[gradsusr] looping program
wendi harjupa
wendiharjupa at gmail.com
Tue Dec 18 02:45:46 EST 2012
Dear Mr. Yunus
Thank you very much for your detail explanation
Now, I understood...
*>>I have only one question, is
> >>'ave(R,time=13Z10apr2004,time=22Z10apr2004' correct?, the part
> >>'time=13Z10apr2004'. I know for monthly data, I can use time=sep97 >>or
> time=sep1997. You data is not days, but 4 minutes, so maybe
> >>'hh:mmZddmmmyyyy' or '21:56Z10apr2004'. I hope someone else can >>answer
> this.*
>
> For your question above, I am not sure, and it will be my next
question. Honestly I tried it both, just like below :
1. 'ave(R,time=13Z10apr2004,time=22Z10apr2004)'
2. 'ave(R,time=13:00Z10apr2004,time=22:00Z10apr2004)'
Both of the script is ok, I could run, and plot the data for 2 days.
Best regards
wendi
>
> Yunus
>
>
>
>
> On Tue, Dec 18, 2012 at 1:36 PM, wendi harjupa <wendiharjupa at gmail.com>wrote:
>
>> Dear Mr Yunus
>>
>> Thank you very much for your detail explanation
>> Let me tells more about my data :
>>
>> On Tue, Dec 18, 2012 at 1:32 PM, Muhammad Yunus Ahmad Mazuki <
>> ukm.yunus at gmail.com> wrote:
>>
>>> >>I would like to raise a question. You used "TDEF 300 LINEAR
>>> >>13:00Z10apr2004 4mn". Every 4 minutes means, there's 150 data >>point
>>> for 10 hours for one day. How many file are you templating? >>What are the
>>> times in the files? If you said 10 days, that means 1500 >>data point for
>>> for 10 hours for 10 days.
>>>
>>> *my file data consist of day and hour (one day folder consist 24 hours
>> data)*
>> *For example : 20040410 (folder) consist (1000.dat, 1001.dat,...1023.dat)
>> *
>> *now the set of data consist of 29 days data in the different month
>> (from 10 april until 9 may)*
>>
>> >>But if your files are hours and minutes, and jumps from 2200 day 1 to
>> >>1300 day 2, if I'm not wrong, that 1300 day 2 will be registered as
>> >>2300 day 1 in GrADS. You can check by typing "set t 150" and "set t
>> >>151" to see the date registered to it. You can also use
>>
>>>
>>> >>'R1=ave(R,time=1,time=150)+ave(R,time=151,time=300)'
>>>
>>> *The time from 1 - 150 is means from 00 am - 10 am right??*
>> *and the time from 151 - 300 is 11 am - 21 pm right?? *
>>
>> >>I believe you intend to only template 2 files, and your tdef is
>>> correct. >>But are there only two file in the folder you're working on?, if
>>> >>there's more, that might be a problem.
>>
>>
>> I think I have to use more time in tdef (maybe 600??)..
>> in one folder day data contain 24 hours data, so maybe I have to tdef
>> around 3600, for making average for 10 days data, because one day data will
>> contain 360 time??
>>
>> Please explain me more Mr. Yunus.
>>
>> Thank you very much
>>
>> Best regards,
>> wendi
>>
>>
>>>
>>>
>>> Yunus
>>>
>>>
>>>
>>> On Tue, Dec 18, 2012 at 10:03 AM, wendi harjupa <wendiharjupa at gmail.com>wrote:
>>>
>>>> Dear Jennifer
>>>>
>>>> Thank you very much for your detail explanation.
>>>> It help me much.
>>>>
>>>> Best regards,
>>>> wendi
>>>>
>>>> On Tue, Dec 18, 2012 at 3:46 AM, Jennifer Adams <jma at cola.iges.org>wrote:
>>>>
>>>>>
>>>>> On Dec 17, 2012, at 1:13 PM, Jeff Duda wrote:
>>>>>
>>>>> Remove LITTLE_ENDIAN from your options line. There's no such option.
>>>>>
>>>>> This statement is incorrect. "Little endian" is a perfectly acceptable
>>>>> keyword for the OPTIONS entry.
>>>>> Please consult the documentation before making declarations like this
>>>>> in the forum!!!
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Dec 17, 2012 at 5:13 AM, wendi harjupa <wendiharjupa at gmail.com
>>>>> > wrote:
>>>>>
>>>>>> Dear Mr. Jeff
>>>>>>
>>>>>> I have tried the script that you sent but, still I could not do this
>>>>>> would you please help me more.
>>>>>>
>>>>>> Here some question
>>>>>> 1. Is my control file ok?
>>>>>> I want to use single control file
>>>>>>
>>>>> You didn't mention what your file names look like. Do they match your
>>>>> template substitution strings?
>>>>> The way you have it set up, the file 20040410/1013.dat should contain
>>>>> 15 grids, one for every 4 minutes. If not, then something is wrong with the
>>>>> way you've set it up but you need to tell us more about your data files
>>>>> first.
>>>>>
>>>>>
>>>>> 2. base on my gs and control file below, I got error message
>>>>>> 'Cannot contour grid - all undefined values'
>>>>>>
>>>>> This means there is no data file for the time specified in your
>>>>> dimension environment, or else (if the file exists) all the data in that
>>>>> file are the same as the missing value.
>>>>>
>>>>>
>>>>> 'Cannot plot color bar: No shading information'
>>>>>>
>>>>> If you try to query the shade levels when no plot has been drawn (due
>>>>> to error mentioned above), then this is the error message you will get.
>>>>>
>>>>> 'No hardcopy metafile open'
>>>>>>
>>>>> This is because you have use the 'disable print' command without using
>>>>> 'enable print' first. If all you want is the image output from the printim
>>>>> command, then remove the 'disable print' from your script.
>>>>>
>>>>> --Jennifer
>>>>>
>>>>>
>>>>> what the meaning of error message??
>>>>>>
>>>>>> below is control file (*try.ctl)* file
>>>>>>
>>>>>> DSET /misc/home/wendi/data1/radar/kototabang/XDR/data/*
>>>>>> %y4%m2%d2/%d2%h2.dat*
>>>>>> TITLE RADAR
>>>>>> OPTIONS TEMPLATE LITTLE_ENDIAN
>>>>>> UNDEF -1000
>>>>>> XDEF 321 LINEAR 99.688120996 0.004492369
>>>>>> YDEF 321 LINEAR -1.083708891 0.004522556
>>>>>> ZDEF 39 LINEAR 1.0 0.5
>>>>>> TDEF 300 LINEAR 13:00Z10apr2004 4mn
>>>>>> VARS 2
>>>>>> ref 39 99 Reflectivity(dBZ)
>>>>>> vel 39 99 Doppler Velocity(m/s)
>>>>>> ENDVARS
>>>>>>
>>>>>> this is my gs file (averaging for 2 days only)
>>>>>>
>>>>>> 'reinit'
>>>>>> 'open *try.ctl*'
>>>>>> 'set grads off'
>>>>>> 'set mproj latlon'
>>>>>> 'set mpdset hires'
>>>>>> 'set gxout shaded'
>>>>>> 'set lon 100 100.82'
>>>>>> 'set lat -0.7 0'
>>>>>> 'set z 5'
>>>>>> 'set parea 1 7.5 2.8 8.3'
>>>>>> 'set clevs 0 5 10 15 20 25 30 35 40 45 50 55 60'
>>>>>> 'set ccols 9 14 4 11 5 13 3 10 7 12 8 2 6'
>>>>>> 'set t 1 300'
>>>>>> 'R=pow(10, ref/10)'
>>>>>>
>>>>>> 'R1=ave(R,time=13Z10apr2004,time=22Z10apr2004)+ave(R,time=13Z11apr2004,time=22Z11apr2004)'
>>>>>> 'R2=R1/2'
>>>>>> 'R3=log10 (R2)'
>>>>>> 'd 10*R3'
>>>>>> 'run /misc/home/wendi/grads-2.0.1/cbarn 0.7 0.7 7.4 5.5'
>>>>>> 'draw string 7.2 8.1 [dBz]'
>>>>>> 'draw xlab longitude'
>>>>>> 'draw ylab latitude'
>>>>>> 'set mproj latlon'
>>>>>> 'set mpdset hires'
>>>>>> 'set grid off'
>>>>>>
>>>>>> 'close 1'
>>>>>>
>>>>>> 'printim baru.gif white'
>>>>>> 'disable print'
>>>>>>
>>>>>> 'close 1'
>>>>>>
>>>>>> Thank you very much for your help
>>>>>> best regards,
>>>>>> wendi
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sun, Dec 16, 2012 at 7:03 PM, wendi harjupa <
>>>>>> wendiharjupa at gmail.com> wrote:
>>>>>>
>>>>>>> Dear Mr. Jeff
>>>>>>>
>>>>>>> Thank you very much for your detail explanation
>>>>>>> I will try it.
>>>>>>>
>>>>>>> Best regards,
>>>>>>> wendi
>>>>>>>
>>>>>>>
>>>>>>> On Sat, Dec 15, 2012 at 2:24 AM, Jeff Duda <jeffduda319 at gmail.com>wrote:
>>>>>>>
>>>>>>>> Wendi,
>>>>>>>> Assuming your radar data are available at the same time every day,
>>>>>>>> create an overall average and add daily averages to it. Then take the
>>>>>>>> average of the averages at the end. If you have differing numbers of radar
>>>>>>>> valid times each day, you should take a weighted average based on the
>>>>>>>> number of data slices available each day.
>>>>>>>>
>>>>>>>> Do you plan to access each day's radar data using a separate
>>>>>>>> control file or using a single control file? This distinction makes a
>>>>>>>> difference in how best to code your script. You could either do it one day
>>>>>>>> at a time, or sum all days in one line. That is, you could do it like this:
>>>>>>>>
>>>>>>>> 'reinit'
>>>>>>>> 'sumaverage = 0'
>>>>>>>> dd = 1
>>>>>>>> while (dd <= 10)
>>>>>>>> 'open [DAY dd CONTROL FILE]'
>>>>>>>> 'set grads off'
>>>>>>>> 'set mproj latlon'
>>>>>>>> 'set mpdset hires'
>>>>>>>> 'set gxout shaded'
>>>>>>>> 'set lon 100 100.82'
>>>>>>>> 'set lat -0.7 0'
>>>>>>>> 'set z 3600'
>>>>>>>> 'set parea 1 7.5 2.8 8.3'
>>>>>>>> 'set clevs 0 5 10 15 20 25 30 35 40 45 50 55 60'
>>>>>>>> 'set ccols 9 14 4 11 5 13 3 10 7 12 8 2 6'
>>>>>>>> 'set t 1 3600'
>>>>>>>> 'R=pow(10, ref/10)'
>>>>>>>>
>>>>>>>> day = dd + 9
>>>>>>>> 'R1=ave(R,time=13Z'dd'APR2004,time=22Z'dd'APR2004)'
>>>>>>>> 'sumaverage = sumaverage + R1'
>>>>>>>> dd = dd + 1
>>>>>>>> endwhile
>>>>>>>> 'average = sumaverage / 10'
>>>>>>>> ...color table options...
>>>>>>>> ...map options...
>>>>>>>> 'd average'
>>>>>>>> 'printim try.gif white'
>>>>>>>>
>>>>>>>> OR like this
>>>>>>>>
>>>>>>>> 'reinit'
>>>>>>>> 'open [ALL INCLUSIVE CONTROL FILE]'
>>>>>>>> 'set grads off'
>>>>>>>> 'set mproj latlon'
>>>>>>>> 'set mpdset hires'
>>>>>>>> 'set gxout shaded'
>>>>>>>> 'set lon 100 100.82'
>>>>>>>> 'set lat -0.7 0'
>>>>>>>> 'set z 3600'
>>>>>>>> 'set parea 1 7.5 2.8 8.3'
>>>>>>>> 'set clevs 0 5 10 15 20 25 30 35 40 45 50 55 60'
>>>>>>>> 'set ccols 9 14 4 11 5 13 3 10 7 12 8 2 6'
>>>>>>>> 'set t 1 3600'
>>>>>>>> 'R=pow(10, ref/10)'
>>>>>>>>
>>>>>>>> 'R1=ave(R,time=13Z10APR2004,time=22Z10APR2004)+ave(R,time=13Z11APR2004,time=22Z11APR2004)+ave(R,time=13Z12APR2004,time=22Z12APR2004)+ave(R,time=13Z13APR2004,time=22Z13APR2004)+ave(R,time=13Z14APR2004,time=22Z14APR2004)+ave(R,time=13Z15APR2004,time=22Z15APR2004)+ave(R,time=13Z16APR2004,time=22Z16APR2004)+ave(R,time=13Z17APR2004,time=22Z17APR2004)+ave(R,time=13Z18APR2004,time=22Z18APR2004)+ave(R,time=13Z19APR2004,time=22Z19APR2004)'
>>>>>>>> ...color table options...
>>>>>>>> ...map options...
>>>>>>>> 'd R1/10'
>>>>>>>> 'printim try.gif white'
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Dec 14, 2012 at 12:20 AM, wendi harjupa <
>>>>>>>> wendiharjupa at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Dear Jeff
>>>>>>>>>
>>>>>>>>> Thank you very much for your solution,
>>>>>>>>>
>>>>>>>>> I need to make average for 10 days, how to make loop for the next
>>>>>>>>> day (same time/13-22)??
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>> On Fri, Dec 14, 2012 at 1:06 PM, Jeff Duda <jeffduda319 at gmail.com>wrote:
>>>>>>>>>
>>>>>>>>>> Change the line
>>>>>>>>>> 'R1=ave(R, t=1, t=3600)'
>>>>>>>>>>
>>>>>>>>>> to
>>>>>>>>>>
>>>>>>>>>> 'R1=ave(R,time=13Z10APR2004,time=22Z10APR2004)'
>>>>>>>>>>
>>>>>>>>>> Jeff Duda
>>>>>>>>>>
>>>>>>>>>> On Thu, Dec 13, 2012 at 8:42 PM, wendi harjupa <
>>>>>>>>>> wendiharjupa at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Dear Sir/Madam
>>>>>>>>>>>
>>>>>>>>>>> Please I need your help.
>>>>>>>>>>> I have one set data (10 days data)
>>>>>>>>>>>
>>>>>>>>>>> How to make looping to make reflectivity average for only 10
>>>>>>>>>>> hours on every day (13hrs-22hrs only)??
>>>>>>>>>>>
>>>>>>>>>>> Below is my ctl and gs script
>>>>>>>>>>>
>>>>>>>>>>> try.ctl
>>>>>>>>>>>
>>>>>>>>>>> DSET
>>>>>>>>>>> /misc/home/wendi/data1/radar/kototabang/XDR/data/%y4%m2%d2/%d2%h2.dat
>>>>>>>>>>> TITLE RADAR
>>>>>>>>>>> OPTIONS TEMPLATE LITTLE_ENDIAN
>>>>>>>>>>> UNDEF -1000
>>>>>>>>>>> XDEF 321 LINEAR 99.688120996 0.004492369
>>>>>>>>>>> YDEF 321 LINEAR -1.083708891 0.004522556
>>>>>>>>>>> ZDEF 39 LINEAR 1.0 0.5
>>>>>>>>>>> TDEF 3600 LINEAR 00:00Z10apr2004 4mn
>>>>>>>>>>> VARS 2
>>>>>>>>>>> ref 39 99 Reflectivity(dBZ)
>>>>>>>>>>> vel 39 99 Doppler Velocity(m/s)
>>>>>>>>>>> ENDVARS
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> script.gs
>>>>>>>>>>>
>>>>>>>>>>> 'reinit'
>>>>>>>>>>> 'open try.ctl'
>>>>>>>>>>> 'set grads off'
>>>>>>>>>>> 'set mproj latlon'
>>>>>>>>>>> 'set mpdset hires'
>>>>>>>>>>> 'set gxout shaded'
>>>>>>>>>>> 'set lon 100 100.82'
>>>>>>>>>>> 'set lat -0.7 0'
>>>>>>>>>>> 'set z 3600'
>>>>>>>>>>> 'set parea 1 7.5 2.8 8.3'
>>>>>>>>>>> 'set clevs 0 5 10 15 20 25 30 35 40 45 50 55 60'
>>>>>>>>>>> 'set ccols 9 14 4 11 5 13 3 10 7 12 8 2 6'
>>>>>>>>>>> 'set t 1 3600'
>>>>>>>>>>> 'R=pow(10, ref/10)'
>>>>>>>>>>>
>>>>>>>>>>> 'R1=ave(R, t=1, t=3600)'
>>>>>>>>>>> 'set t 1'
>>>>>>>>>>> 'R2=log10 (R1)'
>>>>>>>>>>> 'd 10*R2'
>>>>>>>>>>> 'run /misc/home/wendi/grads-2.0.1/cbarn 0.7 0.7 7.4 5.5'
>>>>>>>>>>> 'draw string 7.2 8.1 [dBz]'
>>>>>>>>>>> 'draw xlab longitude'
>>>>>>>>>>> 'draw ylab latitude'
>>>>>>>>>>> 'set mproj latlon'
>>>>>>>>>>> 'set mpdset hires'
>>>>>>>>>>> 'set grid off'
>>>>>>>>>>>
>>>>>>>>>>> 'close 1'
>>>>>>>>>>>
>>>>>>>>>>> 'printim try.gif white'
>>>>>>>>>>> 'disable print'
>>>>>>>>>>>
>>>>>>>>>>> 'close 1'
>>>>>>>>>>>
>>>>>>>>>>> Thank you very much for your help
>>>>>>>>>>>
>>>>>>>>>>> Best regards,
>>>>>>>>>>> wendi
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> -------------
>>>>>>>>>>> Wendi Harjupa. ST
>>>>>>>>>>> Shimane University Graduate School of Engineering Sciences
>>>>>>>>>>> Department of Electronic Control Systems
>>>>>>>>>>> Remote Sensing Laboratory
>>>>>>>>>>> s119447
>>>>>>>>>>> Cellphone : +81-080-4268-6676
>>>>>>>>>>> email : wendi at rslab.riko.shimane-u.ac.jp
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> gradsusr mailing list
>>>>>>>>>>> gradsusr at gradsusr.org
>>>>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Jeff Duda
>>>>>>>>>> Graduate research assistant
>>>>>>>>>> University of Oklahoma School of Meteorology
>>>>>>>>>> Center for Analysis and Prediction of Storms
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> gradsusr mailing list
>>>>>>>>>> gradsusr at gradsusr.org
>>>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> -------------
>>>>>>>>> Wendi Harjupa. ST
>>>>>>>>> Shimane University Graduate School of Engineering Sciences
>>>>>>>>> Department of Electronic Control Systems
>>>>>>>>> Remote Sensing Laboratory
>>>>>>>>> s119447
>>>>>>>>> Cellphone : +81-080-4268-6676
>>>>>>>>> email : wendi at rslab.riko.shimane-u.ac.jp
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> gradsusr mailing list
>>>>>>>>> gradsusr at gradsusr.org
>>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Jeff Duda
>>>>>>>> Graduate research assistant
>>>>>>>> University of Oklahoma School of Meteorology
>>>>>>>> Center for Analysis and Prediction of Storms
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> gradsusr mailing list
>>>>>>>> gradsusr at gradsusr.org
>>>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> -------------
>>>>>>> Wendi Harjupa. ST
>>>>>>> Shimane University Graduate School of Engineering Sciences
>>>>>>> Department of Electronic Control Systems
>>>>>>> Remote Sensing Laboratory
>>>>>>> s119447
>>>>>>> Cellphone : +81-080-4268-6676
>>>>>>> email : wendi at rslab.riko.shimane-u.ac.jp
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> -------------
>>>>>> Wendi Harjupa. ST
>>>>>> Shimane University Graduate School of Engineering Sciences
>>>>>> Department of Electronic Control Systems
>>>>>> Remote Sensing Laboratory
>>>>>> s119447
>>>>>> Cellphone : +81-080-4268-6676
>>>>>> email : wendi at rslab.riko.shimane-u.ac.jp
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> gradsusr mailing list
>>>>>> gradsusr at gradsusr.org
>>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Jeff Duda
>>>>> Graduate research assistant
>>>>> University of Oklahoma School of Meteorology
>>>>> Center for Analysis and Prediction of Storms
>>>>>
>>>>> _______________________________________________
>>>>> gradsusr mailing list
>>>>> gradsusr at gradsusr.org
>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>
>>>>>
>>>>> --
>>>>> Jennifer M. Adams
>>>>> IGES/COLA
>>>>> 4041 Powder Mill Road, Suite 302
>>>>> Calverton, MD 20705
>>>>> jma at cola.iges.org
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> gradsusr mailing list
>>>>> gradsusr at gradsusr.org
>>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> -------------
>>>> Wendi Harjupa. ST
>>>> Shimane University Graduate School of Engineering Sciences
>>>> Department of Electronic Control Systems
>>>> Remote Sensing Laboratory
>>>> s119447
>>>> Cellphone : +81-080-4268-6676
>>>> email : wendi at rslab.riko.shimane-u.ac.jp
>>>>
>>>>
>>>> _______________________________________________
>>>> gradsusr mailing list
>>>> gradsusr at gradsusr.org
>>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>>
>>>>
>>>
>>> _______________________________________________
>>> gradsusr mailing list
>>> gradsusr at gradsusr.org
>>> http://gradsusr.org/mailman/listinfo/gradsusr
>>>
>>>
>>
>>
>> --
>> -------------
>> Wendi Harjupa. ST
>> Shimane University Graduate School of Engineering Sciences
>> Department of Electronic Control Systems
>> Remote Sensing Laboratory
>> s119447
>> Cellphone : +81-080-4268-6676
>> email : wendi at rslab.riko.shimane-u.ac.jp
>>
>>
>> _______________________________________________
>> gradsusr mailing list
>> gradsusr at gradsusr.org
>> http://gradsusr.org/mailman/listinfo/gradsusr
>>
>>
>
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr
>
>
--
-------------
Wendi Harjupa. ST
Shimane University Graduate School of Engineering Sciences
Department of Electronic Control Systems
Remote Sensing Laboratory
s119447
Cellphone : +81-080-4268-6676
email : wendi at rslab.riko.shimane-u.ac.jp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20121218/0a53a1fa/attachment-0003.html
More information about the gradsusr
mailing list