you create
should work on all the data files bu using the "open" command. Just pay
attention to the templating and TDEF in the ctlinfo editing.
Mike
> 2. MERRA refers to data in HDF-EOS format, while GrADS mentions using
> HDF-SDS format. Are these compatible, or do I need to do a conversion?
>
> The HDF-EOS format is an HDF-SDS file with a whole lot of added metadata
> which is not relevant as far as GrADS is concerned. For practical purposes,
> these two are the same.
>
> 3. I looked through the GrADS user manual but didn't see anything
> about simply reading in data and writing it out in some other format (e.g.,
> ASCII). Do you know where I can find this information? Thanks!
>
> The doc page for writing out ASCII is
> http://iges.org/grads/gadoc/ascii.html
> You will need to write a script to do it, so you should also have a look
> at http://iges.org/grads/gadoc/script.html
> --Jennifer
>
>
> Fred M.
>
>
> -----Original Message-----
> From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org]
> On Behalf Of gradsusr-request at gradsusr.org
> Sent: Wednesday, November 13, 2013 9:40 AM
> To: gradsusr at gradsusr.org
> Subject: gradsusr Digest, Vol 45, Issue 24
>
> Send gradsusr mailing list submissions to
> gradsusr at gradsusr.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://gradsusr.org/mailman/listinfo/gradsusr
> or, via email, send a message with subject or body 'help' to
> gradsusr-request at gradsusr.org
>
> You can reach the person managing the list at
> gradsusr-owner at gradsusr.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of gradsusr digest..."
>
>
> Today's Topics:
>
> 1. Re: GrADS tutorial--vertical cross section (Jennifer Adams)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 13 Nov 2013 09:40:27 -0500
> From: Jennifer Adams <jma at cola.iges.org>
> Subject: Re: [gradsusr] GrADS tutorial--vertical cross section
> To: GrADS Users Forum <gradsusr at gradsusr.org>
> Message-ID: <10457BAC-7A9F-4422-A595-DD4E7EAB4264 at cola.iges.org>
> Content-Type: text/plain; charset="us-ascii"
>
>
> On Nov 13, 2013, at 9:01 AM, Mayes, Fred wrote:
>
> I entered, as in the tutorial,
>
> Clear
>
> Set lon -90
>
> Set lat -90 90
>
> Set lev 1000 100
>
> Set t 1
>
>
> After the "Set t 1" command, I get "Time values set: 1987:1:1:0
> 1987:1:1:0".
>
> When I execute the next command in the tutorial, "d t", I get an error
>
> again. That "'t' not a variable or function name". I did a "query
>
> file", and T is not on the data set.
>
> There must a discrepancy between the variable names in the tutorial and
> the descriptor file distributed in the example.tar.Z. I will look into it
> and rectify the error. For now, use the variable names in the 'q file'
> output and override what's in the tutorial. Sorry about that!
>
> But obviously GrADS recognized it when I issued the command "Set t 1".
>
> When you use 'set t' you are changing the dimension environment, telling
> grads which time step or range of time steps to look at in the data file.
> The 't' in this case is the index for the time axis. When you 'display t'
> (or 'd t' in shorthand) you are asking grads to display a data variable
> named t, which is something different from the t in 'set t'.
>
> I think I will modify the example data set and the tutorial and use a
> variable name like 'temp' to avoid this confusion.
> --Jennifer
>
>
> Fred M.
>
>
> -----Original Message-----
>
> From: gradsusr-bounces at gradsusr.org
>
> [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of
>
> gradsusr-request at gradsusr.org
>
> Sent: Wednesday, November 13, 2013 7:58 AM
>
> To: gradsusr at gradsusr.org
>
> Subject: gradsusr Digest, Vol 45, Issue 22
>
>
> Send gradsusr mailing list submissions to
>
> gradsusr at gradsusr.org
>
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
> or, via email, send a message with subject or body 'help' to
>
> gradsusr-request at gradsusr.org
>
>
> You can reach the person managing the list at
>
> gradsusr-owner at gradsusr.org
>
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of gradsusr digest..."
>
>
>
> Today's Topics:
>
>
> 1. need help regarding ploting annual cycle of three model data
>
> (asmat ullah)
>
> 2. need help regarding ploting annual cycle of three model data
>
> (asmat ullah)
>
> 3. Re: GrADS--Failure of display box to open with map (Mayes, Fred)
>
> 4. Re: GrADS--Failure of display box to open with map
>
> (Jennifer Adams)
>
>
>
> ----------------------------------------------------------------------
>
>
> Message: 1
>
> Date: Wed, 13 Nov 2013 12:20:11 +0500
>
> From: asmat ullah <asmat-786 at hotmail.com>
>
> Subject: [gradsusr] need help regarding ploting annual cycle of three
>
> model data
>
> To: "gradsusr at gradsusr.org" <gradsusr at gradsusr.org>
>
> Message-ID: <COL131-W85884B2CFCF9A93E8B9EFEB1F90 at phx.gbl>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> hi,
>
> dear grad user i need help regarding ploting annual cycle of three model
> data, i want to plot cm2.0, CMAP and CRU data in one grade file and need a
> display that show annual cycle.
>
> please give me the script which can help me to solve this. i have monthly
> data file of common period which is 1979 to 2000.
>
> Regards
>
> ASMAT ULLAH
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131113/f98f0a7b/a
>
> ttachment-0001.html
>
>
> ------------------------------
>
>
> Message: 2
>
> Date: Wed, 13 Nov 2013 12:20:59 +0500
>
> From: asmat ullah <asmat-786 at hotmail.com>
>
> Subject: [gradsusr] need help regarding ploting annual cycle of three
>
> model data
>
> To: "gradsusr at gradsusr.org" <gradsusr at gradsusr.org>
>
> Message-ID: <COL131-W261B6479494263BC1C3DB7B1F90 at phx.gbl>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
> hi,
>
> dear grad user i need help regarding ploting annual cycle of three model
> data, i want to plot cm2.0, CMAP and CRU data in one grade file and need a
> display that show annual cycle.
>
> please give me the script which can help me to solve this. i have monthly
> data file of common period which is 1979 to 2000.
>
> Regards
>
> ASMAT ULLAH
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131113/ffcd3301/a
>
> ttachment-0001.html
>
>
> ------------------------------
>
>
> Message: 3
>
> Date: Wed, 13 Nov 2013 12:43:18 +0000
>
> From: "Mayes, Fred" <Fred.Mayes at eia.gov>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with
>
> map
>
> To: "gradsusr at gradsusr.org" <gradsusr at gradsusr.org>
>
> Message-ID:
>
> <4FEDC6B7C493EF49960054342C49B0FB01DD7DA0 at EIAMBX02.eia.doe.gov>
>
> Content-Type: text/plain; charset="us-ascii"
>
>
> I did not knowingly open in batch mode, but assuming I am in batch mode,
> how to I exit it so I can get the display window?
>
>
> Fred M.
>
>
> -----Original Message-----
>
> From: gradsusr-bounces at gradsusr.org
>
> [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of
>
> gradsusr-request at gradsusr.org
>
> Sent: Friday, November 08, 2013 4:12 PM
>
> To: gradsusr at gradsusr.org
>
> Subject: gradsusr Digest, Vol 45, Issue 13
>
>
> Send gradsusr mailing list submissions to
>
> gradsusr at gradsusr.org
>
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
> or, via email, send a message with subject or body 'help' to
>
> gradsusr-request at gradsusr.org
>
>
> You can reach the person managing the list at
>
> gradsusr-owner at gradsusr.org
>
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of gradsusr digest..."
>
>
>
> Today's Topics:
>
>
> 1. Re: GrADS--Failure of display box to open with map
>
> (Jennifer Adams)
>
> 2. Re: GrADS--Failure of display box to open with map
>
> (Eniola Olaniyan)
>
> 3. Re: GrADS--Failure of display box to open with map
>
> (Jennifer Adams)
>
>
>
> ----------------------------------------------------------------------
>
>
> Message: 1
>
> Date: Fri, 8 Nov 2013 13:53:05 -0500
>
> From: Jennifer Adams <jma at cola.iges.org>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID: <10475F8D-1019-4217-A88B-134D32BB0512 at cola.iges.org>
>
> Content-Type: text/plain; charset="windows-1252"
>
>
> You must be in batch mode, which does not open a display window. Did you
> use -b when you invoked GrADS ?
>
> --Jennifer
>
>
> On Nov 8, 2013, at 1:40 PM, Mayes, Fred wrote:
>
>
> I closed the GrADS application and restarted it, following the tutorial.
>
> Previously when I typed ?d ps? I got a second box with an isobar map in
> it.
>
> However, this time, I got no display box but simply the line in the
>
> command box,
>
> ?Contouring: 500 to 1000 interval 50?.
>
>
> Fred Mayes
>
> Senior Technology Analyst,
>
> Electricity, Coal, Nuclear and Renewables Office Energy
>
> Information Administration
>
> 1000 Independence Ave., SW EI-34
>
> Washington, DC 20585
>
> (202) 586-1508 (W)
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131108/fd5501fb/a
>
> ttachment-0001.html
>
>
> ------------------------------
>
>
> Message: 2
>
> Date: Fri, 8 Nov 2013 22:03:48 +0100
>
> From: Eniola Olaniyan <olaniyan.eniola67 at gmail.com>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID:
>
> <CANtiR=fVVNmFR2WOaZ8kgCWxeLEyGpCazWDqUwJLLxgYKkpu2Q at mail.gmail.com>
>
> Content-Type: text/plain; charset="windows-1252"
>
>
> dear Jennifer
>
>
> I am having Error reading lpoly_lowres.asc when I tried to run basemap
>
> script to
>
>
> mask the ocean and for only the plot on the land to be displayed
>
>
> I am using grads-2.0.2 on linux Ubuntu12.04
>
>
> Please I need help
>
>
>
>
>
> On Fri, Nov 8, 2013 at 7:53 PM, Jennifer Adams <jma at cola.iges.org> wrote:
>
>
> You must be in batch mode, which does not open a display window. Did
>
> you use -b when you invoked GrADS ?
>
> --Jennifer
>
>
> On Nov 8, 2013, at 1:40 PM, Mayes, Fred wrote:
>
>
> I closed the GrADS application and restarted it, following the tutorial.
>
> Previously when I typed ?d ps? I got a second box with an isobar map
>
> in it.
>
> However, this time, I got no display box but simply the line in the
>
> command box,
>
> ?Contouring: 500 to 1000 interval 50?.
>
>
> *Fred Mayes*
>
> Senior Technology Analyst,
>
> Electricity, Coal, Nuclear and Renewables Office Energy
>
> Information Administration
>
> 1000 Independence Ave., SW EI-34
>
> Washington, DC 20585
>
> *(202) 586-1508 (W)*
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
>
>
> --
>
>
>
>
> *Eniola OlaniyanResponsible Scientist NWPNigerian Meteorological
>
> Agency*
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131108/5d02df60/a
>
> ttachment-0001.html
>
>
> ------------------------------
>
>
> Message: 3
>
> Date: Fri, 8 Nov 2013 16:11:37 -0500
>
> From: Jennifer Adams <jma at cola.iges.org>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID: <D6BEF77F-9844-412D-80D6-D128A39789BA at cola.iges.org>
>
> Content-Type: text/plain; charset="windows-1252"
>
>
> You probably have to update your copy of basemap.gs with the full path to
> the ascii files.
>
> --Jennifer
>
> p.s. I recently wrote a doc page for basemap:
>
> http://iges.org/grads/gadoc/basemap.html
>
>
>
> On Nov 8, 2013, at 4:03 PM, Eniola Olaniyan wrote:
>
>
> dear Jennifer
>
>
> I am having Error reading lpoly_lowres.asc when I tried to run
>
> basemap script to
>
>
> mask the ocean and for only the plot on the land to be displayed
>
>
> I am using grads-2.0.2 on linux Ubuntu12.04
>
>
> Please I need help
>
>
>
>
>
> On Fri, Nov 8, 2013 at 7:53 PM, Jennifer Adams <jma at cola.iges.org> wrote:
>
> You must be in batch mode, which does not open a display window. Did you
> use -b when you invoked GrADS ?
>
> --Jennifer
>
>
> On Nov 8, 2013, at 1:40 PM, Mayes, Fred wrote:
>
>
> I closed the GrADS application and restarted it, following the tutorial.
>
> Previously when I typed ?d ps? I got a second box with an isobar map in
> it.
>
> However, this time, I got no display box but simply the line in
>
> the command box,
>
> ?Contouring: 500 to 1000 interval 50?.
>
>
> Fred Mayes
>
> Senior Technology Analyst,
>
> Electricity, Coal, Nuclear and Renewables Office Energy
>
> Information Administration
>
> 1000 Independence Ave., SW EI-34
>
> Washington, DC 20585
>
> (202) 586-1508 (W)
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
>
>
> --
>
> Eniola Olaniyan
>
> Responsible Scientist NWP
>
> Nigerian Meteorological Agency
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131108/69cf1ac2/a
>
> ttachment.html
>
>
> ------------------------------
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
> End of gradsusr Digest, Vol 45, Issue 13
>
> ****************************************
>
>
>
>
> ------------------------------
>
>
> Message: 4
>
> Date: Wed, 13 Nov 2013 07:57:55 -0500
>
> From: Jennifer Adams <jma at cola.iges.org>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with
>
> map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID: <582B0A8D-63C4-4D4F-B429-C68BE2F1A6D3 at cola.iges.org>
>
> Content-Type: text/plain; charset="us-ascii"
>
>
> You have to quit GrADS and start again. Batch mode is enabled with the
>
> -b option on startup. Type 'grads -help' for more info. --Jennifer
>
>
> On Nov 13, 2013, at 7:43 AM, Mayes, Fred wrote:
>
>
> I did not knowingly open in batch mode, but assuming I am in batch
>
> mode, how to I exit it so I can get the display window?
>
>
> Fred M.
>
>
> -----Original Message-----
>
> From: gradsusr-bounces at gradsusr.org
>
> [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of
>
> gradsusr-request at gradsusr.org
>
> Sent: Friday, November 08, 2013 4:12 PM
>
> To: gradsusr at gradsusr.org
>
> Subject: gradsusr Digest, Vol 45, Issue 13
>
>
> Send gradsusr mailing list submissions to
>
> gradsusr at gradsusr.org
>
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
> or, via email, send a message with subject or body 'help' to
>
> gradsusr-request at gradsusr.org
>
>
> You can reach the person managing the list at
>
> gradsusr-owner at gradsusr.org
>
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of gradsusr digest..."
>
>
>
> Today's Topics:
>
>
> 1. Re: GrADS--Failure of display box to open with map
>
> (Jennifer Adams)
>
> 2. Re: GrADS--Failure of display box to open with map
>
> (Eniola Olaniyan)
>
> 3. Re: GrADS--Failure of display box to open with map
>
> (Jennifer Adams)
>
>
>
> ---------------------------------------------------------------------
>
> -
>
>
> Message: 1
>
> Date: Fri, 8 Nov 2013 13:53:05 -0500
>
> From: Jennifer Adams <jma at cola.iges.org>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with
>
> map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID: <10475F8D-1019-4217-A88B-134D32BB0512 at cola.iges.org>
>
> Content-Type: text/plain; charset="windows-1252"
>
>
> You must be in batch mode, which does not open a display window. Did you
> use -b when you invoked GrADS ?
>
> --Jennifer
>
>
> On Nov 8, 2013, at 1:40 PM, Mayes, Fred wrote:
>
>
> I closed the GrADS application and restarted it, following the tutorial.
>
> Previously when I typed ?d ps? I got a second box with an isobar map in
> it.
>
> However, this time, I got no display box but simply the line in
>
> the command box,
>
> ?Contouring: 500 to 1000 interval 50?.
>
>
> Fred Mayes
>
> Senior Technology Analyst,
>
> Electricity, Coal, Nuclear and Renewables Office Energy
>
> Information Administration
>
> 1000 Independence Ave., SW EI-34
>
> Washington, DC 20585
>
> (202) 586-1508 (W)
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131108/fd5501fb/
>
> a
>
> ttachment-0001.html
>
>
> ------------------------------
>
>
> Message: 2
>
> Date: Fri, 8 Nov 2013 22:03:48 +0100
>
> From: Eniola Olaniyan <olaniyan.eniola67 at gmail.com>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with
>
> map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID:
>
> <CANtiR=fVVNmFR2WOaZ8kgCWxeLEyGpCazWDqUwJLLxgYKkpu2Q at mail.gmail.com>
>
> Content-Type: text/plain; charset="windows-1252"
>
>
> dear Jennifer
>
>
> I am having Error reading lpoly_lowres.asc when I tried to run
>
> basemap script to
>
>
> mask the ocean and for only the plot on the land to be displayed
>
>
> I am using grads-2.0.2 on linux Ubuntu12.04
>
>
> Please I need help
>
>
>
>
>
> On Fri, Nov 8, 2013 at 7:53 PM, Jennifer Adams <jma at cola.iges.org> wrote:
>
>
> You must be in batch mode, which does not open a display window. Did
>
> you use -b when you invoked GrADS ?
>
> --Jennifer
>
>
> On Nov 8, 2013, at 1:40 PM, Mayes, Fred wrote:
>
>
> I closed the GrADS application and restarted it, following the tutorial.
>
> Previously when I typed ?d ps? I got a second box with an isobar
>
> map in it.
>
> However, this time, I got no display box but simply the line in
>
> the command box,
>
> ?Contouring: 500 to 1000 interval 50?.
>
>
> *Fred Mayes*
>
> Senior Technology Analyst,
>
> Electricity, Coal, Nuclear and Renewables Office Energy
>
> Information Administration
>
> 1000 Independence Ave., SW EI-34
>
> Washington, DC 20585
>
> *(202) 586-1508 (W)*
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
>
>
> --
>
>
>
>
> *Eniola OlaniyanResponsible Scientist NWPNigerian Meteorological
>
> Agency*
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131108/5d02df60/
>
> a
>
> ttachment-0001.html
>
>
> ------------------------------
>
>
> Message: 3
>
> Date: Fri, 8 Nov 2013 16:11:37 -0500
>
> From: Jennifer Adams <jma at cola.iges.org>
>
> Subject: Re: [gradsusr] GrADS--Failure of display box to open with
>
> map
>
> To: GrADS Users Forum <gradsusr at gradsusr.org>
>
> Message-ID: <D6BEF77F-9844-412D-80D6-D128A39789BA at cola.iges.org>
>
> Content-Type: text/plain; charset="windows-1252"
>
>
> You probably have to update your copy of basemap.gs with the full path to
> the ascii files.
>
> --Jennifer
>
> p.s. I recently wrote a doc page for basemap:
>
> http://iges.org/grads/gadoc/basemap.html
>
>
>
> On Nov 8, 2013, at 4:03 PM, Eniola Olaniyan wrote:
>
>
> dear Jennifer
>
>
> I am having Error reading lpoly_lowres.asc when I tried to run
>
> basemap script to
>
>
> mask the ocean and for only the plot on the land to be displayed
>
>
> I am using grads-2.0.2 on linux Ubuntu12.04
>
>
> Please I need help
>
>
>
>
>
> On Fri, Nov 8, 2013 at 7:53 PM, Jennifer Adams <jma at cola.iges.org> wrote:
>
> You must be in batch mode, which does not open a display window. Did you
> use -b when you invoked GrADS ?
>
> --Jennifer
>
>
> On Nov 8, 2013, at 1:40 PM, Mayes, Fred wrote:
>
>
> I closed the GrADS application and restarted it, following the tutorial.
>
> Previously when I typed ?d ps? I got a second box with an isobar map in
> it.
>
> However, this time, I got no display box but simply the line in
>
> the command box,
>
> ?Contouring: 500 to 1000 interval 50?.
>
>
> Fred Mayes
>
> Senior Technology Analyst,
>
> Electricity, Coal, Nuclear and Renewables Office Energy
>
> Information Administration
>
> 1000 Independence Ave., SW EI-34
>
> Washington, DC 20585
>
> (202) 586-1508 (W)
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
>
>
> --
>
> Eniola Olaniyan
>
> Responsible Scientist NWP
>
> Nigerian Meteorological Agency
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131108/69cf1ac2/
>
> a
>
> ttachment.html
>
>
> ------------------------------
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
> End of gradsusr Digest, Vol 45, Issue 13
>
> ****************************************
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
>
> Jennifer M. Adams
>
> Center for Ocean-Land-Atmosphere Studies (COLA)
>
> 111 Research Hall, Mail Stop 2B3
>
> George Mason University
>
> 4400 University Drive
>
> Fairfax, VA 22030
>
>
>
>
>
>
> -------------- next part -------------- An HTML attachment was
>
> scrubbed...
>
> URL:
>
> http://gradsusr.org/pipermail/gradsusr/attachments/20131113/8720fbe0/a
>
> ttachment.html
>
>
> ------------------------------
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
>
> End of gradsusr Digest, Vol 45, Issue 22
>
> ****************************************
>
>
> _______________________________________________
>
> gradsusr mailing list
>
> gradsusr at gradsusr.org
>
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
> Jennifer M. Adams
> Center for Ocean-Land-Atmosphere Studies (COLA)
> 111 Research Hall, Mail Stop 2B3
> George Mason University
> 4400 University Drive
> Fairfax, VA 22030
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://gradsusr.org/pipermail/gradsusr/attachments/20131113/40ce12ea/attachment.html
>
> ------------------------------
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> End of gradsusr Digest, Vol 45, Issue 24
> ****************************************
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
> --
> Jennifer M. Adams
> Center for Ocean-Land-Atmosphere Studies (COLA)
> 111 Research Hall, Mail Stop 2B3
> George Mason University
> 4400 University Drive
> Fairfax, VA 22030
>
>
>
>
>
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20131115/e85c85c4/attachment-0001.html
More information about the gradsusr
mailing list