[gradsusr] shore line and mark the station

Charles Seman Charles.Seman at noaa.gov
Mon Jun 20 11:29:50 EDT 2011


Rusmawan,

Please check out also:
http://cookbooks.opengrads.org/index.php?title=Recipe-026:_Using_World_Coordinates_to_Annotate_your_Plots

Hope this helps,
Chuck

Rusmawan Suwarman wrote:
> Thank you Andre Pattantyus for the Advice
> Best Regards
>  
> Rusmawan Suwarman
> ---------------------------------------------
> Doctoral Students
> Department of Life and Environmental Sciences
> Graduate School of Sciences and Technology
> Kumamoto University
> 
> 
> ------------------------------------------------------------------------
> *From:* Andre Pattantyus <apattantyus2008 at my.fit.edu>
> *To:* GrADS Users Forum <gradsusr at gradsusr.org>
> *Sent:* Sun, 19 June, 2011 10:44:24
> *Subject:* Re: [gradsusr] shore line and mark the station
> 
> you need to use draw string but this means you need to use virtual page 
> x,y values for the location which are in inches from lower left corner 
> of virtual page. so you will have to eye it out until it is where you 
> want it. sorry for the confusion.
> 
> On Fri, Jun 17, 2011 at 10:56 PM, Rusmawan Suwarman 
> <rusmedong at yahoo.co.uk <mailto:rusmedong at yahoo.co.uk>> wrote:
> 
>     Thank you Andre Pattantyus
>     but how to write the text near that mark?
>     Thanks in advance
>      
>     Rusmawan Suwarman
>     ---------------------------------------------
>     Doctoral Students
>     Department of Life and Environmental Sciences
>     Graduate School of Sciences and Technology
>     Kumamoto University
> 
> 
>     ------------------------------------------------------------------------
>     *From:* Andre Pattantyus <apattantyus2008 at my.fit.edu
>     <mailto:apattantyus2008 at my.fit.edu>>
>     *To:* GrADS Users Forum <gradsusr at gradsusr.org
>     <mailto:gradsusr at gradsusr.org>>
>     *Sent:* Fri, 17 June, 2011 7:03:45
>     *Subject:* Re: [gradsusr] shore line and mark the station
> 
>     use the command
>     'q w2gr lat lon' for the station location of your mark to get the
>     grid location. then adjust accordingly for to place the mark
>     beside/below etc.
>      
>     Andre
> 
>     On Thu, Jun 16, 2011 at 3:43 AM, Rusmawan Suwarman
>     <rusmedong at yahoo.co.uk <mailto:rusmedong at yahoo.co.uk>> wrote:
> 
>         Dear All,
>         Can you help me how to display only the shoreline, and the other
>         thing is
>         after command 'draw mark', I want to write the label of the
>         station name near the mark
>         how should I do?
>         Thank you very much in advance
> 
>          
>         Rusmawan Suwarman
>         ---------------------------------------------
>         Doctoral Students
>         Department of Life and Environmental Sciences
>         Graduate School of Sciences and Technology
>         Kumamoto University
> 
> 
>         _______________________________________________
>         gradsusr mailing list
>         gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
>         http://gradsusr.org/mailman/listinfo/gradsusr
> 
> 
> 
> 
>     -- 
>     Andre Pattantyus, Graduate Student Research Assistant
>     Marine and Environmental Systems, Florida Institute of Technology
>     150 W. University Blvd, Melbourne, FL 32901
> 
>     Phone: (321) 674-8330 | Fax: (321) 674-7212 | Email:
>     apattantyus2008 at fit.edu <mailto:apattantyus2008 at fit.edu>
> 
>     _______________________________________________
>     gradsusr mailing list
>     gradsusr at gradsusr.org <mailto:gradsusr at gradsusr.org>
>     http://gradsusr.org/mailman/listinfo/gradsusr
> 
> 
> 
> 
> -- 
> Andre Pattantyus, Graduate Student Research Assistant
> Marine and Environmental Systems, Florida Institute of Technology
> 150 W. University Blvd, Melbourne, FL 32901
> 
> Phone: (321) 674-8330 | Fax: (321) 674-7212 | Email: 
> apattantyus2008 at fit.edu <mailto:apattantyus2008 at fit.edu>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> gradsusr mailing list
> gradsusr at gradsusr.org
> http://gradsusr.org/mailman/listinfo/gradsusr

-- 

Please note that Charles.Seman at noaa.gov should be considered my NOAA
email address, not cjs at gfdl.noaa.gov.

********************************************************************
  Charles Seman                                Charles.Seman at noaa.gov
  U.S. Department of Commerce / NOAA / OAR
  Geophysical Fluid Dynamics Laboratory         voice: (609) 452-6547
  201 Forrestal Road                              fax: (609) 987-5063
  Princeton, NJ  08540-6649            http://www.gfdl.noaa.gov/~cjs/
********************************************************************

"The contents of this message are mine personally and do not reflect any
official or unofficial position of the United States Federal Government,
the United States Department of Commerce, or NOAA."



More information about the gradsusr mailing list