From r.hachelaf at gmail.com Tue Jun 1 03:41:38 2010 From: r.hachelaf at gmail.com (hachelaf rabah) Date: Tue, 1 Jun 2010 09:41:38 +0200 Subject: [gradsusr] How to make a bufr descriptor file whith bufrscan and read it In-Reply-To: References: Message-ID: Hello, > i have a prepbufr file named "prepbufr.in" > when i type thise line commande "./bufrscan -h ../tables prepbufr.in" > i have a succeded messages like that : > =============================================================== > >>> processing message 5 > >>> start of message > 0 63 000 (numeric) BYTCNT > 3 48 121 (sequence) > 3 48 001 (sequence) > 0 01 194 (text) SID STATION IDENTIFICATION > 0 06 240 (numeric) XOB LONGITUDE > 0 05 002 (numeric) YOB LATITUDE > 0 04 215 (numeric) DHR OBSERVATION TIME MINUS CYCLE TIME > 0 10 199 (numeric) ELV STATION ELEVATION > 0 55 007 (numeric) TYP PREPBUFR REPORT TYPE > 0 55 008 (numeric) T29 DATA DUMP REPORT TYPE > 0 55 009 (numeric) TSB REPORT SUBTYPE (HAS VARIOUS MEANINGS > DEPENDING ON TYPE) > 0 02 195 (numeric) ITP INSTRUMENT TYPE > 0 50 001 (numeric) SQN REPORT SEQUENCE NUMBER > 0 50 003 (numeric) PROCN PROCESS NUMBER FOR THIS MPI RUN (OBTAINED > FROM SCRIPT) > 0 04 214 (numeric) RPT REPORTED OBSERVATION TIME > 0 04 216 (numeric) TCOR INDICATOR WHETHER OBS. TIME IN "DHR" WAS > CORRECTED > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 081 (sequence) > 0 35 200 (numeric) RSRD RESTRICTIONS ON REDISTRIBUTION > 0 35 201 (numeric) EXPRSRD EXPIRATION OF RESTRICTIONS ON > REDISTRIBUTION > 0 08 193 (numeric) CAT PREPBUFR DATA LEVEL CATEGORY > 0 01 007 (numeric) SAID SATELLITE IDENTIFIER (SATELLITE REPORTS > ONLY) > 0 06 034 (numeric) CTCN CROSS TRACK CELL NUMBER (QUIKSCAT & ASCAT > REPORTS ONLY) > 0 21 155 (numeric) WVCQ WIND VECTOR CELL QUALITY (ASCAT REPORTS > ONLY) > 0 21 156 (numeric) BSCD BACKSCATTER DISTANCE (ASCAT REPORTS ONLY) > 0 21 104 (numeric) LKCS LIKELIHOOD COMPUTED FOR SOLUTION (ASCAT > REPORTS ONLY) > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 141 (sequence) > 3 60 003 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 001 (replication count) > 3 48 171 (sequence) > 0 07 245 (numeric) POB PRESSURE OBSERVATION > 0 07 246 (numeric) PQM PRESSURE (QUALITY) MARKER > 0 07 247 (numeric) PPC PRESSURE EVENT PROGRAM CODE > 0 07 248 (numeric) PRC PRESSURE EVENT REASON CODE > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 191 (sequence) > 0 07 250 (numeric) POE PRESSURE OBSERVATION ERROR > 0 07 249 (numeric) PFC FORECAST (BACKGROUND) PRESSURE VALUE > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 241 (sequence) > 0 07 255 (numeric) PFCMOD MODEL PRESSURE FORECAST VALUE (GLOBAL > MODEL SEE PFC) > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 211 (sequence) > 0 07 251 (numeric) PAN ANALYZED PRESSURE VALUE > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 231 (sequence) > 0 07 252 (numeric) PCL CLIMATOLOGICAL PRESSURE VALUE > 0 07 253 (numeric) PCS STANDARD DEVIATION OF CLIMATOLOGICAL > PRESSURE VALUE > 0 07 254 (numeric) POETU ANALYSIS-TUNED PRESSURE OBSERVATION > ERROR > 0 33 204 (numeric) PVWTG ANAL VARIATIONAL QC WEIGHT ON PRESS. OBS > BASED ON GUESS > 0 33 205 (numeric) PVWTA ANAL VARIATIONAL QC WEIGHT ON PRESS. OBS > BASED ON ANAL > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 145 (sequence) > 3 60 003 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 001 (replication count) > 3 48 175 (sequence) > 0 11 003 (numeric) UOB U-COMPONENT WIND OBSERVATION > 0 11 004 (numeric) VOB V-COMPONENT WIND OBSERVATION > 0 11 240 (numeric) WQM U-, V-COMPONENT WIND (UOB/VOB) (QUALITY) > MARKER > 0 11 241 (numeric) WPC U-, V-COMPONENT WIND (UOB/VOB) EVENT > PROGRAM CODE > 0 11 242 (numeric) WRC U-, V-COMPONENT WIND (UOB/VOB) EVENT > REASON CODE > 3 60 003 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 001 (replication count) > 3 48 176 (sequence) > 0 11 001 (numeric) DDO WIND DIRECTION OBSERVATION (NOT > ASSIMILATED) > 0 11 252 (numeric) FFO WIND SPEED OBSERVATION (NOT ASSIMILATED) > 0 11 218 (numeric) DFQ WIND DIRECTION/SPEED (DDO/FFO) (QUALITY) > MARKER > 0 11 219 (numeric) DFP WIND DIRECTION/SPEED (DDO/FFO) EVENT > PROGRAM CODE > 0 11 220 (numeric) DFR WIND DIRECTION/SPEED (DDO/FFO) EVENT > REASON CODE > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 195 (sequence) > 0 11 245 (numeric) WOE WIND OBSERVATION ERROR > 0 11 243 (numeric) UFC FORECAST (BACKGROUND) U-COMPONENT WIND > VALUE > 0 11 244 (numeric) VFC FORECAST (BACKGROUND) V-COMPONENT WIND > VALUE > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 245 (sequence) > 0 11 254 (numeric) UFCMOD MODEL U-COMPONENT FORECAST VALUE > (GLOBAL MODEL SEE UFC) > 0 11 255 (numeric) VFCMOD MODEL V-COMPONENT FORECAST VALUE > (GLOBAL MODEL SEE VFC) > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 215 (sequence) > 0 11 246 (numeric) UAN ANALYZED U-COMPONENT WIND VALUE > 0 11 247 (numeric) VAN ANALYZED V-COMPONENT WIND VALUE > 3 60 004 (sequence) > 1 01 000 (replicate next 1, not including replication count) > 0 31 000 (replication count) > 3 48 235 (sequence) > 0 11 248 (numeric) UCL CLIMATOLOGICAL U-COMPONENT WIND VALUE > 0 11 250 (numeric) UCS STANDARD DEVIATION OF CLIMATOLOGICAL > U-COMP WIND VALUE > 0 11 249 (numeric) VCL CLIMATOLOGICAL V-COMPONENT WIND VALUE > 0 11 251 (numeric) VCS STANDARD DEVIATION OF CLIMATOLOGICAL > V-COMP WIND VALUE > 0 11 253 (numeric) WOETU ANALYSIS-TUNED WIND OBSERVATION ERROR > 0 33 212 (numeric) WVWTG ANAL VARIATIONAL QC WEIGHT ON WIND OBS > BASED ON GUESS > 0 33 213 (numeric) WVWTA ANAL VARIATIONAL QC WEIGHT ON WIND OBS > BASED ON ANAL > 0 11 225 (numeric) RF10M 10 METER WIND REDUCTION FACTOR > 1 02 000 (replicate next 2, not including replication count) > 0 31 001 (replication count) > 2 06 001 (operator) > 0 63 255 (numeric) BITPAD > ============================================================= > so can you help me to generat a descriptor file and, who to read data from > a bufr file with grads > > Thank you advanced . > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100601/fa422d2c/attachment-0001.html From Wesley.Ebisuzaki at noaa.gov Tue Jun 1 09:26:56 2010 From: Wesley.Ebisuzaki at noaa.gov (Wesley Ebisuzaki) Date: Tue, 01 Jun 2010 09:26:56 -0400 Subject: [gradsusr] shift longitude range in grib2 file from 0->360 to -180->180 In-Reply-To: References: Message-ID: <4C050AA0.8000900@noaa.gov> P.R. > can this be achieved by simply using wgrib2, or would I need to > convert the data in grads, and then export&convert back to grib2? With the May 2010 version of wgrib2, wgrib2 in.grb -lola 180:720:0.5 -90:361:0.5 out.grb grib I don't like -lola because it does nearest neighbor interpolation but it is not a problem for you. Wesley P. R.M. wrote: > I have a grib2 dataset (gfs winds) that spans 0-360 degrees longitude, > in 0.5 degree increments. > I need to convert this dataset into the range from -180 to 180, so I > need the grid to start at 180 degrees longitude instead of at 0 > degrees longitude. (fyi, the 0-360 range simply doesnt work for a > custom application that Im running). > > how can I perform this conversion, and store back into grib2 format? > can this be achieved by simply using wgrib2, or would I need to > convert the data in grads, and then export&convert back to grib2? > > please help, > thanks, > p.r. > > The New Busy is not the too busy. Combine all your e-mail accounts > with Hotmail. Get busy. > > > ------------------------------------------------------------------------ > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > From h.meteo.shirazu at gmail.com Tue Jun 1 18:17:51 2010 From: h.meteo.shirazu at gmail.com (hossein lotfi) Date: Wed, 2 Jun 2010 02:47:51 +0430 Subject: [gradsusr] open multiple file in grads Message-ID: Hi all users I have a problem in opening multiple NetCDF files in gards for example I have 12 file such as ( ersst.197301.nc ..... ersst.197312.nc ) my descriptor file is DSET ^ersst.1973%m2.nc ====> or in another file : DSET ^ersst.1973%im2.nc OPTIONS template DTYPE netcdf TDEF 0 LINEAR 00Z15JAN1973 1mo I open this file with xdfopen command but I have this problem : Scanning Descriptor File: sst.ctl gadxdf error: Missing or invalid dimension size. --> The invalid description file record is: --> tdef 0 linear 00z15jan1973 1mo The data file was not opened. I attache one of this file for you can any one help me? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100602/3f0d46b5/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: ersst.197301.nc Type: application/x-netcdf Size: 99504 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100602/3f0d46b5/attachment-0001.nc From h.meteo.shirazu at gmail.com Tue Jun 1 18:31:09 2010 From: h.meteo.shirazu at gmail.com (hossein lotfi) Date: Wed, 2 Jun 2010 03:01:09 +0430 Subject: [gradsusr] open multiple file and SDFopen command Message-ID: Hi can we open multiple file with this method? ( http://www.wrcc.dri.edu/dri/softlib/grads/gradcomdsdfopen.html) I can only open 1 file from multiple files with this command : sdfopen ersst.197301.nc ersst.1973%m2.nc 12 I have 12 file with monthly sst data such as attached file at below can any one help me? thanks a lot -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100602/5e10e694/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: ersst.197301.nc Type: application/x-netcdf Size: 99504 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100602/5e10e694/attachment-0001.nc From mqvillafuerte at gmail.com Wed Jun 2 00:57:41 2010 From: mqvillafuerte at gmail.com (Marcelino II Villafuerte) Date: Wed, 2 Jun 2010 12:57:41 +0800 Subject: [gradsusr] how to find monthly sum from a ctl file while writing it as nc file using lats4d In-Reply-To: References: Message-ID: hi Waheed, 1. aphrodite daily precipitation data can be downloaded in a netcdf file format via: http://www.chikyu.ac.jp/precip/cgi-bin/aphrodite/script/aphrodite_cgi.cgi/register 2. I have attached a script which I used to produce a monthly average precipitation. you can modify it depending on your need. for example: you have to change "ave" with "sum" which in this case, can produce a monthly total rainfall. Note: I did not use looping to accommodate leap years. it works in GrADS 2.0 or later version because of sdfwrite command which can able to write your output to a netcdf file format. hope it helps. Mar On Tue, May 25, 2010 at 11:17 AM, Waheed wrote: > > > ---------- Forwarded message ---------- > From: Waheed > Date: Mon, May 24, 2010 at 5:18 PM > Subject: how to find monthly sum: when using lats4d > To: dasilva at alum.mit.edu > > > > hello > > dear i am converting daily precipitaion data (aphrodite) form 1961 to 2007 > from ctl type to nc(netcdf) type , i have done it but now i want to find the > monthly total from 1961-2007 using lats4d > but i am not understading how to do? > the script that i have wrtten is as : > > 'reinit' > 'open > data-aphd\APHRO_PAK_005deg_V0902.1961-2007/APHRO_PAK_005deg_V0902.ctl' > ti=1 > tf=ti+30 > y=1961 > while (y<=2007) > while (ti<=16832) > 'set t 'ti > 'lats4d -v -i > data-aphd\APHRO_PAK_005deg_V0902.1961-2007/APHRO_PAK_005deg_V0902.ctl > -ftype ctl -o waheed/JAN'y' -func sum(precip,t='ti',t='tf')' > ti=ti+365 > 'set t 'ti > 'q time' > say result > res=subwrd(result,3) > yf=substr(res,9,4) > if (y=yf) > ti=ti+1 > 'set t 'ti > endif > y=y+1 > endwhile > endwhile > > > > > any help > > > thanx in advance > > Regards > > > > > -- > waheed iqbal > (Meteorologist) > Pakistan Meteorological Department > R & D islamabad > +923334547814 > > > > -- > waheed iqbal > (Meteorologist) > Pakistan Meteorological Department > R & D islamabad > +923334547814 > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100602/7bd4bc85/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: aphrotomonthly.gs Type: application/octet-stream Size: 6026 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100602/7bd4bc85/attachment.obj From limxing at gmail.com Wed Jun 2 02:28:44 2010 From: limxing at gmail.com (Li M.X.) Date: Wed, 2 Jun 2010 14:28:44 +0800 Subject: [gradsusr] how can I get soil moisture from GRACE data Message-ID: how can I get soil moisture from GRACE data, any data set can be done and download ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100602/ad74edec/attachment.html From cellyn_lee53 at yahoo.com Wed Jun 2 13:04:12 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Wed, 2 Jun 2010 10:04:12 -0700 (PDT) Subject: [gradsusr] problem with 3D figure In-Reply-To: Message-ID: <861595.83109.qm@web55501.mail.re4.yahoo.com> Hi, ? thanks for your information, it helps me a alot. but i stil have a question, is it i should sdfopen the original .nc file, then only xdfopen the .ctl file?? ? Regards, cellyn --- On Tue, 1/6/10, Heiner K?rnich wrote: From: Heiner K?rnich Subject: Re: [gradsusr] problem with 3D figure To: "GrADS Users Forum" Date: Tuesday, 1 June, 2010, 4:27 AM Hi, this happens sometimes, when the netcdf file does not follow a certain standard. You have to create a small control-file and open the file with the commmand xdfopen. It is all well described in the GraDS documentation index under "xdfopen": http://grads.iges.org/grads/gadoc/gadocindex.html Regards, Heiner On Sun, May 30, 2010 at 5:24 PM, cellyn lee wrote: Hi?I met some problem in displaying 3D variables in GrADS. My netcdf file included 15 variables, some variables are 2D while some are 3D, when I type ?q file?, the Z size is 1, let?s say I have dep=15 in my 3D variables, so how I display the 3D variables where dep=12? Thanks for any information. _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Heiner K?rnich ? ? Dept. of Meteorology ? ? ? ? ? ?Tel: ?+46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se ? www.misu.su.se/~heiner/ -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100602/ffed5f21/attachment.html From mcroke at airdat.com Wed Jun 2 19:25:08 2010 From: mcroke at airdat.com (Meredith Croke) Date: Wed, 2 Jun 2010 19:25:08 -0400 Subject: [gradsusr] Cannot plot colorbar: no shading info Message-ID: <090531DCD6745B4E8B49300999500668038E9A0C@rdu-w2k3ex01.airdat.com> Hi Grads users, I'm trying to plot reflectivity over southwestern US and am having a problem plotting the colorbar. For some forecast hours the colorbar plots fine, but for other hours I get the message "cannot plot color bar: no shading information" basically it looks like when reflectivity is 0 across the entire region I get this message, however for consistency between forecast hours I would like all of the images to have the same colorbar placed on the image. I have the following set: 'set clevs 5 10 15 20 25 30 35 40 45 50 55 60' 'set ccols 55 41 42 43 44 45 46 47 48 49 50 51 52' 'set gxout shaded' 'set datawarn off' Does anyone have any work arounds for this so I can have the colorbar displayed even if all values in the grid are 0? Thanks in advance for your help. Meredith -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100602/8df5116a/attachment.html From thubuddar at gmail.com Thu Jun 3 01:11:01 2010 From: thubuddar at gmail.com (Queen thubuddar) Date: Thu, 3 Jun 2010 14:11:01 +0900 Subject: [gradsusr] how can I download Message-ID: Hello everyone, I want to use grads in window XP. But I cannot find grads for window. So, please tell me how to I install in windowXP. Thanks, SAW -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/447c6f85/attachment-0001.html From limxing at gmail.com Thu Jun 3 01:27:26 2010 From: limxing at gmail.com (Li M.X.) Date: Thu, 3 Jun 2010 13:27:26 +0800 Subject: [gradsusr] test Message-ID: test -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/7ae10565/attachment.html From anthony.luosan at gmail.com Thu Jun 3 01:54:01 2010 From: anthony.luosan at gmail.com (san luo) Date: Thu, 3 Jun 2010 13:54:01 +0800 Subject: [gradsusr] eof Message-ID: Hello, everyone! who has a EOF fortran program?please give me a hand! From heiner at misu.su.se Thu Jun 3 02:59:04 2010 From: heiner at misu.su.se (=?ISO-8859-1?Q?Heiner_K=F6rnich?=) Date: Thu, 3 Jun 2010 08:59:04 +0200 Subject: [gradsusr] problem with 3D figure In-Reply-To: <861595.83109.qm@web55501.mail.re4.yahoo.com> References: <861595.83109.qm@web55501.mail.re4.yahoo.com> Message-ID: Hi, only open the .ctl-file with xdfopen. The ctl-file should contain something like: DSET data.nc ZDEF dep 12 linear 1 1 This would mean that your height variable is called "dep" in the .nc-file. Check it with 'ncdump -h data.nc'. For the level definition the example uses only linear distributed levels, you might want to put their actual levels. Since you have mentioned that your file contains both 2d and 3d data, you might need to add this as a "VARS"-statement in the ctl-file. But try with out. So far, Heiner On Wed, Jun 2, 2010 at 7:04 PM, cellyn lee wrote: > Hi, > > thanks for your information, it helps me a alot. but i stil have a > question, is it i should sdfopen the original .nc file, then only xdfopen > the .ctl file?? > > Regards, > cellyn > > > --- On *Tue, 1/6/10, Heiner K?rnich * wrote: > > > From: Heiner K?rnich > Subject: Re: [gradsusr] problem with 3D figure > To: "GrADS Users Forum" > Date: Tuesday, 1 June, 2010, 4:27 AM > > > Hi, > > this happens sometimes, when the netcdf file does not follow a certain > standard. You have to create a small control-file and open the file with the > commmand xdfopen. > It is all well described in the GraDS documentation index under "xdfopen": > http://grads.iges.org/grads/gadoc/gadocindex.html > > Regards, > Heiner > > On Sun, May 30, 2010 at 5:24 PM, cellyn lee > > wrote: > >> Hi?I met some problem in displaying 3D variables in GrADS. My netcdf >> file included 15 variables, some variables are 2D while some are 3D, when I >> type ?q file?, the Z size is 1, let?s say I have dep=15 in my 3D variables, >> so how I display the 3D variables where dep=12? >> > Thanks for any information. > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > > > > -- > Heiner K?rnich > Dept. of Meteorology Tel: +46 8 164333 > Stockholms University, SE-106 91 Stockholm, Sweden > Email: heiner at misu.su.se > www.misu.su.se/~heiner/ > > -----Inline Attachment Follows----- > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- Heiner K?rnich Dept. of Meteorology Tel: +46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se www.misu.su.se/~heiner/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/10922968/attachment.html From cellyn_lee53 at yahoo.com Thu Jun 3 03:44:31 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Thu, 3 Jun 2010 00:44:31 -0700 (PDT) Subject: [gradsusr] problem with 3D figure In-Reply-To: Message-ID: <547067.79626.qm@web55506.mail.re4.yahoo.com> Hi, ? I? solved my problem already with your guide, thank you very much!! I done it without the VARS statement. thanks again. ? Regrads, Cellyn --- On Thu, 3/6/10, Heiner K?rnich wrote: From: Heiner K?rnich Subject: Re: [gradsusr] problem with 3D figure To: "GrADS Users Forum" Date: Thursday, 3 June, 2010, 2:59 PM Hi, only open the .ctl-file with xdfopen. The ctl-file should contain something like: DSET data.nc ZDEF dep 12 linear 1 1 This would mean that your height variable is called "dep" in the .nc-file. Check it with 'ncdump -h data.nc'. For the level definition the example uses only linear distributed levels, you might want to put their actual levels. Since you have mentioned that your file contains both 2d and 3d data, you might need to add this as a "VARS"-statement in the ctl-file. But try with out. So far, Heiner On Wed, Jun 2, 2010 at 7:04 PM, cellyn lee wrote: Hi, ? thanks for your information, it helps me a alot. but i stil have a question, is it i should sdfopen the original .nc file, then only xdfopen the .ctl file?? ? Regards, cellyn --- On Tue, 1/6/10, Heiner K?rnich wrote: From: Heiner K?rnich Subject: Re: [gradsusr] problem with 3D figure To: "GrADS Users Forum" Date: Tuesday, 1 June, 2010, 4:27 AM Hi, this happens sometimes, when the netcdf file does not follow a certain standard. You have to create a small control-file and open the file with the commmand xdfopen. It is all well described in the GraDS documentation index under "xdfopen": http://grads.iges.org/grads/gadoc/gadocindex.html Regards, Heiner On Sun, May 30, 2010 at 5:24 PM, cellyn lee wrote: Hi?I met some problem in displaying 3D variables in GrADS. My netcdf file included 15 variables, some variables are 2D while some are 3D, when I type ?q file?, the Z size is 1, let?s say I have dep=15 in my 3D variables, so how I display the 3D variables where dep=12? Thanks for any information. _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Heiner K?rnich ? ? Dept. of Meteorology ? ? ? ? ? ?Tel: ?+46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se ? www.misu.su.se/~heiner/ -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Heiner K?rnich ? ? Dept. of Meteorology ? ? ? ? ? ?Tel: ?+46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se ? www.misu.su.se/~heiner/ -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/534e9117/attachment.html From cellyn_lee53 at yahoo.com Thu Jun 3 04:59:31 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Thu, 3 Jun 2010 01:59:31 -0700 (PDT) Subject: [gradsusr] combine multiple netcdf file Message-ID: <51977.29688.qm@web55507.mail.re4.yahoo.com> Hi, ? i have a question about how to combine multiple netcdf files into one netcdf file? For example, i have 20 seperate netcdf files which contain 5 days data each, i want to combine all 20 files into one netcdf file to easier my job. Anybody got any idea about this problem please kindly help me, thanks!!! ? Regrads, Cellyn -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/80b46933/attachment.html From heiner at misu.su.se Thu Jun 3 05:27:47 2010 From: heiner at misu.su.se (=?ISO-8859-1?Q?Heiner_K=F6rnich?=) Date: Thu, 3 Jun 2010 11:27:47 +0200 Subject: [gradsusr] combine multiple netcdf file In-Reply-To: <51977.29688.qm@web55507.mail.re4.yahoo.com> References: <51977.29688.qm@web55507.mail.re4.yahoo.com> Message-ID: HI Cellyn, you can use the NCO library with its command ncrcat or you use the CDO (climate data operators) with its command "cdo cat" Both packages are available on the internet and are very useful when working with netcdf-files. Regards, Heiner On Thu, Jun 3, 2010 at 10:59 AM, cellyn lee wrote: > Hi, > > i have a question about how to combine multiple netcdf files into one > netcdf file? > For example, i have 20 seperate netcdf files which contain 5 days data > each, i want to combine all 20 files into one netcdf file to easier my job. > Anybody got any idea about this problem please kindly help me, thanks!!! > > Regrads, > Cellyn > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- Heiner K?rnich Dept. of Meteorology Tel: +46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se www.misu.su.se/~heiner/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/c50d8ec9/attachment-0001.html From krishmet at gmail.com Thu Jun 3 07:07:58 2010 From: krishmet at gmail.com (krishnamohan) Date: Thu, 3 Jun 2010 16:37:58 +0530 Subject: [gradsusr] eof In-Reply-To: References: Message-ID: hai san, You can do eof in grads itself. The program is available form http://www.atmos.ucla.edu/~munnich/Grads/EOF/ regards -- Krishnamohan.K.S Junior Research Fellow Department Of Atmospheric Sciences Cochin University of Science and Technology Cochin,India On Thu, Jun 3, 2010 at 11:24 AM, san luo wrote: > Hello, everyone! who has a EOF fortran program?please give me a hand! > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/a271d983/attachment.html From cellyn_lee53 at yahoo.com Thu Jun 3 08:17:07 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Thu, 3 Jun 2010 05:17:07 -0700 (PDT) Subject: [gradsusr] combine multiple netcdf file In-Reply-To: Message-ID: <1174.21733.qm@web55501.mail.re4.yahoo.com> Hi, ? thanks for your reply, i downloaded the NCO library already and i saw a command ncecat, is it also use for combine multiple files? so what is the difference between ncecat and ncrcat?? after i combine, how can i know my data arrange properly follows the sequence of days?? ? Regards, Cellyn --- On Thu, 3/6/10, Heiner K?rnich wrote: From: Heiner K?rnich Subject: Re: [gradsusr] combine multiple netcdf file To: "GrADS Users Forum" Date: Thursday, 3 June, 2010, 5:27 PM HI Cellyn, you can use the NCO library with its command ncrcat or you use the CDO (climate data operators) with its command "cdo cat" Both packages are available on the internet and are very useful when working with netcdf-files. Regards, Heiner On Thu, Jun 3, 2010 at 10:59 AM, cellyn lee wrote: Hi, ? i have a question about how to combine multiple netcdf files into one netcdf file? For example, i have 20 seperate netcdf files which contain 5 days data each, i want to combine all 20 files into one netcdf file to easier my job. Anybody got any idea about this problem please kindly help me, thanks!!! ? Regrads, Cellyn _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Heiner K?rnich ? ? Dept. of Meteorology ? ? ? ? ? ?Tel: ?+46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se ? www.misu.su.se/~heiner/ -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/c5d49111/attachment.html From heiner at misu.su.se Thu Jun 3 08:42:02 2010 From: heiner at misu.su.se (=?ISO-8859-1?Q?Heiner_K=F6rnich?=) Date: Thu, 3 Jun 2010 14:42:02 +0200 Subject: [gradsusr] combine multiple netcdf file In-Reply-To: <1174.21733.qm@web55501.mail.re4.yahoo.com> References: <1174.21733.qm@web55501.mail.re4.yahoo.com> Message-ID: Hi, I don't know. Look here: http://nco.sourceforge.net/nco.html#SEC17 The issue with the days should probably work, if your data has the right time stamp in each file. Just test it. Good luck, Heiner On Thu, Jun 3, 2010 at 2:17 PM, cellyn lee wrote: > Hi, > > thanks for your reply, i downloaded the NCO library already and i saw a > command ncecat, is it also use for combine multiple files? so what is the > difference between ncecat and ncrcat?? > after i combine, how can i know my data arrange properly follows the > sequence of days?? > > Regards, > Cellyn > > --- On *Thu, 3/6/10, Heiner K?rnich * wrote: > > > From: Heiner K?rnich > Subject: Re: [gradsusr] combine multiple netcdf file > To: "GrADS Users Forum" > Date: Thursday, 3 June, 2010, 5:27 PM > > > HI Cellyn, > > you can use the NCO library with its command ncrcat > or you use the CDO (climate data operators) with its command "cdo cat" > > Both packages are available on the internet and are very useful when > working with netcdf-files. > > Regards, > Heiner > > On Thu, Jun 3, 2010 at 10:59 AM, cellyn lee > > wrote: > >> Hi, >> >> i have a question about how to combine multiple netcdf files into one >> netcdf file? >> For example, i have 20 seperate netcdf files which contain 5 days data >> each, i want to combine all 20 files into one netcdf file to easier my job. >> Anybody got any idea about this problem please kindly help me, thanks!!! >> >> Regrads, >> Cellyn >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr >> >> > > > -- > Heiner K?rnich > Dept. of Meteorology Tel: +46 8 164333 > Stockholms University, SE-106 91 Stockholm, Sweden > Email: heiner at misu.su.se > www.misu.su.se/~heiner/ > > -----Inline Attachment Follows----- > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- Heiner K?rnich Dept. of Meteorology Tel: +46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se www.misu.su.se/~heiner/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/851241bf/attachment.html From krlosbatist at gmail.com Thu Jun 3 09:03:41 2010 From: krlosbatist at gmail.com (Carlos Batista) Date: Thu, 3 Jun 2010 10:03:41 -0300 Subject: [gradsusr] help last4d Message-ID: Hello how are you? I need help to understand the workings of last4d.gs ... Will be if someone could help me with a manual or book of this tool? I know the potential of last4d from what I read on the site, but not very well understood. Could anyone help me please? Carlos -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/fa7d4cb1/attachment.html From cellyn_lee53 at yahoo.com Thu Jun 3 09:26:59 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Thu, 3 Jun 2010 06:26:59 -0700 (PDT) Subject: [gradsusr] combine multiple netcdf file In-Reply-To: Message-ID: <165549.72419.qm@web55504.mail.re4.yahoo.com> hi, ? okay...thanks again for your information, you helps me a lot in my?netcdf problem!! I gained some idea through those information given. thanks. ? Regards,? Cellyn? --- On Thu, 3/6/10, Heiner K?rnich wrote: From: Heiner K?rnich Subject: Re: [gradsusr] combine multiple netcdf file To: "GrADS Users Forum" Date: Thursday, 3 June, 2010, 8:42 PM Hi, I don't know. Look here: http://nco.sourceforge.net/nco.html#SEC17 The issue with the days should probably work, if your data has the right time stamp in each file. Just test it. Good luck, Heiner On Thu, Jun 3, 2010 at 2:17 PM, cellyn lee wrote: Hi, ? thanks for your reply, i downloaded the NCO library already and i saw a command ncecat, is it also use for combine multiple files? so what is the difference between ncecat and ncrcat?? after i combine, how can i know my data arrange properly follows the sequence of days?? ? Regards, Cellyn --- On Thu, 3/6/10, Heiner K?rnich wrote: From: Heiner K?rnich Subject: Re: [gradsusr] combine multiple netcdf file To: "GrADS Users Forum" Date: Thursday, 3 June, 2010, 5:27 PM HI Cellyn, you can use the NCO library with its command ncrcat or you use the CDO (climate data operators) with its command "cdo cat" Both packages are available on the internet and are very useful when working with netcdf-files. Regards, Heiner On Thu, Jun 3, 2010 at 10:59 AM, cellyn lee wrote: Hi, ? i have a question about how to combine multiple netcdf files into one netcdf file? For example, i have 20 seperate netcdf files which contain 5 days data each, i want to combine all 20 files into one netcdf file to easier my job. Anybody got any idea about this problem please kindly help me, thanks!!! ? Regrads, Cellyn _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Heiner K?rnich ? ? Dept. of Meteorology ? ? ? ? ? ?Tel: ?+46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se ? www.misu.su.se/~heiner/ -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Heiner K?rnich ? ? Dept. of Meteorology ? ? ? ? ? ?Tel: ?+46 8 164333 Stockholms University, SE-106 91 Stockholm, Sweden Email: heiner at misu.su.se ? www.misu.su.se/~heiner/ -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/d4840a6f/attachment-0001.html From arubawx at setarnet.aw Thu Jun 3 09:31:01 2010 From: arubawx at setarnet.aw (Marck Oduber) Date: Thu, 3 Jun 2010 13:31:01 -0000 Subject: [gradsusr] how can I download References: Message-ID: <00de01cb0321$026fda40$0e00a8c0@forecaster> Your best bet is to use opengrads ..especially if your a beginner... http://opengrads.org/wiki/index.php?title=Installing_GrADS_v2.0_on_Microsoft_Windows#Downloading_the_software marck ----- Original Message ----- From: Queen thubuddar To: gradsusr at gradsusr.org Sent: Thursday, June 03, 2010 05:11 Subject: [gradsusr] how can I download Hello everyone, I want to use grads in window XP. But I cannot find grads for window. So, please tell me how to I install in windowXP. Thanks, SAW ------------------------------------------------------------------------------ _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release Date: 06/03/10 06:25:00 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/e3120de8/attachment.html From huber.gilt at igp.gob.pe Thu Jun 3 13:15:14 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Thu, 3 Jun 2010 12:15:14 -0500 Subject: [gradsusr] enable netcdf options in grads 2.0 Message-ID: <201006031722.o53HMWJn013118@geo.igp.gob.pe> Hello, http://iges.org/grads/gadoc/supplibs After I compiled the netcdf libraries in this link, throw an libnetcdf.a library, and tried to configure these libraries for grads compilation with this command : CC='gcc -mlp64 -L/home/huber/grads/supplibs/lib -lreadline -lgeotiff -lhdf5 -lnetcdf' ./configure --prefix=/opt/grads-2.0.a8 But did not enable grads, How can I enable the netcdf library? +-------------------------------+ | | | GrADS will be built with: | | | | - GUI disabled | | + readline enabled | | - geotiff disabled | | - shapefile disabled | | - printim disabled | | - grib2 disabled | | - hdf4 disabled | | + hdf5 enabled | | - netcdf disabled | | - OPeNDAP disabled | | | | gxtran will not be built | | grib2scan will not be built | | | +-------------------------------+ configure: creating src/VERSION configure: creating src/buildinfo.h configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/config.h config.status: src/config.h is unchanged Run 'make && make install' to build GrADS. Executables will be installed to bin/ in current dir, unless prefix was specified. Please help me, Best regards, Huber Gilt Lopez IGP -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100603/5bcaf77f/attachment.html From anthony.luosan at gmail.com Thu Jun 3 23:17:25 2010 From: anthony.luosan at gmail.com (san luo) Date: Fri, 4 Jun 2010 11:17:25 +0800 Subject: [gradsusr] eof In-Reply-To: References: Message-ID: Dear krishnamohan, Thanks for your help.It is very useful to me . Best wishes San From me at j0nes.de Fri Jun 4 11:01:01 2010 From: me at j0nes.de (Jonas Kaufmann) Date: Fri, 4 Jun 2010 17:01:01 +0200 Subject: [gradsusr] Appending to file Message-ID: Hello, I have a grads script that basically looks like this: 'set lat 54.10' 'set lon 10.28' 'set t 1 78' 'set gxout print' 'set prnopts %0.2f 78 1' 'd rh2m' 'd tmp2m' dummy=write('output.txt',result) The file output.txt gets created and contains a single line of 78 values. However, I would like to have two lines in there, one for the variable rh2m and the other for tmp2m. Do you know if this is possible and if so, what do I have to do? Best regards, Jonas Kaufmann From r.hachelaf at gmail.com Fri Jun 4 13:01:15 2010 From: r.hachelaf at gmail.com (hachelaf rabah) Date: Fri, 4 Jun 2010 18:01:15 +0100 Subject: [gradsusr] plot and read prepbufr file with grads Message-ID: Hello, i need help to plot some parameters like presseure, temperature or precipitations in a map or in ascii file with grads. in attached file please find my bufr descriptor file or bellow : ============================== ========================== dset /home/cnpm/cwordshb/prepbufr.in undef 9.999E+20 title prepbufr.in dtype bufr TDEF 1 linear 06z23may2010 1hr STID 1,194 XVAR 6,240 YVAR 5,2 VARS 8 slon 0 06,240 LONGITUDE slat 0 05,002 LATITUDE STAT 0 01,194 Station id POB 0 07,245 PRESSURE OBSERVATION TOB 0 12,245 TEMPERATURE OBSERVATION TP24 0 13,023 TOTAL PRECIPITATION PAST 24 HOURS UOB 0 11,003 U-COMPONENT WIND OBSERVATION VOB 0 11,004 V-COMPONENT WIND OBSERVATION ENDVARS ================================================================= when i type "d STAT" or "d slon" i can see values in gradsc interface but when i type" d pob "or "d uob" i can'nt see any think . knowing thant i respect values of each parameter from the header file. Thank you for help . -- Cordialement, Best regards, Rabah Hachelaf ______ ( ) ( ) (________) ///////// -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100604/ab95bd37/attachment.html From Phil.Cogbill at noaa.gov Fri Jun 4 14:54:08 2010 From: Phil.Cogbill at noaa.gov (Phil Cogbill) Date: Fri, 04 Jun 2010 14:54:08 -0400 Subject: [gradsusr] undef in GrADS 2 Message-ID: <4C094BD0.9080906@noaa.gov> I am having a problem with GrADS not honoring the undef value in the control files and instead use -9.99e8 rather than 9.999e20. This has just recently come about when we upgraded to GrADS 2. Do I need to add to my control file something for this to work? Thanks! Phil From jma at cola.iges.org Fri Jun 4 15:04:13 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Fri, 4 Jun 2010 15:04:13 -0400 Subject: [gradsusr] undef in GrADS 2 In-Reply-To: <4C094BD0.9080906@noaa.gov> References: <4C094BD0.9080906@noaa.gov> Message-ID: Hi, Phil -- Undef handling was changed in version 2.0.a6. Please use the 'set undef' command to set the undef value for all GrADS display and output. The changelog has the notification of this change http://iges.org/grads/changelog-2.0.txt . Please also look at the documentation: http://iges.org/grads/gadoc/gradcomdsetundef.html Search the archives for "set undef" and you'll find more posts about this. --Jennifer On Jun 4, 2010, at 2:54 PM, Phil Cogbill wrote: > I am having a problem with GrADS not honoring the undef value in the > control files and instead use -9.99e8 rather than 9.999e20. This has > just recently come about when we upgraded to GrADS 2. Do I need to > add > to my control file something for this to work? > > Thanks! > Phil > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100604/686f5089/attachment-0001.html From ela at cola.iges.org Fri Jun 4 15:34:00 2010 From: ela at cola.iges.org (Eric Altshuler) Date: Fri, 4 Jun 2010 15:34:00 -0400 (EDT) Subject: [gradsusr] Appending to file In-Reply-To: <939404895.4161.1275679957307.JavaMail.root@mail.iges.org> Message-ID: <1996653809.4163.1275680040132.JavaMail.root@mail.iges.org> Jonas, The way your script is written, only the tmp2m values will be in the output file. You need an additional write statement immediately following 'd rh2m': 'd rh2m' dummy=write('output.txt',result) 'd tmp2m' dummy=write('output.txt',result) Best regards, Eric L. Altshuler Assistant Research Scientist Center for Ocean-Land-Atmosphere Studies 4041 Powder Mill Road, Suite 302 Calverton, MD 20705-3106 USA E-mail: ela at cola.iges.org Phone: (301) 902-1257 Fax: (301) 595-9793 ----- Original Message ----- From: "Jonas Kaufmann" To: "GrADS Users Forum" Sent: Friday, June 4, 2010 11:01:01 AM Subject: [gradsusr] Appending to file Hello, I have a grads script that basically looks like this: 'set lat 54.10' 'set lon 10.28' 'set t 1 78' 'set gxout print' 'set prnopts %0.2f 78 1' 'd rh2m' 'd tmp2m' dummy=write('output.txt',result) The file output.txt gets created and contains a single line of 78 values. However, I would like to have two lines in there, one for the variable rh2m and the other for tmp2m. Do you know if this is possible and if so, what do I have to do? Best regards, Jonas Kaufmann _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr From Phil.Cogbill at noaa.gov Fri Jun 4 15:58:34 2010 From: Phil.Cogbill at noaa.gov (Phil Cogbill) Date: Fri, 04 Jun 2010 15:58:34 -0400 Subject: [gradsusr] undef in GrADS 2 In-Reply-To: References: <4C094BD0.9080906@noaa.gov> Message-ID: <4C095AEA.6090300@noaa.gov> Thanks Jennifer! I read about this some more and that worked _great_ in GrADS 2, but what about GDS 2? I am still seeing this problem coming from GDS 2 and it is causing problems for other software that uses the GDS2 service. I've looked through the configuration reference for GDS, but do not see a way to set undef. Any ideas? Phil Jennifer Adams wrote: > Hi, Phil -- > Undef handling was changed in version 2.0.a6. Please use the 'set > undef' command to set the undef value for all GrADS display and output. > The changelog has the notification of this > change http://iges.org/grads/changelog-2.0.txt . > Please also look at the > documentation: http://iges.org/grads/gadoc/gradcomdsetundef.html > Search the archives for "set undef" and you'll find more posts about > this. > --Jennifer > > > On Jun 4, 2010, at 2:54 PM, Phil Cogbill wrote: > >> I am having a problem with GrADS not honoring the undef value in the >> control files and instead use -9.99e8 rather than 9.999e20. This has >> just recently come about when we upgraded to GrADS 2. Do I need to add >> to my control file something for this to work? >> >> Thanks! >> Phil >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > ------------------------------------------------------------------------ > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100604/7bc15b2d/attachment.html From ldong at unm.edu Fri Jun 4 17:34:18 2010 From: ldong at unm.edu (Li Dong) Date: Fri, 04 Jun 2010 15:34:18 -0600 Subject: [gradsusr] how to calculate mass-weighted mean? In-Reply-To: References: <4C094BD0.9080906@noaa.gov> Message-ID: <1275687258.21915.14.camel@dogen.unm.edu> Hi all, I need to calculate mass-weighted mean temperature within the troposphere (1000mb~200mb). Can anyone advise me if there is a way to do it by GrADS? Thanks. Li From jma at cola.iges.org Fri Jun 4 17:44:23 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Fri, 4 Jun 2010 17:44:23 -0400 Subject: [gradsusr] undef in GrADS 2 In-Reply-To: <4C095AEA.6090300@noaa.gov> References: <4C094BD0.9080906@noaa.gov> <4C095AEA.6090300@noaa.gov> Message-ID: <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> Yes, this does also affect the GDS. Here's the scoop from the GDS home page: Important Note for GDS Administrators (June 2009): The recent release of GrADS (version 2.0.a6) implemented some necessary changes related to the handling of undefined values. These changes can affect the GDS. If you are administering a GDS version 2.0 with GrADS 2.0.a6 behind it, then a 1-line patch is needed for the file $GDSHOME/scripts/ subset.gs. The patched version is here. Updating the subset.gs script does not require a reinstallation or even a reload of your GDS. In case the link doesn't work, the patched version is http://iges.org/grads/gds/patched_subset.gs --Jennifer On Jun 4, 2010, at 3:58 PM, Phil Cogbill wrote: > Thanks Jennifer! > > I read about this some more and that worked great in GrADS 2, but > what about GDS 2? I am still seeing this problem coming from GDS 2 > and it is causing problems for other software that uses the GDS2 > service. I've looked through the configuration reference for GDS, > but do not see a way to set undef. Any ideas? > > Phil > > > Jennifer Adams wrote: >> >> Hi, Phil -- >> Undef handling was changed in version 2.0.a6. Please use the 'set >> undef' command to set the undef value for all GrADS display and >> output. >> The changelog has the notification of this change http://iges.org/grads/changelog-2.0.txt >> . >> Please also look at the documentation: http://iges.org/grads/gadoc/gradcomdsetundef.html >> Search the archives for "set undef" and you'll find more posts >> about this. >> --Jennifer >> >> >> On Jun 4, 2010, at 2:54 PM, Phil Cogbill wrote: >> >>> I am having a problem with GrADS not honoring the undef value in the >>> control files and instead use -9.99e8 rather than 9.999e20. This >>> has >>> just recently come about when we upgraded to GrADS 2. Do I need >>> to add >>> to my control file something for this to work? >>> >>> Thanks! >>> Phil >>> >>> >>> _______________________________________________ >>> gradsusr mailing list >>> gradsusr at gradsusr.org >>> http://gradsusr.org/mailman/listinfo/gradsusr >> >> -- >> Jennifer M. Adams >> IGES/COLA >> 4041 Powder Mill Road, Suite 302 >> Calverton, MD 20705 >> jma at cola.iges.org >> >> >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr >> > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100604/3e5f1bac/attachment.html From klevey at customweather.com Fri Jun 4 23:54:53 2010 From: klevey at customweather.com (Kevin M Levey) Date: Fri, 4 Jun 2010 20:54:53 -0700 Subject: [gradsusr] Updated GFS forecast hours 183-192 information and tips on making sure the data plots correctly. In-Reply-To: <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> References: <4C094BD0.9080906@noaa.gov> <4C095AEA.6090300@noaa.gov> <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> Message-ID: <4224414A-6C70-43F4-A93C-CEEE69DFD929@customweather.com> FRI 04JUN10: 2045PDT Dear Grads Users On 2 APR 2010, NCEP announced the addition of forecast hours to the GFS GRIB2 data set - in essence, extending the high resolution data from 180hrs to 192, every 3 hours. See the official note below. While testing the data, I noticed that my data was not being mapped corrected by GRADS, so I made sure I updated both g2ctl.pl (version 0.0.4o) AND wgrib2 to the absolute latest version (1.8.4). Once I had done that, the data was mapped correctly by wgrib2 and the plots in GRADS were as expected. I thought I'd pass on this information so that you don't spend hours wondering what's wrong as everything processes just fine with older versions with no warning messages, but the data is totally incorrectly mapped by wgrib2/g2ctl. Here is the offical wgrib2 page: http://www.cpc.noaa.gov/products/wesley/wgrib2/index.html Go to the following page to get g2ctl.pl: http://www.cpc.noaa.gov/products/wesley/g2ctl.html and here for the latest source code for wgrib2 : ftp://ftp.cpc.ncep.noaa.gov/wd51we/wgrib2/ Also, for those of you plotting beyond hour 192 (high resolution) you may want to consider using the GFS Ensemble control run data which has forecasts every 6 hours out to 384 hours and the resolution is 1x1 degrees - this as opposed to the regular GFS which is only every 12hours at 2.5x2.5 degrees. Here is the official note from NCEP: >> 86 >> NOUS41 KWBC 021253 >> PNSWSH >> >> TECHNICAL IMPLEMENTATION NOTICE 10-15 >> NATIONAL WEATHER SERVICE HEADQUARTERS WASHINGTON DC >> 853 AM EDT FRI APR 2 2010 >> >> TO: SUBSCRIBERS: >> -FAMILY OF SERVICES >> -NOAA WEATHER WIRE SERVICE >> -EMERGENCY MANAGERS WEATHER INFORMATION NETWORK >> -NOAAPORT >> OTHER NWS PARTNERS...USERS AND EMPLOYEES >> >> FROM: TIMOTHY MCCLUNG >> SCIENCE PLANS BRANCH CHIEF >> OFFICE OF SCIENCE AND TECHNOLOGY >> >> SUBJECT: GLOBAL FORECAST SYSTEM CHANGES: >> EFFECTIVE JUNE 22 2010. >> >> EFFECTIVE JUNE 22 2010...BEGINNING WITH THE 1200 COORDINATED >> UNIVERSAL TIME /UTC/ RUN...THE NATIONAL CENTERS FOR >> ENVIRONMENTAL PREDICTION /NCEP/ WILL UPGRADE THE GLOBAL >> FORECAST SYSTEM /GFS/. THE RESOLUTION OF THE GLOBAL FORECAST >> MODEL WILL BE INCREASED FROM T382 /35 KM/ TO T574 /27 KM/. >> THE HIGH RESOLUTION PORTION OF THE FORECAST WILL BE EXTENDED >> FROM 180 HRS TO 192 HRS. WITH THIS EXTENSION 3 HOURLY OUTPUT >> WILL BE MADE AVAILABLE OUT TO 192 HOURS. >> >> THIS WILL RESULT IN SIGNIFICANT CHANGES IN THE DEFINITION OF >> PARAMETERS IN THE 192 HOUR PRESSURE GRIB /PGRB/ AND FLUX >> FILES. THERE WILL ALSO BE SIGNIFICANT CHANGES IN MODEL >> PHYSICS ASSOCIATED WITH THIS CHANGE. IN ADDITION >> MODIFICATIONS WILL BE MADE TO THE CONTENTS OF THE GLOBAL DATA >> ASSIMILATION SYSTEM /GDAS/ AND GFS PGRB FILES. >> >> CHANGES IN MODEL PHYSICS INCLUDE: >> >> RADIATION AND CLOUD OVERLAP >> GRAVITY WAVE DRAG >> HURRICANE RELOCATION >> NEW PLANETARY BOUNDARY LAYER SCHEME >> NEW MASS FLUX SHALLOW CONVECTION >> UPDATED DEEP CONVECTION SCHEME >> POSITIVE DEFINITE TRACER TRANSPORT SCHEME >> >> THE NEW PARAMETER FOR THE GFS FORECAST PRESSURE GRIB >> FILES IS: >> >> MAX WIND GUST >> >> SEVERAL PARAMETERS ARE BEING DELETED FROM THE GDAS ANALYSIS >> PRESSURE GRIB FILES BECAUSE THEY ARE NOT VALID FOR THE >> ANALYSIS DATASET AND HAVE NEVER PROVIDED PERTINENT >> INFORMATION. THESE INCLUDE: >> >> 4 PRECIPITATION TYPES >> CONVECTIVE PRECIPITATION RATE >> LAND SEA MASK >> LATENT HEAT FLUX >> SENSIBLE HEAT FLUX >> PRECIPITATION RATE >> 2M RH >> 2M SPECIFIC HUMIDITY >> 2M TEMPERATURE >> BOUNDARY LAYER CLOUD COVER >> LOW CLOUD COVER >> CONVECTIVE CLOUD COVER >> SKIN TEMPERATURE >> SURFACE UPWARD LONG WAVE FLUX >> SURFACE UPWARD SHORT WAVE FLUX HELICITY >> >> THESE PARAMETERS ARE BEING DELETED FROM THE GLOBAL FORECAST >> MODEL SIMULATED GOES GRIB FILE BECAUSE THEY WERE INCLUDED IN >> ERROR. THESE FIELDS ARE AVAILABLE IN THE PGRB FILES: >> >> MEAN SEA LEVEL PRESSURE >> WAVE-5 GEOPOTENTIAL HEIGHT >> >> ALL ACCUMULATED OR AVERAGED VALUES IN THE 192 HOUR PGRB >> AND FLUX FILES WILL NOW BE OVER A 6 HOUR PERIOD INSTEAD OF >> 12 HOURS. THE FORMAT AND CONTENT OF THE 3 HOURLY FILES FROM >> 180 TO 192 HOURS WILL BE THE SAME AS THE FILES FROM 0 TO 180. >> FOR THE FLUX FILE...THIS INCLUDES THE MAJORITY OF THE >> PARAMETERS IN THE FILE. PARAMETERS CHANGING IN THE PGRB >> FILE ARE: >> >> 2 M ABOVE GROUND MAX. TEMPERATURE >> 2 M ABOVE GROUND MIN. TEMPERATURE >> SURFACE ALBEDO >> SURFACE CLEAR SKY UV-B DOWNWARD SOLAR FLUX >> SURFACE CATEGORICAL FREEZING RAIN >> SURFACE CATEGORICAL ICE PELLETS >> SURFACE CONVECTIVE PRECIPITATION RATE >> SURFACE CATEGORICAL RAIN >> SURFACE CATEGORICAL SNOW >> ATMOSPHERIC COLUMN CLOUD WORK FUNCTION >> SURFACE DOWNWARD LONG WAVE FLUX >> SURFACE DOWNWARD SHORT WAVE FLUX >> SURFACE UV-B DOWNWARD SOLAR FLUX >> SURFACE GROUND HEAT FLUX >> SURFACE LATENT HEAT FLUX >> SURFACE PRECIPITATION RATE >> LOW CLOUD BASE PRESSURE >> LOW CLOUD TOP PRESSURE >> MID-CLOUD BASE PRESSURE >> MID-CLOUD TOP PRESSURE >> HIGH CLOUD BASE PRESSURE >> HIGH CLOUD TOP PRESSURE >> SURFACE SENSIBLE HEAT FLUX >> ATMOSPHERIC COLUMN TOTAL CLOUD COVER >> BOUNDARY CLOUD LAYER TOTAL CLOUD COVER >> LOW CLOUD COVER >> MID-CLOUD COVER >> HIGH CLOUD COVER >> LOW CLOUD TOP TEMPERATURE >> MID-CLOUD TOP TEMPERATURE >> HIGH CLOUD TOP TEMPERATURE >> SURFACE ZONAL GRAVITY WAVE STRESS >> SURFACE ZONAL MOMENTUM FLUX >> SURFACE UPWARD LONG WAVE FLUX >> TOP OF ATMOSPHERE UPWARD LONG WAVE FLUX >> SURFACE UPWARD SHORT WAVE FLUX >> TOP OF ATMOSPHERE UPWARD SHORT WAVE FLUX >> SURFACE MERIDIONAL GRAVITY WAVE STRESS >> SURFACE MERIDIONAL MOMENTUM FLUX >> SURFACE CONVECTIVE PRECIPITATION >> SURFACE TOTAL PRECIPITATION >> SURFACE LARGE SCALE PRECIPITATION >> >> NOTE THAT FOR THE 192 HR PGRB PRODUCTS AVAILABLE ON NOAAPORT >> AND IN AWIPS THE ACCUMULATIONS AND AVERAGES WILL REMAIN OVER >> THE PREVIOUS 12 HOUR PERIOD UNTIL AWIPS IS MODIFIED TO >> ACCOMMODATE THIS CHANGE. >> >> THE FORMAT OF THE HALF AND ONE DEGREE PRESSURE GRIB FILES >> WILL REMAIN THE SAME EXCEPT FOR THE CHANGES IN VARIABLES >> LISTED ABOVE. THE SIZE OF THESE FILES WILL NOT CHANGE >> SIGNIFICANTLY. WITH THE INCREASE IN MODEL RESOLUTION... THE >> SIZE OF THE SIGMA COEFFICIENT FILES AND THE SURFACE FLUX >> FILES WILL INCREASE SIGNIFICANTLY. >> >> THESE CONTENT CHANGES WILL IMPACT ALL DISSEMINATION ROUTES: >> NWS PUBLIC FTP SERVER...THE NCEP PUBLIC FTP SERVER...AND >> NOAAPORT. >> >> A SET OF TEST DATA IS AVAILABLE AT /USE LOWERCASE/ EXCEPT FOR >> GFS AND T574L64: >> >> FTP.EMC.NCEP.NOAA.GOV/GC_WMB/WX24FY/GFS_T574L64/GFS.20091217 >> >> A CONSISTENT PARALLEL FEED OF DATA WILL BECOME AVAILABLE ON >> THE NCEP FTP SERVER ONCE THE MODEL IS RUNNING IN PARALLEL ON >> THE NCEP CENTRAL COMPUTING SYSTEM IN MID APRIL. AT THAT TIME >> THE PARALLEL DATA WILL BECOME AVAILABLE VIA THE FOLLOWING URL >> /USE LOWERCASE/: >> >> FTP://FTP.NCEP.NOAA.GOV/PUB/DATA/NCCF/COM/GFS/PARA >> >> DATA DELIVERY TIMING OF THE GFS WILL NOT BE IMPACTED BY THIS >> IMPLEMENTATION. >> >> NCEP ENCOURAGES ALL USERS TO ENSURE THEIR DECODERS ARE >> FLEXIBLE AND ARE ABLE OF ADEQUATELY HANDLING CHANGES IN >> CONTENT...PARAMETER FIELDS CHANGING ORDER...CHANGES IN THE >> SCALING FACTOR COMPONENT WITHIN THE PRODUCT DEFINITION >> SECTION /PDS/ OF THE GRIB FILES AND ANY VOLUME CHANGES WHICH >> MAY OCCUR. THESE ELEMENTS MAY CHANGE WITH FUTURE NCEP MODEL >> IMPLEMENTATIONS. NCEP WILL MAKE EVERY ATTEMPT TO ALERT USERS >> TO THESE CHANGES PRIOR TO ANY IMPLEMENTATIONS. >> >> IF YOU HAVE ANY QUESTIONS CONCERNING THESE CHANGES...PLEASE >> CONTACT: >> >> JOHN H. WARD >> NCEP...GLOBAL MODELING BRANCH >> CAMP SPRINGS MARYLAND >> PHONE: 301-763-8000 X7185 >> EMAIL: JOHN.WARD at NOAA.GOV >> OR >> SHRINIVAS MOORTHI >> NCEP...GLOBAL MODELING BRANCH >> CAMP SPRINGS MARYLAND >> PHONE: 301-763-8000 X7233 >> EMAIL: SHRINIVAS.MOORTHI at NOAA.GOV >> >> NWS NATIONAL TECHNICAL IMPLEMENTATION NOTICES ARE ONLINE AT >> /USE LOWERCASE/: >> >> HTTP://WWW.WEATHER.GOV/OS/NOTIF.HTM >> >> $$ >> NNNN Regards, Kevin M Levey, MSc in Oceans and Atmospheric Sciences (University of Cape Town) Director of Meteorological Operations CustomWeather, Inc. San Francisco, California, USA "Taking the World by Storm!" http://www.customweather.com http://www.myforecast.com http://www.1stweather.com cell: 415-794-0411 work: 415-777-3566 email: klevey at customweather.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100604/9d5b7054/attachment-0001.html From gibiesgeorge at gmail.com Sat Jun 5 01:22:26 2010 From: gibiesgeorge at gmail.com (gibies george) Date: Sat, 5 Jun 2010 10:52:26 +0530 Subject: [gradsusr] GrADS: Redefine the time step of a variable Message-ID: >From a daily data I have calculated seasonal mean using ave function. 'define ssn=ave(ts,time='d1''mmm1',time='dn''mmmn')' Now how can I redefine the time step of 'ssn' variable to yearly. Presently it is having daily timestep. * Interactive grads script for Seasonal Mean Time series Index.* I am attaching an interactive GrADS script, which I have developed just now. This script gives you a seasonal mean climatology (spatial plot) of any parameter you specified at run time. Then you can create a box with the mouse in you pc. After that you will get a box averaged seasonal mean time series Index of the specified parameter. A smple output (index.pdf) also is attached. -- Gibies George,CSIR-RF, Climate and Global Modelling Division, Indian Institute of Tropical Meteorology, Dr. Homi Bhabha Road, NCL (P. O.), Pashan, Pune 411008, India. http://sites.google.com/site/gibiesge/ Think about the environment. Please don't print this e-mail unless it is necessary. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100605/424c0d29/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: SMTSIndex.gs Type: application/octet-stream Size: 4031 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100605/424c0d29/attachment.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: index.pdf Type: application/pdf Size: 10716 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100605/424c0d29/attachment.pdf From hyacinth.1 at hotmail.com Sun Jun 6 02:21:21 2010 From: hyacinth.1 at hotmail.com (Hyacinth Nnamchi) Date: Sun, 6 Jun 2010 14:21:21 +0800 Subject: [gradsusr] eof (san luo) In-Reply-To: References: Message-ID: Dear San, You can access a fortran progam for EOF analysis from this site: http://www.lasg.ac.cn/staff/ljp/Csubroutine.html Good luck. Hyacinth > > Message: 2 > Date: Thu, 3 Jun 2010 13:54:01 +0800 > From: san luo > Subject: [gradsusr] eof > To: gradsusr at gradsusr.org > Message-ID: > > Content-Type: text/plain; charset=ISO-8859-1 > > Hello, everyone! who has a EOF fortran program?please give me a hand! > > > ------------------------------ _________________________________________________________________ Hotmail: Trusted email with Microsoft?s powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100606/dca06573/attachment.html From Phil.Cogbill at noaa.gov Mon Jun 7 09:37:11 2010 From: Phil.Cogbill at noaa.gov (Phil Cogbill) Date: Mon, 07 Jun 2010 09:37:11 -0400 Subject: [gradsusr] undef in GrADS 2 In-Reply-To: <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> References: <4C094BD0.9080906@noaa.gov> <4C095AEA.6090300@noaa.gov> <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> Message-ID: <4C0CF607.60100@noaa.gov> Works like a charm! I had seen this note, but thought that since we had a newer version of GrADS than 2.0.a6 that it wouldn't be an issue. Like a version specific bug since it says... " If you are administering a GDS version 2.0 with GrADS 2.0.a6 behind it... " This is a huge help and has cleared up a lot of issues we had coming from GDS. Thanks a TON! Again, thank you so much! --Phil Jennifer Adams wrote: > Yes, this does also affect the GDS. Here's the scoop from the GDS home > page: > > */Important Note for GDS Administrators (June 2009)/*: The recent > release of GrADS (version 2.0.a6) implemented some necessary changes > related to the handling of undefined values. These changes can affect > the GDS. If you are administering a GDS version 2.0 with GrADS 2.0.a6 > behind it, then a 1-line patch is needed for the file > $GDSHOME/scripts/subset.gs. The patched version is here > . Updating the subset.gs > script does not require a reinstallation or even a reload of your GDS. > > In case the link doesn't work, the patched version is > http://iges.org/grads/gds/patched_subset.gs > > --Jennifer > > > On Jun 4, 2010, at 3:58 PM, Phil Cogbill wrote: > >> Thanks Jennifer! >> >> I read about this some more and that worked _great_ in GrADS 2, but >> what about GDS 2? I am still seeing this problem coming from GDS 2 >> and it is causing problems for other software that uses the GDS2 >> service. I've looked through the configuration reference for GDS, >> but do not see a way to set undef. Any ideas? >> >> Phil >> >> >> Jennifer Adams wrote: >>> Hi, Phil -- >>> Undef handling was changed in version 2.0.a6. Please use the 'set >>> undef' command to set the undef value for all GrADS display and output. >>> The changelog has the notification of this >>> change http://iges.org/grads/changelog-2.0.txt . >>> Please also look at the >>> documentation: http://iges.org/grads/gadoc/gradcomdsetundef.html >>> Search the archives for "set undef" and you'll find more posts about >>> this. >>> --Jennifer >>> >>> >>> On Jun 4, 2010, at 2:54 PM, Phil Cogbill wrote: >>> >>>> I am having a problem with GrADS not honoring the undef value in the >>>> control files and instead use -9.99e8 rather than 9.999e20. This has >>>> just recently come about when we upgraded to GrADS 2. Do I need to add >>>> to my control file something for this to work? >>>> >>>> Thanks! >>>> Phil >>>> >>>> >>>> _______________________________________________ >>>> gradsusr mailing list >>>> gradsusr at gradsusr.org >>>> http://gradsusr.org/mailman/listinfo/gradsusr >>> >>> -- >>> Jennifer M. Adams >>> IGES/COLA >>> 4041 Powder Mill Road, Suite 302 >>> Calverton, MD 20705 >>> jma at cola.iges.org >>> >>> >>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> gradsusr mailing list >>> gradsusr at gradsusr.org >>> http://gradsusr.org/mailman/listinfo/gradsusr >>> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > ------------------------------------------------------------------------ > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100607/261bc775/attachment-0001.html From jma at cola.iges.org Mon Jun 7 09:50:45 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Mon, 7 Jun 2010 09:50:45 -0400 Subject: [gradsusr] undef in GrADS 2 In-Reply-To: <4C0CF607.60100@noaa.gov> References: <4C094BD0.9080906@noaa.gov> <4C095AEA.6090300@noaa.gov> <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> <4C0CF607.60100@noaa.gov> Message-ID: On Jun 7, 2010, at 9:37 AM, Phil Cogbill wrote: > Works like a charm! I had seen this note, but thought that since we > had a newer version of GrADS than 2.0.a6 that it wouldn't be an > issue. Like a version specific bug since it says... > > " If you are administering a GDS version 2.0 with GrADS 2.0.a6 > behind it... " I have updated the message on the GDS homepage with "... 2.0.a6 or higher behind it ..." That was an important clarification. Thanks for pointing it out. Glad to hear your GDS is working as expected now. --Jennifer > > This is a huge help and has cleared up a lot of issues we had > coming from GDS. Thanks a TON! > > Again, thank you so much! > > --Phil > > > Jennifer Adams wrote: >> >> Yes, this does also affect the GDS. Here's the scoop from the GDS >> home page: >> >> Important Note for GDS Administrators (June 2009): The recent >> release of GrADS (version 2.0.a6) implemented some necessary >> changes related to the handling of undefined values. These changes >> can affect the GDS. If you are administering a GDS version 2.0 with >> GrADS 2.0.a6 behind it, then a 1-line patch is needed for the file >> $GDSHOME/scripts/subset.gs. The patched version is here. Updating >> the subset.gs script does not require a reinstallation or even a >> reload of your GDS. >> >> In case the link doesn't work, the patched version is http://iges.org/grads/gds/patched_subset.gs >> >> --Jennifer >> >> >> On Jun 4, 2010, at 3:58 PM, Phil Cogbill wrote: >> >>> Thanks Jennifer! >>> >>> I read about this some more and that worked great in GrADS 2, but >>> what about GDS 2? I am still seeing this problem coming from GDS >>> 2 and it is causing problems for other software that uses the GDS2 >>> service. I've looked through the configuration reference for GDS, >>> but do not see a way to set undef. Any ideas? >>> >>> Phil >>> >>> >>> Jennifer Adams wrote: >>>> >>>> Hi, Phil -- >>>> Undef handling was changed in version 2.0.a6. Please use the 'set >>>> undef' command to set the undef value for all GrADS display and >>>> output. >>>> The changelog has the notification of this change http://iges.org/grads/changelog-2.0.txt >>>> . >>>> Please also look at the documentation: http://iges.org/grads/gadoc/gradcomdsetundef.html >>>> Search the archives for "set undef" and you'll find more posts >>>> about this. >>>> --Jennifer >>>> >>>> >>>> On Jun 4, 2010, at 2:54 PM, Phil Cogbill wrote: >>>> >>>>> I am having a problem with GrADS not honoring the undef value in >>>>> the >>>>> control files and instead use -9.99e8 rather than 9.999e20. >>>>> This has >>>>> just recently come about when we upgraded to GrADS 2. Do I need >>>>> to add >>>>> to my control file something for this to work? >>>>> >>>>> Thanks! >>>>> Phil >>>>> >>>>> >>>>> _______________________________________________ >>>>> gradsusr mailing list >>>>> gradsusr at gradsusr.org >>>>> http://gradsusr.org/mailman/listinfo/gradsusr >>>> >>>> -- >>>> Jennifer M. Adams >>>> IGES/COLA >>>> 4041 Powder Mill Road, Suite 302 >>>> Calverton, MD 20705 >>>> jma at cola.iges.org >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> gradsusr mailing list >>>> gradsusr at gradsusr.org >>>> http://gradsusr.org/mailman/listinfo/gradsusr >>>> >>> _______________________________________________ >>> gradsusr mailing list >>> gradsusr at gradsusr.org >>> http://gradsusr.org/mailman/listinfo/gradsusr >> >> -- >> Jennifer M. Adams >> IGES/COLA >> 4041 Powder Mill Road, Suite 302 >> Calverton, MD 20705 >> jma at cola.iges.org >> >> >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr >> > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100607/8bd15c2e/attachment.html From brian.walsh at amec.com Mon Jun 7 11:37:45 2010 From: brian.walsh at amec.com (Walsh, Brian J) Date: Mon, 7 Jun 2010 11:37:45 -0400 Subject: [gradsusr] Date/Time Axis Message-ID: Hi, I have a time series plot (attached) of ocean current data. The default time on the x-axis is in UTC time; how can I convert this to another time zone (i.e. is there a set x-axis command that will subtract 3 hours from the UTC time)? Thanks Brian ________________________________ The information contained in this e-mail is intended only for the individual or entity to whom it is addressed. Its contents (including any attachments) may contain confidential and/or privileged information. If you are not an intended recipient you must not use, disclose, disseminate, copy or print its contents. If you receive this e-mail in error, please notify the sender by reply e-mail and delete and destroy the message. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100607/5574d569/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: TIMESERIES.2010060700.jpg Type: image/jpeg Size: 4704 bytes Desc: TIMESERIES.2010060700.jpg Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100607/5574d569/attachment.jpg From thubuddar at gmail.com Mon Jun 7 17:36:24 2010 From: thubuddar at gmail.com (Queen thubuddar) Date: Tue, 8 Jun 2010 06:36:24 +0900 Subject: [gradsusr] how can I download In-Reply-To: <00de01cb0321$026fda40$0e00a8c0@forecaster> References: <00de01cb0321$026fda40$0e00a8c0@forecaster> Message-ID: Thanks Marck. I will try . Saw On Thu, Jun 3, 2010 at 10:31 PM, Marck Oduber wrote: > > Your best bet is to use opengrads ..especially if your a beginner... > > > http://opengrads.org/wiki/index.php?title=Installing_GrADS_v2.0_on_Microsoft_Windows#Downloading_the_software > > marck > > ----- Original Message ----- > *From:* Queen thubuddar > *To:* gradsusr at gradsusr.org > *Sent:* Thursday, June 03, 2010 05:11 > *Subject:* [gradsusr] how can I download > > Hello everyone, > > I want to use grads in window XP. > But I cannot find grads for window. > So, please tell me how to I install in windowXP. > > Thanks, > > > SAW > > ------------------------------ > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > ------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release Date: 06/03/10 > 06:25:00 > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100608/f52ada88/attachment-0001.html From info at severeweather.nl Tue Jun 8 17:42:36 2010 From: info at severeweather.nl (Info Severeweather) Date: Tue, 8 Jun 2010 23:42:36 +0200 Subject: [gradsusr] Grads plotting Message-ID: <005701cb0753$82d41c10$887c5430$@nl> Hi Guys, I have made a index with a friend of me and gfs is plotting not completed maps, I have included a preview of it http://www.severeweather.nl/gfs/kbv/000.png I hope someone know what to do to fix this ! Thanks in advance! Kevin Broeren -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100608/9364d4cd/attachment.html From smcmillan at planalytics.com Tue Jun 8 18:29:17 2010 From: smcmillan at planalytics.com (Stephen McMillan) Date: Tue, 8 Jun 2010 18:29:17 -0400 Subject: [gradsusr] Grads plotting In-Reply-To: <005701cb0753$82d41c10$887c5430$@nl> References: <005701cb0753$82d41c10$887c5430$@nl> Message-ID: Kevin, You didn't define what you consider to be a completed map but, from the looks of the map you sent, it would appear that you have missing data in one or more of your parameters. This could also occur if you used a masking function at some point. The const( ) function may help by re-defining any missing data (as zero, for example) so that they are included in the plot and perhaps eliminate the boxy appearance. Otherwise, without knowing how you computed or plotted the map, I can't be of much help here. A basic script or command log would help a lot. Did you get any error responses when you plotted it? Good luck-- Stephen McMillan On Tue, Jun 8, 2010 at 5:42 PM, Info Severeweather wrote: > Hi Guys, > > > > I have made a index with a friend of me and gfs is plotting not completed > maps, I have included a preview of it > > > > http://www.severeweather.nl/gfs/kbv/000.png > > > > > > I hope someone know what to do to fix this ! > > > > Thanks in advance! > > > > Kevin Broeren > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > *************************************************** The information contained in this e-mail message is intended only for the use of the recipient(s) named above and may contain information that is privileged, confidential, and/or proprietary. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the sender immediately by e-mail, and delete the original message. *************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100608/90cb9317/attachment.html From info at severeweather.nl Wed Jun 9 02:35:08 2010 From: info at severeweather.nl (Info Severeweather) Date: Wed, 9 Jun 2010 08:35:08 +0200 Subject: [gradsusr] Grads plotting In-Reply-To: References: <005701cb0753$82d41c10$887c5430$@nl> Message-ID: <006e01cb079d$e7cd4340$b767c9c0$@nl> Hi Stephen, Thanks for your response, This is my script: 'define dlscape = sqrt(dls)*sqrt(capegrond/20)' 'define temps = ((ept500+ept700)-(ept850+ept1000))/2' 'define kbv = dlscape-temps' Best regards, Kevin Broeren Van: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] Namens Stephen McMillan Verzonden: woensdag 9 juni 2010 0:29 Aan: GrADS Users Forum Onderwerp: Re: [gradsusr] Grads plotting Kevin, You didn't define what you consider to be a completed map but, from the looks of the map you sent, it would appear that you have missing data in one or more of your parameters. This could also occur if you used a masking function at some point. The const( ) function may help by re-defining any missing data (as zero, for example) so that they are included in the plot and perhaps eliminate the boxy appearance. Otherwise, without knowing how you computed or plotted the map, I can't be of much help here. A basic script or command log would help a lot. Did you get any error responses when you plotted it? Good luck-- Stephen McMillan On Tue, Jun 8, 2010 at 5:42 PM, Info Severeweather wrote: Hi Guys, I have made a index with a friend of me and gfs is plotting not completed maps, I have included a preview of it http://www.severeweather.nl/gfs/kbv/000.png I hope someone know what to do to fix this ! Thanks in advance! Kevin Broeren _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr *************************************************** The information contained in this e-mail message is intended only for the use of the recipient(s) named above and may contain information that is privileged, confidential, and/or proprietary. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the sender immediately by e-mail, and delete the original message. *************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100609/b900aa1e/attachment.html From Wesley.Ebisuzaki at noaa.gov Wed Jun 9 08:34:01 2010 From: Wesley.Ebisuzaki at noaa.gov (Wesley Ebisuzaki) Date: Wed, 09 Jun 2010 08:34:01 -0400 Subject: [gradsusr] testers wanted: grads to grib2 script In-Reply-To: <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> References: <4C094BD0.9080906@noaa.gov> <4C095AEA.6090300@noaa.gov> <2657F72C-F9B1-4EA7-BD4F-226812E2F3E6@cola.iges.org> Message-ID: <4C0F8A39.7010109@noaa.gov> Hi, I wanted the MERRA dataset (HDF/GDS) in grib2 format so g2grb.gs was written. g2grb allows you to write grib2 files from grads. Testers wanted: requirements: latest version of wgrib2 installed know grib2 send results to wesley.ebisuzaki at noaa.gov instructions: http://www.cpc.noaa.gov/products/wesley/g2grb.html Wesley Ebisuzaki From huber.gilt at igp.gob.pe Thu Jun 10 11:15:40 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Thu, 10 Jun 2010 10:15:40 -0500 Subject: [gradsusr] unsupported --with-jpeg option in hdf5 configure file Message-ID: <201006101522.o5AFMspA016257@geo.igp.gob.pe> Hello Everybody, I?m trying to compile the hdf5, supplemental library, but in the documentation file (http://iges.org/grads/gadoc/supplibs ), say to configure with the command: cd $HOME/supplibs/src/ tar xvfz tarfiles/hdf5-1.8.4-patch1.tar.gz cd hdf5-1.8.4-patch1/ ./configure --disable-shared --disable-fortran \ --with-zlib=$HOME/supplibs/src/zlib-1.2.3 \ --with-jpeg=$HOME/supplibs/src/jpeg-6b \ --with-szlib=$HOME/supplibs/src/szip-2.1 \ --prefix=$HOME/supplibs/src/hdf5-1.8.4-patch1 make make install cp ./lib/libhdf5.a $HOME/supplibs/lib cp ./lib/libhdf5_hl.a $HOME/supplibs/lib mkdir $HOME/supplibs/include/hdf5 cp ./include/*.h $HOME/supplibs/include/hdf5/ Then throws the warning, hdf5 don?t need jpeg libraries? configure: WARNING: unrecognized options: --with-jpeg configure: WARNING: unrecognized options: --with-jpeg Thanks a lot, Best regards, Huber -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100610/6020c71a/attachment-0001.html From paolo.losi at gmail.com Thu Jun 10 11:49:02 2010 From: paolo.losi at gmail.com (Paolo Losi) Date: Thu, 10 Jun 2010 17:49:02 +0200 Subject: [gradsusr] Availability of last 12 months GFS ensemble data Message-ID: Hi all, I apologize for my mail not being exactly on topic (is there more appropriate mailing list / forum for such requests?). I'm looking for the last 12 months GFS ensemble data (20 runs + control). Does anyone know if it is available and where in grib format? I've looked at ncep website without success. Thanks Paolo From roger.torres at cptec.inpe.br Thu Jun 10 12:12:11 2010 From: roger.torres at cptec.inpe.br (Roger Rodrigues Torres) Date: Thu, 10 Jun 2010 12:12:11 -0400 Subject: [gradsusr] Availability of last 12 months GFS ensemble data In-Reply-To: References: Message-ID: Hi Paulo, maybe what you are looking for is in http://www.esrl.noaa.gov/psd/forecasts/reforecast Cheers, Roger 2010/6/10 Paolo Losi > Hi all, > > I apologize for my mail not being exactly on topic (is there more > appropriate > mailing list / forum for such requests?). > I'm looking for the last 12 months GFS ensemble data (20 runs + control). > Does anyone know if it is available and where in grib format? > I've looked at ncep website without success. > > Thanks > Paolo > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > -- Roger Rodrigues Torres Ph.D. Student National Institute for Space Research (INPE) Center for Weather Forecast and Climate Studies (CPTEC) Phone: 55 12 3186-9541 Personal Webpage: http://rtorres.webnode.com.br -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100610/af9af624/attachment.html From andy at f5data.com Thu Jun 10 22:33:32 2010 From: andy at f5data.com (Andrew Revering) Date: Thu, 10 Jun 2010 21:33:32 -0500 Subject: [gradsusr] Regridding/Replace Value Question Message-ID: <101701cb090e$80140960$803c1c20$@com> Is there a way to replace a grid value during the regridding process using 're()' or similar function? I need to be able to return a specific coordinate (latitude/longitude) for the point we're regridding, along with it's value and then be able to change the value at that point. Andy -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100610/c0673404/attachment.html From smcmillan at planalytics.com Fri Jun 11 07:59:56 2010 From: smcmillan at planalytics.com (Stephen McMillan) Date: Fri, 11 Jun 2010 07:59:56 -0400 Subject: [gradsusr] Regridding/Replace Value Question In-Reply-To: <101701cb090e$80140960$803c1c20$@com> References: <101701cb090e$80140960$803c1c20$@com> Message-ID: Andy, Check out the 'set defval...' command in the documentation index: http://www.iges.org/grads/gadoc/gradcomdsetdefval.html I believe it will do what you want. Stephen McMillan On Thu, Jun 10, 2010 at 10:33 PM, Andrew Revering wrote: > Is there a way to replace a grid value during the regridding process > using 're()' or similar function? > > > > I need to be able to return a specific coordinate (latitude/longitude) for > the point we're regridding, along with it's value and then be able to change > the value at that point. > > > > Andy > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > *************************************************** The information contained in this e-mail message is intended only for the use of the recipient(s) named above and may contain information that is privileged, confidential, and/or proprietary. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the sender immediately by e-mail, and delete the original message. *************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/08b9def6/attachment.html From jtraite2 at atmos.illinois.edu Fri Jun 11 12:08:38 2010 From: jtraite2 at atmos.illinois.edu (Justin Traiteur) Date: Fri, 11 Jun 2010 10:08:38 -0600 Subject: [gradsusr] Point Vertical Cross-Section to Text ouput Message-ID: Does anybody know how to take a vertical sounding of a lat lon location of an analysis map and output the values at each vertical level to a text document? I will need temperature, pressure, U, V, and Specific humidity exported into a text file in order to be ingested into the WRF. Thanks! Justin From huber.gilt at igp.gob.pe Fri Jun 11 14:11:34 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Fri, 11 Jun 2010 13:11:34 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Message-ID: <201006111818.o5BIIlvm011180@geo.igp.gob.pe> Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/3d9b7329/attachment.html From jma at cola.iges.org Fri Jun 11 14:37:03 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Fri, 11 Jun 2010 14:37:03 -0400 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006111818.o5BIIlvm011180@geo.igp.gob.pe> References: <201006111818.o5BIIlvm011180@geo.igp.gob.pe> Message-ID: <32D1C489-08A4-4793-B78C-7303FCBA4315@cola.iges.org> On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: > Hello, > > I?m trying to build grads with netcdf option enable, after I > configured the grads with this command: > > ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf- > include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than -- prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... > > I had the following message that ludunits library is not found: > > Checking in supplibs for libraries to support netcdf-4 ... > checking for udunits.h... (cached) yes > checking for utInit in -ludunits... (cached) no > - netcdf-4 disabled > > Then, I tried to build the source ldudunits library with the make > command, and also I had this error: > > cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/ > data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/ > udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/ > misc -ludport -ly -lm > (Bundled) cc: warning 922: "-O" is unsupported in the bundled > compiler, ignored. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/lib': use +help for online documentation. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/port/misc': use +help for online documentation. > ld: Can't find library for -ludunits > Fatal error. > > Why the compilation needs the ludunits library, I was thought this > library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer > > > Please help me > Best regards, > > Huber Paul Gilt Lopez > IGP-Peru > > > > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/d61c3d98/attachment-0001.html From jma at cola.iges.org Fri Jun 11 14:39:00 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Fri, 11 Jun 2010 14:39:00 -0400 Subject: [gradsusr] unsupported --with-jpeg option in hdf5 configure file In-Reply-To: <201006101522.o5AFMspA016257@geo.igp.gob.pe> References: <201006101522.o5AFMspA016257@geo.igp.gob.pe> Message-ID: Yes, that is my mistake, although it is harmless. The HDF4 library uses jpeg, but hdf5 does not, and I accidentally left it in my ./ configure command. --Jennifer On Jun 10, 2010, at 11:15 AM, Huber Pa?l Gilt L?pez wrote: > Hello Everybody, > > I?m trying to compile the hdf5, supplemental library, but in the > documentation file (http://iges.org/grads/gadoc/supplibs > ), say to configure with the command: > cd $HOME/supplibs/src/ > tar xvfz tarfiles/hdf5-1.8.4-patch1.tar.gz > cd hdf5-1.8.4-patch1/ > ./configure --disable-shared --disable-fortran \ > --with-zlib=$HOME/supplibs/src/zlib-1.2.3 \ > --with-jpeg=$HOME/supplibs/src/jpeg-6b \ > --with-szlib=$HOME/supplibs/src/szip-2.1 \ > --prefix=$HOME/supplibs/src/hdf5-1.8.4-patch1 > make > make install > cp ./lib/libhdf5.a $HOME/supplibs/lib > cp ./lib/libhdf5_hl.a $HOME/supplibs/lib > mkdir $HOME/supplibs/include/hdf5 > cp ./include/*.h $HOME/supplibs/include/hdf5/ > > Then throws the warning, hdf5 don?t need jpeg libraries? > > configure: WARNING: unrecognized options: --with-jpeg > configure: WARNING: unrecognized options: --with-jpeg > > Thanks a lot, > > Best regards, > Huber > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/2493cd1f/attachment.html From smcmillan at planalytics.com Fri Jun 11 14:48:26 2010 From: smcmillan at planalytics.com (Stephen McMillan) Date: Fri, 11 Jun 2010 14:48:26 -0400 Subject: [gradsusr] Point Vertical Cross-Section to Text ouput In-Reply-To: References: Message-ID: Justin, Attached script may accomplish what you want. It is for a single grid point (-76, 40) and timestep (5). You would need to edit the variable names, add additional while loops for time, location, etc. I hope it's what you had in mind. I also included sample output from this script, using today's 12z GFS run. Stephen McMillan On Fri, Jun 11, 2010 at 12:08 PM, Justin Traiteur < jtraite2 at atmos.illinois.edu> wrote: > Does anybody know how to take a vertical sounding of a lat lon > location of an analysis map and output the values at each vertical > level to a text document? I will need temperature, pressure, U, V, > and Specific humidity exported into a text file in order to be > ingested into the WRF. > > Thanks! > Justin > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > *************************************************** The information contained in this e-mail message is intended only for the use of the recipient(s) named above and may contain information that is privileged, confidential, and/or proprietary. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the sender immediately by e-mail, and delete the original message. *************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/646b4357/attachment.html -------------- next part -------------- tmp(c) u(m/s) v(m/s) plev(mb) 22.54 -1.5 3.6 1000 21.84 -1.3 5.0 975 19.74 -0.7 4.7 950 17.54 0.2 3.7 925 15.64 1.8 2.0 900 14.34 4.1 -0.7 875 13.34 6.5 -3.9 850 12.44 7.8 -6.9 825 11.24 6.9 -8.5 800 10.24 5.5 -8.4 775 8.84 5.6 -8.2 750 7.14 6.5 -8.5 725 5.34 7.1 -9.3 700 3.94 7.1 -9.7 675 3.34 8.3 -9.2 650 2.24 9.2 -8.7 625 0.94 9.8 -8.1 600 -0.06 9.6 -7.8 575 -1.46 8.2 -8.7 550 -2.86 6.4 -9.6 525 -4.36 4.4 -10.0 500 -7.26 3.8 -10.9 475 -10.16 3.7 -11.8 450 -13.16 4.2 -12.7 425 -16.46 6.8 -13.4 400 -19.86 8.2 -13.6 375 -23.86 8.4 -13.0 350 -28.66 8.3 -12.2 325 -33.36 9.8 -14.1 300 -38.16 10.6 -14.1 275 -43.46 10.8 -14.4 250 -48.96 10.5 -13.1 225 -54.96 14.4 -10.2 200 -60.66 17.9 -10.5 175 -64.36 12.1 -12.0 150 -67.06 3.0 -8.2 125 -67.16 4.0 -13.1 100 -61.96 -2.1 -6.6 70 -59.36 -8.1 -4.3 50 -51.96 -5.1 -1.2 30 -------------- next part -------------- A non-text attachment was scrubbed... Name: vertout.gs Type: application/octet-stream Size: 850 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100611/646b4357/attachment.obj From huber.gilt at igp.gob.pe Fri Jun 11 17:24:19 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Fri, 11 Jun 2010 16:24:19 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <32D1C489-08A4-4793-B78C-7303FCBA4315@cola.iges.org> Message-ID: <201006112131.o5BLVWs6015700@geo.igp.gob.pe> Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/1031c56a/attachment-0001.html From jma at cola.iges.org Fri Jun 11 17:48:17 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Fri, 11 Jun 2010 17:48:17 -0400 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006112131.o5BLVWs6015700@geo.igp.gob.pe> References: <201006112131.o5BLVWs6015700@geo.igp.gob.pe> Message-ID: <05C95522-EB25-4946-B67B-DC034D2BC0D2@cola.iges.org> That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: > Hello Jennifer, > > Thanks you for your help, I just enabled the netcdf option but now > after make command, akin the error message: > > > gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../ > supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/ > include/hdf -g -O2 -c gasdf.c > gasdf.c: In function 'read_metadata': > gasdf.c:2278: error: 'name' undeclared (first use in this function) > gasdf.c:2278: error: (Each undeclared identifier is reported only once > gasdf.c:2278: error: for each function it appears in.) > make[2]: *** [gasdf.o] Error 1 > make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > make[1]: *** [all] Error 2 > make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > make: *** [all-recursive] Error 1 > > > How can I fix this undeclared ?name?? > > Please help me, > > Best regards, > Huber > > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org > ] En nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 13:37 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > > On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: > > > Hello, > > I?m trying to build grads with netcdf option enable, after I > configured the grads with this command: > > ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf- > include=/home/huber/grads/supplibs/include/netcdf > config.out > > You should not need to specify any configure options (other than -- > prefix) to get netcdf support. I did not write any code to support > the "--with-netcdf-include" option... > > > > I had the following message that ludunits library is not found: > > Checking in supplibs for libraries to support netcdf-4 ... > checking for udunits.h... (cached) yes > checking for utInit in -ludunits... (cached) no > - netcdf-4 disabled > > Then, I tried to build the source ldudunits library with the make > command, and also I had this error: > > cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/ > data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/ > udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/ > misc -ludport -ly -lm > (Bundled) cc: warning 922: "-O" is unsupported in the bundled > compiler, ignored. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/lib': use +help for online documentation. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/port/misc': use +help for online documentation. > ld: Can't find library for -ludunits > Fatal error. > > Why the compilation needs the ludunits library, I was thought this > library will be the output? > > What you're trying to build here is a utility called 'udunits' -- > that is something that is built along with the library, but it is > not necessary for GrADS. > > Look for a file called libudunits.a -- that is what GrADS needs -- > and put it in your $SUPPLIBS/lib location. > > --Jennifer > > >> >> >> Please help me >> Best regards, >> >> Huber Paul Gilt Lopez >> IGP-Peru >> >> >> >> >> >> >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr > > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/d82939c6/attachment-0001.html From huber.gilt at igp.gob.pe Fri Jun 11 18:06:44 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Fri, 11 Jun 2010 17:06:44 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <05C95522-EB25-4946-B67B-DC034D2BC0D2@cola.iges.org> Message-ID: <201006112213.o5BMDvI5016639@geo.igp.gob.pe> Jennifer, Sorry, I can?t understand the patch for gasdf.c, but according with to suggest I going to compile hdf4. Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/c9ed1f0e/attachment-0001.html From andy at f5data.com Fri Jun 11 18:27:19 2010 From: andy at f5data.com (Andrew Revering) Date: Fri, 11 Jun 2010 17:27:19 -0500 Subject: [gradsusr] Regridding/Replace Value Question In-Reply-To: References: <101701cb090e$80140960$803c1c20$@com> Message-ID: <124401cb09b5$44596170$cd0c2450$@com> This is perfect -- EXCEPT -- that what I'm doing is actually using GrADS (or maybe its OpenGrads, I'm not sure) to regrid the data into a new netCDF file. I'm not using GrADS itself for display until after I've combined several NetCDFs into one large NetCDF file. The point of this is so that I can properly overlay data at the same points (radar data..overlaying overlapping radar sites). . so right now I'm looking at the data and choosing which value to use at a specific coordinate given multiple radar sites, but I don't know that I can identify what the coordinate is of the data point I'm looking at using re(). Maybe I'm just not using it properly. What I want to do is know the actual coordinate so I can identify how far away it is from the radar site, and then with that information decide if I want to identify the return for that point as ground clutter and set its value to 0. So in short.. I need something like defval, but I need to be able to do it during the regridding process, not involving the display in GrADS. I want to do it before I write out the final NetCDF. Thoughts? From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Stephen McMillan Sent: Friday, June 11, 2010 7:00 AM To: GrADS Users Forum Subject: Re: [gradsusr] Regridding/Replace Value Question Andy, Check out the 'set defval...' command in the documentation index: http://www.iges.org/grads/gadoc/gradcomdsetdefval.html I believe it will do what you want. Stephen McMillan On Thu, Jun 10, 2010 at 10:33 PM, Andrew Revering wrote: Is there a way to replace a grid value during the regridding process using 're()' or similar function? I need to be able to return a specific coordinate (latitude/longitude) for the point we're regridding, along with it's value and then be able to change the value at that point. Andy _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr *************************************************** The information contained in this e-mail message is intended only for the use of the recipient(s) named above and may contain information that is privileged, confidential, and/or proprietary. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the sender immediately by e-mail, and delete the original message. *************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/4395c509/attachment.html From cmunozc at udec.cl Fri Jun 11 19:22:25 2010 From: cmunozc at udec.cl (Cristian Gonzal =?iso-8859-1?Q?Mu=F1oz_Castillo?=) Date: Fri, 11 Jun 2010 19:22:25 -0400 (CLT) Subject: [gradsusr] Reading grib1 output from GFS In-Reply-To: <124401cb09b5$44596170$cd0c2450$@com> References: <101701cb090e$80140960$803c1c20$@com> <124401cb09b5$44596170$cd0c2450$@com> Message-ID: Hi everyone, I want to read grib1 output format from global GFS data. I use grib2ctl.pl and gribmap to do the control file that allows me to read the data but i can't get the global map projection i want because the .ctl output only shows me one region in particular. I know it's something about the PDEF definition but i don't know how to work that out. I found a reference page (http://grads.iges.org/grads/gadoc/pdef.html) but i don't know where to edit the .ctl file. Any suggestions are much appreciated. -- Cristian G. Mu?oz Castillo Geof?sico Licenciado en Ciencias F?sicas Oficina 442 Depto. Geof?sica (DGEO) Fono (41) 2203155 Facultad Ciencias F?sicas y Matem?ticas Universidad de Concepci?n Concepci?n Chile From jma at cola.iges.org Fri Jun 11 20:33:52 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Fri, 11 Jun 2010 20:33:52 -0400 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006112213.o5BMDvI5016639@geo.igp.gob.pe> References: <201006112213.o5BMDvI5016639@geo.igp.gob.pe> Message-ID: On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: > Jennifer, > > Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif > but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable- netcdf option when compiling that library. --Jennifer > > Thank you > Best regards > Huber > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org > ] En nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 16:48 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > That is a bug that occurs when you build with netcdf but without > hdf4. Here is the patch for gasdf.c : > > # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c > 2169d2168 > < char name[300]; > 2174c2173 > < char dimname[H4_MAX_NC_NAME+1]; > --- > > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; > > > > On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: > > > Hello Jennifer, > > Thanks you for your help, I just enabled the netcdf option but now > after make command, akin the error message: > > > gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../ > supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/ > include/hdf -g -O2 -c gasdf.c > gasdf.c: In function 'read_metadata': > gasdf.c:2278: error: 'name' undeclared (first use in this function) > gasdf.c:2278: error: (Each undeclared identifier is reported only once > gasdf.c:2278: error: for each function it appears in.) > make[2]: *** [gasdf.o] Error 1 > make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > make[1]: *** [all] Error 2 > make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > make: *** [all-recursive] Error 1 > > > How can I fix this undeclared ?name?? > > Please help me, > > Best regards, > Huber > > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org > ] En nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 13:37 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > > On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: > > > > Hello, > > I?m trying to build grads with netcdf option enable, after I > configured the grads with this command: > > ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf- > include=/home/huber/grads/supplibs/include/netcdf > config.out > > You should not need to specify any configure options (other than -- > prefix) to get netcdf support. I did not write any code to support > the "--with-netcdf-include" option... > > > > > I had the following message that ludunits library is not found: > > Checking in supplibs for libraries to support netcdf-4 ... > checking for udunits.h... (cached) yes > checking for utInit in -ludunits... (cached) no > - netcdf-4 disabled > > Then, I tried to build the source ldudunits library with the make > command, and also I had this error: > > cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/ > data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/ > udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/ > misc -ludport -ly -lm > (Bundled) cc: warning 922: "-O" is unsupported in the bundled > compiler, ignored. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/lib': use +help for online documentation. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/port/misc': use +help for online documentation. > ld: Can't find library for -ludunits > Fatal error. > > Why the compilation needs the ludunits library, I was thought this > library will be the output? > > What you're trying to build here is a utility called 'udunits' -- > that is something that is built along with the library, but it is > not necessary for GrADS. > > Look for a file called libudunits.a -- that is what GrADS needs -- > and put it in your $SUPPLIBS/lib location. > > --Jennifer > > >> >> >> Please help me >> Best regards, >> >> Huber Paul Gilt Lopez >> IGP-Peru >> >> >> >> >> >> >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr > > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/e9cf2a9f/attachment-0001.html From geeta124 at hotmail.com Sat Jun 12 08:27:30 2010 From: geeta124 at hotmail.com (Geeta Geeta) Date: Sat, 12 Jun 2010 12:27:30 +0000 Subject: [gradsusr] Output file is not written In-Reply-To: References: Message-ID: Dear All, I am running this following grads script for extracting the FORECAST temperature for a particular lat/lon. This script opens this grads template ctl file and the data files. 'reinit' ''open /temp/WORK/RUN00/wrf-outp_d01.ctl' 'set x 77.5' 'set y 12.5' 'set gxout print' 'set prnopts %1.2f' ts=1 while (ts=52) 'd (t2(t='ts')-273.16)' tmpbng=sublin(result,1) rc=write(/testuser/model/abc.dat,tmpbng,append) ts=ts+1 endwhile On running the grads, ga-> run t2avg.gs No hardcopy metafile open All files closed; all defined objects released All GrADS attributes have been reinitialized This scripts is RUN OK. But No output file is created. Kindly suggest. geeta > From: gradsusr-request at gradsusr.org > Subject: gradsusr Digest, Vol 4, Issue 13 > To: gradsusr at gradsusr.org > Date: Fri, 11 Jun 2010 17:26:55 -0400 > > Send gradsusr mailing list submissions to > gradsusr at gradsusr.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://gradsusr.org/mailman/listinfo/gradsusr > or, via email, send a message with subject or body 'help' to > gradsusr-request at gradsusr.org > > You can reach the person managing the list at > gradsusr-owner at gradsusr.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of gradsusr digest..." > > > Today's Topics: > > 1. Re: unsupported --with-jpeg option in hdf5 configure file > (Jennifer Adams) > 2. Re: Point Vertical Cross-Section to Text ouput (Stephen McMillan) > 3. Re: Enable netcdf 4.1.1 option in grads configure file > (Huber Pa?l Gilt L?pez) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 11 Jun 2010 14:39:00 -0400 > From: Jennifer Adams > Subject: Re: [gradsusr] unsupported --with-jpeg option in hdf5 > configure file > To: GrADS Users Forum > Message-ID: > Content-Type: text/plain; charset="windows-1252" > > Yes, that is my mistake, although it is harmless. The HDF4 library > uses jpeg, but hdf5 does not, and I accidentally left it in my ./ > configure command. > --Jennifer > > > On Jun 10, 2010, at 11:15 AM, Huber Pa?l Gilt L?pez wrote: > > > Hello Everybody, > > > > I?m trying to compile the hdf5, supplemental library, but in the > > documentation file (http://iges.org/grads/gadoc/supplibs > > ), say to configure with the command: > > cd $HOME/supplibs/src/ > > tar xvfz tarfiles/hdf5-1.8.4-patch1.tar.gz > > cd hdf5-1.8.4-patch1/ > > ./configure --disable-shared --disable-fortran \ > > --with-zlib=$HOME/supplibs/src/zlib-1.2.3 \ > > --with-jpeg=$HOME/supplibs/src/jpeg-6b \ > > --with-szlib=$HOME/supplibs/src/szip-2.1 \ > > --prefix=$HOME/supplibs/src/hdf5-1.8.4-patch1 > > make > > make install > > cp ./lib/libhdf5.a $HOME/supplibs/lib > > cp ./lib/libhdf5_hl.a $HOME/supplibs/lib > > mkdir $HOME/supplibs/include/hdf5 > > cp ./include/*.h $HOME/supplibs/include/hdf5/ > > > > Then throws the warning, hdf5 don?t need jpeg libraries? > > > > configure: WARNING: unrecognized options: --with-jpeg > > configure: WARNING: unrecognized options: --with-jpeg > > > > Thanks a lot, > > > > Best regards, > > Huber > > _______________________________________________ > > gradsusr mailing list > > gradsusr at gradsusr.org > > http://gradsusr.org/mailman/listinfo/gradsusr > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/2493cd1f/attachment-0001.html > > ------------------------------ > > Message: 2 > Date: Fri, 11 Jun 2010 14:48:26 -0400 > From: Stephen McMillan > Subject: Re: [gradsusr] Point Vertical Cross-Section to Text ouput > To: GrADS Users Forum > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > Justin, > Attached script may accomplish what you want. It is for a single grid point > (-76, 40) and timestep (5). You would need to edit the variable names, add > additional while loops for time, location, etc. I hope it's what you had in > mind. I also included sample output from this script, using today's 12z GFS > run. > > Stephen McMillan > > On Fri, Jun 11, 2010 at 12:08 PM, Justin Traiteur < > jtraite2 at atmos.illinois.edu> wrote: > > > Does anybody know how to take a vertical sounding of a lat lon > > location of an analysis map and output the values at each vertical > > level to a text document? I will need temperature, pressure, U, V, > > and Specific humidity exported into a text file in order to be > > ingested into the WRF. > > > > Thanks! > > Justin > > _______________________________________________ > > gradsusr mailing list > > gradsusr at gradsusr.org > > http://gradsusr.org/mailman/listinfo/gradsusr > > > > *************************************************** > The information contained in this e-mail message > is intended only for the use of the recipient(s) > named above and may contain information that is > privileged, confidential, and/or proprietary. > If you are not the intended recipient, you may not > review, copy or distribute this message. If you have > received this communication in error, please notify > the sender immediately by e-mail, and delete the original message. > *************************************************** > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/646b4357/attachment-0001.html > -------------- next part -------------- > tmp(c) u(m/s) v(m/s) plev(mb) > 22.54 -1.5 3.6 1000 > 21.84 -1.3 5.0 975 > 19.74 -0.7 4.7 950 > 17.54 0.2 3.7 925 > 15.64 1.8 2.0 900 > 14.34 4.1 -0.7 875 > 13.34 6.5 -3.9 850 > 12.44 7.8 -6.9 825 > 11.24 6.9 -8.5 800 > 10.24 5.5 -8.4 775 > 8.84 5.6 -8.2 750 > 7.14 6.5 -8.5 725 > 5.34 7.1 -9.3 700 > 3.94 7.1 -9.7 675 > 3.34 8.3 -9.2 650 > 2.24 9.2 -8.7 625 > 0.94 9.8 -8.1 600 > -0.06 9.6 -7.8 575 > -1.46 8.2 -8.7 550 > -2.86 6.4 -9.6 525 > -4.36 4.4 -10.0 500 > -7.26 3.8 -10.9 475 > -10.16 3.7 -11.8 450 > -13.16 4.2 -12.7 425 > -16.46 6.8 -13.4 400 > -19.86 8.2 -13.6 375 > -23.86 8.4 -13.0 350 > -28.66 8.3 -12.2 325 > -33.36 9.8 -14.1 300 > -38.16 10.6 -14.1 275 > -43.46 10.8 -14.4 250 > -48.96 10.5 -13.1 225 > -54.96 14.4 -10.2 200 > -60.66 17.9 -10.5 175 > -64.36 12.1 -12.0 150 > -67.06 3.0 -8.2 125 > -67.16 4.0 -13.1 100 > -61.96 -2.1 -6.6 70 > -59.36 -8.1 -4.3 50 > -51.96 -5.1 -1.2 30 > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: vertout.gs > Type: application/octet-stream > Size: 850 bytes > Desc: not available > Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100611/646b4357/attachment-0001.obj > > ------------------------------ > > Message: 3 > Date: Fri, 11 Jun 2010 16:24:19 -0500 > From: Huber Pa?l Gilt L?pez > Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > To: "'GrADS Users Forum'" > Message-ID: <201006112131.o5BLVWs6015700 at geo.igp.gob.pe> > Content-Type: text/plain; charset="iso-8859-1" > > Hello Jennifer, > > > > Thanks you for your help, I just enabled the netcdf option but now after > make command, akin the error message: > > > > > > gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits > -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 > -I/usr/include/hdf -g -O2 -c gasdf.c > > gasdf.c: In function 'read_metadata': > > gasdf.c:2278: error: 'name' undeclared (first use in this function) > > gasdf.c:2278: error: (Each undeclared identifier is reported only once > > gasdf.c:2278: error: for each function it appears in.) > > make[2]: *** [gasdf.o] Error 1 > > make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > > make[1]: *** [all] Error 2 > > make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > > make: *** [all-recursive] Error 1 > > > > > > How can I fix this undeclared ?name?? > > > > Please help me, > > > > Best regards, > > Huber > > > > > > _____ > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En > nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 13:37 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file > > > > > > On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: > > > > > > Hello, > > > > I?m trying to build grads with netcdf option enable, after I configured the > grads with this command: > > > > ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf > --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out > > > > You should not need to specify any configure options (other than --prefix) > to get netcdf support. I did not write any code to support the > "--with-netcdf-include" option... > > > > > > > > I had the following message that ludunits library is not found: > > > > Checking in supplibs for libraries to support netcdf-4 ... > > checking for udunits.h... (cached) yes > > checking for utInit in -ludunits... (cached) no > > - netcdf-4 disabled > > > > Then, I tried to build the source ldudunits library with the make command, > and also I had this error: > > > > cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib > -L/data/hoop/udunits-1.11.7/src/lib -ludunits > -R/data/hoop/udunits-1.11.7/src/port/misc > -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm > > (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, > ignored. > > (Bundled) cc: warning 901: unknown option: > `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. > > (Bundled) cc: warning 901: unknown option: > `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online > documentation. > > ld: Can't find library for -ludunits > > Fatal error. > > > > Why the compilation needs the ludunits library, I was thought this library > will be the output? > > > > What you're trying to build here is a utility called 'udunits' -- that is > something that is built along with the library, but it is not necessary for > GrADS. > > > > Look for a file called libudunits.a -- that is what GrADS needs -- and put > it in your $SUPPLIBS/lib location. > > > > --Jennifer > > > > > > > > > > > > Please help me > > Best regards, > > > > Huber Paul Gilt Lopez > > IGP-Peru > > > > > > > > > > > > > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > > > -- > > Jennifer M. Adams > > IGES/COLA > > 4041 Powder Mill Road, Suite 302 > > Calverton, MD 20705 > > jma at cola.iges.org > > > > > > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100611/1031c56a/attachment.html > > ------------------------------ > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > > End of gradsusr Digest, Vol 4, Issue 13 > *************************************** _________________________________________________________________ Bollywood, beauties and the latest flicks on MSN entertainment http://entertainment.in.msn.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100612/5d4a1c1e/attachment-0001.html From ray.river.lj at gmail.com Sun Jun 13 03:10:28 2010 From: ray.river.lj at gmail.com (=?GB2312?B?wNe9rQ==?=) Date: Sun, 13 Jun 2010 15:10:28 +0800 Subject: [gradsusr] gradsusr Digest, Vol 4, Issue 17 In-Reply-To: References: Message-ID: Re: Output file is not written (Geeta Geeta) try this script > 'reinit' > 'open f:/temp/WORK/RUN00/wrf-outp_d01.ctl' > 'set fwrite f:/temp/WORK/RUN00/abc.dat' > 'set gxout fwrite' > ts=1 while (ts<=52) > 'set x 77.5' > 'set y 12.5' > 'd (t2(t='ts')-273.16)' > ts=ts+1 > endwhile > ; -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100613/26254793/attachment.html From ray.river.lj at gmail.com Sun Jun 13 03:14:12 2010 From: ray.river.lj at gmail.com (=?GB2312?B?wNe9rQ==?=) Date: Sun, 13 Jun 2010 15:14:12 +0800 Subject: [gradsusr] gradsusr Digest, Vol 4, Issue 17 In-Reply-To: References: Message-ID: 2010/6/13 ?? > Re: Output file is not written (Geeta Geeta) > try this script > >> 'reinit' >> 'open f:/temp/WORK/RUN00/wrf-outp_d01.ctl' >> > 'set fwrite f:/temp/WORK/RUN00/abc.dat' > > >> 'set gxout fwrite' >> > ts=1 > > while (ts<=52) > >> 'set x 77.5' >> > 'set y 12.5' > > > >> 'd (t2(t='ts')-273.16)' >> > ts=ts+1 >> > endwhile >> > 'disable fwrite' I just forgot this order > ; > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100613/13f6907c/attachment.html From cellyn_lee53 at yahoo.com Mon Jun 14 04:58:08 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Mon, 14 Jun 2010 01:58:08 -0700 (PDT) Subject: [gradsusr] combined files Message-ID: <403531.99111.qm@web55503.mail.re4.yahoo.com> hi, ? Im using ncecat function to combine 30 files into one netcdf file, which the timestep should be 30. but when I try ncdump then it shows the 'record' is 30 but nt tsize. so how I dsiplay the figure of lets say 15th day? ? thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/cfa7eb43/attachment.html From bernd.becker at metoffice.gov.uk Mon Jun 14 06:47:28 2010 From: bernd.becker at metoffice.gov.uk (Becker, Bernd) Date: Mon, 14 Jun 2010 11:47:28 +0100 Subject: [gradsusr] Vector graphics output Message-ID: Hello! how can I create vector graphics from Grads? Something that works well with google maps etc. Thanks! Bernd. -- Bernd Becker Climate Impacts Product Development Met Office Hadley Centre FitzRoy Road Exeter Devon EX1 3PB United Kingdom Tel.: +44 (0) 1392 884511 Fax: +44 (0)870 900 5050 E-mail:bernd.becker at metoffice.gov.uk - http://www.metoffice.gov.uk From bill_reilly at compuserve.com Mon Jun 14 07:01:54 2010 From: bill_reilly at compuserve.com (Bill Reilly) Date: Mon, 14 Jun 2010 13:01:54 +0200 Subject: [gradsusr] Vector graphics output In-Reply-To: References: Message-ID: <4C160C22.4000002@compuserve.com> Bernd: Use the "set kml" command with "set gxout kml"... the output in KML format is intended for use with GIS tools such as Google Earth... Bill -- Bill Reilly (+34) 686-110-748 bill at passageweather.com www.passageweather.com On 6/14/2010 12:47 PM, Becker, Bernd wrote: > Hello! > > how can I create vector graphics from Grads? > Something that works well with google maps etc. > > Thanks! > > Bernd. > > -- > Bernd Becker Climate Impacts Product Development > Met Office Hadley Centre FitzRoy Road Exeter Devon EX1 3PB United > Kingdom > Tel.: +44 (0) 1392 884511 Fax: +44 (0)870 900 5050 > E-mail:bernd.becker at metoffice.gov.uk - http://www.metoffice.gov.uk > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > From gibiesgeorge at gmail.com Mon Jun 14 07:40:45 2010 From: gibiesgeorge at gmail.com (gibies george) Date: Mon, 14 Jun 2010 17:10:45 +0530 Subject: [gradsusr] Redefine the time step of a GrADS data variable Message-ID: Hello friends, I have a problem in redefining the time step of a data variable. For that I tried the following script ( it have some script variables which can be find from attached file.) 'set t 1 '1+yrn-yr1 'define i' yr=1 while (yr<(1+yrn-yr1)) 'set t 'yr 'i = ssn(time = 'd1''mmm1''(yr1+yr-1)') yr=yr+1 endwhile This modification in my script give the following error message. Syntax Error Error occurred on line 134 In file SMTSIndex2.gs I expect that the error is from *'i = ssn(time = 'd1''mmm1''(yr1+yr-1)')* Can anybody tell a way to solve my problem in correct syntax. My real need is to get a variable with annual time step while I am having a variable (ssn) with daily time step which repeats the same value for all days of same year. Thanking you in advance. On 5 June 2010 10:52, gibies george wrote: > > From a daily data I have calculated seasonal mean using ave function. > 'define ssn=ave(ts,time='d1''mmm1',time='dn''mmmn')' > > Now how can I redefine the time step of 'ssn' variable to yearly. Presently > it is having daily timestep. > > * > > Interactive grads script for Seasonal Mean Time series Index.* > > I am attaching an interactive GrADS script, which I have developed just > now. This script gives you a seasonal mean climatology (spatial plot) of any > parameter you specified at run time. Then you can create a box with the > mouse in you pc. After that you will get a box averaged seasonal mean time > series Index of the specified parameter. > > A smple output (index.pdf) also is attached. > > > > > -- > Gibies George,CSIR-RF, > Climate and Global Modelling Division, > Indian Institute of Tropical Meteorology, > Dr. Homi Bhabha Road, > NCL (P. O.), Pashan, > Pune 411008, India. > > http://sites.google.com/site/gibiesge/ > > Think about the environment. Please don't print this e-mail unless it is > necessary. > -- Gibies George,CSIR-RF, Climate and Global Modelling Division, Indian Institute of Tropical Meteorology, Dr. Homi Bhabha Road, NCL (P. O.), Pashan, Pune 411008, India. http://sites.google.com/site/gibiesge/ Think about the environment. Please don't print this e-mail unless it is necessary. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/fa810718/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: SMTSIndex.gs Type: application/octet-stream Size: 4031 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100614/fa810718/attachment-0001.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: index.pdf Type: application/pdf Size: 10716 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100614/fa810718/attachment-0001.pdf From huber.gilt at igp.gob.pe Mon Jun 14 10:43:54 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Mon, 14 Jun 2010 09:43:54 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006141451.o5EEp6uo016896@geo.igp.gob.pe> Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/907fa8e1/attachment-0001.html From jma at cola.iges.org Mon Jun 14 10:52:05 2010 From: jma at cola.iges.org (Jennifer Adams) Date: Mon, 14 Jun 2010 10:52:05 -0400 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006141451.o5EEp6uo016896@geo.igp.gob.pe> References: <201006141451.o5EEp6uo016896@geo.igp.gob.pe> Message-ID: Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/ hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: > Jennifer, > > Thank you for your help, I haven?t compiled the hdf4 library yet, > because I have found the message ?Unsatisfied symbol ?sqrt? in file > hdiff_array.o?, I had thought that the math library was not specify > ?-lm?. Could you tell me how can I solve this problem? (The error > message is in the end) > > Please help me, > Best regards, > Huber > > gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/ > huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o > hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o > hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../ > libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg - > lz -lnsl > ld: Unsatisfied symbol "sqrt" in file hdiff_array.o > 1 errors. > collect2: ld returned 1 exit status > make[2]: *** [hdiff] Error 1 > make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/ > mfhdf/hdiff' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/ > mfhdf' > make: *** [all-recursive] Error 1 > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org > ] En nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 19:34 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > > On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: > > > Jennifer, > > Sorry, I can?t understand the patch for gasdf.c, > > Change this code block: > > > gaint read_metadata (struct gafile *pfi) { > struct gavar *pvar; > gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; > size_t sz,size=0; > #if USEHDF ==1 > int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; > int32 dim_sizes[H4_MAX_VAR_DIMS],rank; > char sdsname[H4_MAX_NC_NAME+1]; > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; > #endif > > > To this code block instead: > > gaint read_metadata (struct gafile *pfi) { > struct gavar *pvar; > gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; > size_t sz,size=0; > char name[300]; > #if USEHDF ==1 > int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; > int32 dim_sizes[H4_MAX_VAR_DIMS],rank; > char sdsname[H4_MAX_NC_NAME+1]; > char dimname[H4_MAX_NC_NAME+1]; > #endif > > > > > > but according with to suggest I going to compile hdf4. > Yes, you can also build wtih hdf4 -- but you must use the --disable- > netcdf option when compiling that library. > > --Jennifer > > > Thank you > Best regards > Huber > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org > ] En nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 16:48 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > That is a bug that occurs when you build with netcdf but without > hdf4. Here is the patch for gasdf.c : > > # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c > 2169d2168 > < char name[300]; > 2174c2173 > < char dimname[H4_MAX_NC_NAME+1]; > --- > > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; > > > > On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: > > > > Hello Jennifer, > > Thanks you for your help, I just enabled the netcdf option but now > after make command, akin the error message: > > > gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../ > supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/ > include/hdf -g -O2 -c gasdf.c > gasdf.c: In function 'read_metadata': > gasdf.c:2278: error: 'name' undeclared (first use in this function) > gasdf.c:2278: error: (Each undeclared identifier is reported only once > gasdf.c:2278: error: for each function it appears in.) > make[2]: *** [gasdf.o] Error 1 > make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > make[1]: *** [all] Error 2 > make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > make: *** [all-recursive] Error 1 > > > How can I fix this undeclared ?name?? > > Please help me, > > Best regards, > Huber > > > De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org > ] En nombre de Jennifer Adams > Enviado el: viernes, 11 de junio de 2010 13:37 > Para: GrADS Users Forum > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > > On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: > > > > > Hello, > > I?m trying to build grads with netcdf option enable, after I > configured the grads with this command: > > ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf- > include=/home/huber/grads/supplibs/include/netcdf > config.out > > You should not need to specify any configure options (other than -- > prefix) to get netcdf support. I did not write any code to support > the "--with-netcdf-include" option... > > > > > > I had the following message that ludunits library is not found: > > Checking in supplibs for libraries to support netcdf-4 ... > checking for udunits.h... (cached) yes > checking for utInit in -ludunits... (cached) no > - netcdf-4 disabled > > Then, I tried to build the source ldudunits library with the make > command, and also I had this error: > > cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/ > data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/ > udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/ > misc -ludport -ly -lm > (Bundled) cc: warning 922: "-O" is unsupported in the bundled > compiler, ignored. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/lib': use +help for online documentation. > (Bundled) cc: warning 901: unknown option: `-R/data/hoop/ > udunits-1.11.7/src/port/misc': use +help for online documentation. > ld: Can't find library for -ludunits > Fatal error. > > Why the compilation needs the ludunits library, I was thought this > library will be the output? > > What you're trying to build here is a utility called 'udunits' -- > that is something that is built along with the library, but it is > not necessary for GrADS. > > Look for a file called libudunits.a -- that is what GrADS needs -- > and put it in your $SUPPLIBS/lib location. > > --Jennifer > > >> >> >> Please help me >> Best regards, >> >> Huber Paul Gilt Lopez >> IGP-Peru >> >> >> >> >> >> >> >> >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr > > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- > Jennifer M. Adams > IGES/COLA > 4041 Powder Mill Road, Suite 302 > Calverton, MD 20705 > jma at cola.iges.org > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/4eb832fb/attachment-0001.html From Huddleston at cira.colostate.edu Mon Jun 14 10:56:51 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Mon, 14 Jun 2010 07:56:51 -0700 Subject: [gradsusr] combined files In-Reply-To: <403531.99111.qm@web55503.mail.re4.yahoo.com> References: <403531.99111.qm@web55503.mail.re4.yahoo.com> Message-ID: Cellyn, Make sure your CTL file has TDEF clearly defined for the combined time frame. I have three 24 hour netCDF files combined into one file and my TDEF line is tdef 72 linear 00:00Z23apr2006 1hr Then, you can set t to 15, e.g. set t 15 d variable John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of cellyn lee Sent: Monday, June 14, 2010 2:58 AM To: gradsusr at gradsusr.org Subject: [gradsusr] combined files hi, Im using ncecat function to combine 30 files into one netcdf file, which the timestep should be 30. but when I try ncdump then it shows the 'record' is 30 but nt tsize. so how I dsiplay the figure of lets say 15th day? thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/9e27169b/attachment.html From Charles.Seman at noaa.gov Mon Jun 14 11:09:08 2010 From: Charles.Seman at noaa.gov (Charles Seman) Date: Mon, 14 Jun 2010 11:09:08 -0400 Subject: [gradsusr] Output file is not written In-Reply-To: References: Message-ID: <4C164614.7050206@noaa.gov> Dear Geeta, Try rc=write('/testuser/model/abc.dat',tmpbng,append) Hope this helps, Chuck Geeta Geeta wrote: > Dear All, > > I am running this following grads script for extracting the FORECAST > temperature for a particular lat/lon. > This script opens this grads template ctl file and the data files. > 'reinit' > ''open /temp/WORK/RUN00/wrf-outp_d01.ctl' > 'set x 77.5' > 'set y 12.5' > 'set gxout print' > 'set prnopts %1.2f' > ts=1 > while (ts=52) > 'd (t2(t='ts')-273.16)' > tmpbng=sublin(result,1) > rc=write(/testuser/model/abc.dat,tmpbng,append) > ts=ts+1 > endwhile > On running the grads, > ga-> run t2avg.gs > No hardcopy metafile open > All files closed; all defined objects released > All GrADS attributes have been reinitialized > > This scripts is RUN OK. But No output file is created. > Kindly suggest. > geeta > > > > > From: gradsusr-request at gradsusr.org > > Subject: gradsusr Digest, Vol 4, Issue 13 > > To: gradsusr at gradsusr.org > > Date: Fri, 11 Jun 2010 17:26:55 -0400 > > > > Send gradsusr mailing list submissions to > > gradsusr at gradsusr.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://gradsusr.org/mailman/listinfo/gradsusr > > or, via email, send a message with subject or body 'help' to > > gradsusr-request at gradsusr.org > > > > You can reach the person managing the list at > > gradsusr-owner at gradsusr.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of gradsusr digest..." > > > > > > Today's Topics: > > > > 1. Re: unsupported --with-jpeg option in hdf5 configure file > > (Jennifer Adams) > > 2. Re: Point Vertical Cross-Section to Text ouput (Stephen McMillan) > > 3. Re: Enable netcdf 4.1.1 option in grads configure file > > (Huber Pa?l Gilt L?pez) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Fri, 11 Jun 2010 14:39:00 -0400 > > From: Jennifer Adams > > Subject: Re: [gradsusr] unsupported --with-jpeg option in hdf5 > > configure file > > To: GrADS Users Forum > > Message-ID: > > Content-Type: text/plain; charset="windows-1252" > > > > Yes, that is my mistake, although it is harmless. The HDF4 library > > uses jpeg, but hdf5 does not, and I accidentally left it in my ./ > > configure command. > > --Jennifer > > > > > > On Jun 10, 2010, at 11:15 AM, Huber Pa?l Gilt L?pez wrote: > > > > > Hello Everybody, > > > > > > I?m trying to compile the hdf5, supplemental library, but in the > > > documentation file (http://iges.org/grads/gadoc/supplibs > > > ), say to configure with the command: > > > cd $HOME/supplibs/src/ > > > tar xvfz tarfiles/hdf5-1.8.4-patch1.tar.gz > > > cd hdf5-1.8.4-patch1/ > > > ./configure --disable-shared --disable-fortran \ > > > --with-zlib=$HOME/supplibs/src/zlib-1.2.3 \ > > > --with-jpeg=$HOME/supplibs/src/jpeg-6b \ > > > --with-szlib=$HOME/supplibs/src/szip-2.1 \ > > > --prefix=$HOME/supplibs/src/hdf5-1.8.4-patch1 > > > make > > > make install > > > cp ./lib/libhdf5.a $HOME/supplibs/lib > > > cp ./lib/libhdf5_hl.a $HOME/supplibs/lib > > > mkdir $HOME/supplibs/include/hdf5 > > > cp ./include/*.h $HOME/supplibs/include/hdf5/ > > > > > > Then throws the warning, hdf5 don?t need jpeg libraries? > > > > > > configure: WARNING: unrecognized options: --with-jpeg > > > configure: WARNING: unrecognized options: --with-jpeg > > > > > > Thanks a lot, > > > > > > Best regards, > > > Huber > > > _______________________________________________ > > > gradsusr mailing list > > > gradsusr at gradsusr.org > > > http://gradsusr.org/mailman/listinfo/gradsusr > > > > -- > > Jennifer M. Adams > > IGES/COLA > > 4041 Powder Mill Road, Suite 302 > > Calverton, MD 20705 > > jma at cola.iges.org > > > > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > http://gradsusr.org/pipermail/gradsusr/attachments/20100611/2493cd1f/attachment-0001.html > > > > > ------------------------------ > > > > Message: 2 > > Date: Fri, 11 Jun 2010 14:48:26 -0400 > > From: Stephen McMillan > > Subject: Re: [gradsusr] Point Vertical Cross-Section to Text ouput > > To: GrADS Users Forum > > Message-ID: > > > > Content-Type: text/plain; charset="iso-8859-1" > > > > Justin, > > Attached script may accomplish what you want. It is for a single > grid point > > (-76, 40) and timestep (5). You would need to edit the variable > names, add > > additional while loops for time, location, etc. I hope it's what you > had in > > mind. I also included sample output from this script, using today's > 12z GFS > > run. > > > > Stephen McMillan > > > > On Fri, Jun 11, 2010 at 12:08 PM, Justin Traiteur < > > jtraite2 at atmos.illinois.edu> wrote: > > > > > Does anybody know how to take a vertical sounding of a lat lon > > > location of an analysis map and output the values at each vertical > > > level to a text document? I will need temperature, pressure, U, V, > > > and Specific humidity exported into a text file in order to be > > > ingested into the WRF. > > > > > > Thanks! > > > Justin > > > _______________________________________________ > > > gradsusr mailing list > > > gradsusr at gradsusr.org > > > http://gradsusr.org/mailman/listinfo/gradsusr > > > > > > > *************************************************** > > The information contained in this e-mail message > > is intended only for the use of the recipient(s) > > named above and may contain information that is > > privileged, confidential, and/or proprietary. > > If you are not the intended recipient, you may not > > review, copy or distribute this message. If you have > > received this communication in error, please notify > > the sender immediately by e-mail, and delete the original message. > > *************************************************** > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > http://gradsusr.org/pipermail/gradsusr/attachments/20100611/646b4357/attachment-0001.html > > > -------------- next part -------------- > > tmp(c) u(m/s) v(m/s) plev(mb) > > 22.54 -1.5 3.6 1000 > > 21.84 -1.3 5.0 975 > > 19.74 -0.7 4.7 950 > > 17.54 0.2 3.7 925 > > 15.64 1.8 2.0 900 > > 14.34 4.1 -0.7 875 > > 13.34 6.5 -3.9 850 > > 12.44 7.8 -6.9 825 > > 11.24 6.9 -8.5 800 > > 10.24 5.5 -8.4 775 > > 8.84 5.6 -8.2 750 > > 7.14 6.5 -8.5 725 > > 5.34 7.1 -9.3 700 > > 3.94 7.1 -9.7 675 > > 3.34 8.3 -9.2 650 > > 2.24 9.2 -8.7 625 > > 0.94 9.8 -8.1 600 > > -0.06 9.6 -7.8 575 > > -1.46 8.2 -8.7 550 > > -2.86 6.4 -9.6 525 > > -4.36 4.4 -10.0 500 > > -7.26 3.8 -10.9 475 > > -10.16 3.7 -11.8 450 > > -13.16 4.2 -12.7 425 > > -16.46 6.8 -13.4 400 > > -19.86 8.2 -13.6 375 > > -23.86 8.4 -13.0 350 > > -28.66 8.3 -12.2 325 > > -33.36 9.8 -14.1 300 > > -38.16 10.6 -14.1 275 > > -43.46 10.8 -14.4 250 > > -48.96 10.5 -13.1 225 > > -54.96 14.4 -10.2 200 > > -60.66 17.9 -10.5 175 > > -64.36 12.1 -12.0 150 > > -67.06 3.0 -8.2 125 > > -67.16 4.0 -13.1 100 > > -61.96 -2.1 -6.6 70 > > -59.36 -8.1 -4.3 50 > > -51.96 -5.1 -1.2 30 > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: vertout.gs > > Type: application/octet-stream > > Size: 850 bytes > > Desc: not available > > Url : > http://gradsusr.org/pipermail/gradsusr/attachments/20100611/646b4357/attachment-0001.obj > > > > > ------------------------------ > > > > Message: 3 > > Date: Fri, 11 Jun 2010 16:24:19 -0500 > > From: Huber Pa?l Gilt L?pez > > Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > > file > > To: "'GrADS Users Forum'" > > Message-ID: <201006112131.o5BLVWs6015700 at geo.igp.gob.pe> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hello Jennifer, > > > > > > > > Thanks you for your help, I just enabled the netcdf option but now after > > make command, akin the error message: > > > > > > > > > > > > gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits > > -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 > > -I/usr/include/hdf -g -O2 -c gasdf.c > > > > gasdf.c: In function 'read_metadata': > > > > gasdf.c:2278: error: 'name' undeclared (first use in this function) > > > > gasdf.c:2278: error: (Each undeclared identifier is reported only once > > > > gasdf.c:2278: error: for each function it appears in.) > > > > make[2]: *** [gasdf.o] Error 1 > > > > make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > > > > make[1]: *** [all] Error 2 > > > > make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' > > > > make: *** [all-recursive] Error 1 > > > > > > > > > > > > How can I fix this undeclared ?name?? > > > > > > > > Please help me, > > > > > > > > Best regards, > > > > Huber > > > > > > > > > > > > _____ > > > > De: gradsusr-bounces at gradsusr.org > [mailto:gradsusr-bounces at gradsusr.org] En > > nombre de Jennifer Adams > > Enviado el: viernes, 11 de junio de 2010 13:37 > > Para: GrADS Users Forum > > Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure > file > > > > > > > > > > > > On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: > > > > > > > > > > > > Hello, > > > > > > > > I?m trying to build grads with netcdf option enable, after I > configured the > > grads with this command: > > > > > > > > ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf > > --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > > config.out > > > > > > > > You should not need to specify any configure options (other than > --prefix) > > to get netcdf support. I did not write any code to support the > > "--with-netcdf-include" option... > > > > > > > > > > > > > > > > I had the following message that ludunits library is not found: > > > > > > > > Checking in supplibs for libraries to support netcdf-4 ... > > > > checking for udunits.h... (cached) yes > > > > checking for utInit in -ludunits... (cached) no > > > > - netcdf-4 disabled > > > > > > > > Then, I tried to build the source ldudunits library with the make > command, > > and also I had this error: > > > > > > > > cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib > > -L/data/hoop/udunits-1.11.7/src/lib -ludunits > > -R/data/hoop/udunits-1.11.7/src/port/misc > > -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm > > > > (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, > > ignored. > > > > (Bundled) cc: warning 901: unknown option: > > `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online > documentation. > > > > (Bundled) cc: warning 901: unknown option: > > `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online > > documentation. > > > > ld: Can't find library for -ludunits > > > > Fatal error. > > > > > > > > Why the compilation needs the ludunits library, I was thought this > library > > will be the output? > > > > > > > > What you're trying to build here is a utility called 'udunits' -- > that is > > something that is built along with the library, but it is not > necessary for > > GrADS. > > > > > > > > Look for a file called libudunits.a -- that is what GrADS needs -- > and put > > it in your $SUPPLIBS/lib location. > > > > > > > > --Jennifer > > > > > > > > > > > > > > > > > > > > > > > > Please help me > > > > Best regards, > > > > > > > > Huber Paul Gilt Lopez > > > > IGP-Peru > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > gradsusr mailing list > > gradsusr at gradsusr.org > > http://gradsusr.org/mailman/listinfo/gradsusr > > > > > > > > -- > > > > Jennifer M. Adams > > > > IGES/COLA > > > > 4041 Powder Mill Road, Suite 302 > > > > Calverton, MD 20705 > > > > jma at cola.iges.org > > > > > > > > > > > > > > > > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > http://gradsusr.org/pipermail/gradsusr/attachments/20100611/1031c56a/attachment.html > > > > > ------------------------------ > > > > _______________________________________________ > > gradsusr mailing list > > gradsusr at gradsusr.org > > http://gradsusr.org/mailman/listinfo/gradsusr > > > > > > End of gradsusr Digest, Vol 4, Issue 13 > > *************************************** > > ------------------------------------------------------------------------ > Manage your finance and manage money through MSN Money Special Drag n' > drop > ------------------------------------------------------------------------ > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > -- Please note that Charles.Seman at noaa.gov should be considered my NOAA email address, not cjs at gfdl.noaa.gov. ******************************************************************** Charles Seman Charles.Seman at noaa.gov U.S. Department of Commerce / NOAA / OAR Geophysical Fluid Dynamics Laboratory voice: (609) 452-6547 201 Forrestal Road fax: (609) 987-5063 Princeton, NJ 08540-6649 http://www.gfdl.noaa.gov/~cjs/ ******************************************************************** "The contents of this message are mine personally and do not reflect any official or unofficial position of the United States Federal Government, the United States Department of Commerce, or NOAA." From fishcivilmu at yahoo.com Mon Jun 14 11:17:04 2010 From: fishcivilmu at yahoo.com (FISSEHA G. BERHANE) Date: Mon, 14 Jun 2010 08:17:04 -0700 (PDT) Subject: [gradsusr] extracting point data from amy .nc files Message-ID: <917244.22922.qm@web45216.mail.sp1.yahoo.com> Dear users, I have?.nc files that are 6 hourly for? two years. How can i extract point data?for the two years?from all 6hourly data at once? thanks in advance, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/17718d4e/attachment.html From Huddleston at cira.colostate.edu Mon Jun 14 12:40:46 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Mon, 14 Jun 2010 09:40:46 -0700 Subject: [gradsusr] extracting point data from amy .nc files In-Reply-To: <917244.22922.qm@web45216.mail.sp1.yahoo.com> References: <917244.22922.qm@web45216.mail.sp1.yahoo.com> Message-ID: Fisseha Use the ncecat command from the NCO Operators http://nco.sourceforge.net/ to concatenate the 2920 files (365 * 2 * 4) together into one file. If the file is too big, you can use the ncks command from the operators to select out one or more parameters and then concatenate them into one file. Set up a CTL file for the one big file. Establish the TDEF line to correspond to the concatenated data, e.g. TDEF 2920 linear 00z1jan2006 6hr You can then display an average of the point data as follows: d ave(variable,t=1,t=2920) where variable is the name in your CTL file for your parameter. There probably are other ways to solve this; however, this will get you started looking at the data. John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of FISSEHA G. BERHANE Sent: Monday, June 14, 2010 9:17 AM To: gradsusr at gradsusr.org Subject: [gradsusr] extracting point data from amy .nc files Dear users, I have .nc files that are 6 hourly for two years. How can i extract point data for the two years from all 6hourly data at once? thanks in advance, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/441306e0/attachment-0001.html From huber.gilt at igp.gob.pe Mon Jun 14 12:57:29 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Mon, 14 Jun 2010 11:57:29 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006141704.o5EH4gIg020445@geo.igp.gob.pe> Jennifer ? Yes, I did. I got libdf.a and libmfhdf.a, so I ran ./configure ?prefix=/opt/grads-2.0.a8/ and it is ok, but after run make command I have many error of ?Unsatisfied symbol?, I send you a file with the complete make output in window and unix formats. I think that I don?t have some library or need special flag to setup? Please help me, Best regards, --Huber ld: Unsatisfied symbol "SSL_library_init" in file ../../supplibs/lib/libcurl.a[ssluse.o] ld: Unsatisfied symbol "MD4_Init" in file ../../supplibs/lib/libcurl.a[http_ntlm.o] ld: Unsatisfied symbol "MD5_Init" in file ../../supplibs/lib/libcurl.a[md5.o] ld: Unsatisfied symbol "SSL_get_certificate" in file ../../supplibs/lib/libcurl.a[ssluse.o] ld: Unsatisfied symbol "PEM_write_bio_X509" in file ../../supplibs/lib/libcurl.a[ssluse.o] (too many lines) ld: Unsatisfied symbol "ENGINE_init" in file ../../supplibs/lib/libcurl.a[ssluse.o] ld: Unsatisfied symbol "ENGINE_free" in file ../../supplibs/lib/libcurl.a[ssluse.o] ld: Unsatisfied symbol "ENGINE_set_default" in file ../../supplibs/lib/libcurl.a[ssluse.o] ld: Unsatisfied symbol "X509_NAME_ENTRY_get_data" in file ../../supplibs/lib/libcurl.a[ssluse.o] 136 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/690ddad1/attachment-0001.html From huber.gilt at igp.gob.pe Mon Jun 14 13:00:52 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Mon, 14 Jun 2010 12:00:52 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006141708.o5EH840A020547@geo.igp.gob.pe> Jennifer ? Yes, I did. I got libdf.a and libmfhdf.a, so I ran ./configure ?prefix=/opt/grads-2.0.a8/ and it is ok, but after run make command I have many error of ?Unsatisfied symbol?, I send you a file with the complete make output in window and unix formats. I think that I don?t have some library or need special flag to setup? Please help me, Best regards, --Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/413d1452/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: make.out.win Type: application/octet-stream Size: 19417 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100614/413d1452/attachment-0002.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: make.out.unix Type: application/octet-stream Size: 19417 bytes Desc: not available Url : http://gradsusr.org/pipermail/gradsusr/attachments/20100614/413d1452/attachment-0003.obj From Huddleston at cira.colostate.edu Mon Jun 14 13:07:27 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Mon, 14 Jun 2010 10:07:27 -0700 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006141708.o5EH840A020547@geo.igp.gob.pe> References: <201006141708.o5EH840A020547@geo.igp.gob.pe> Message-ID: Huber, You can manually add the "-lm" option to the end of the link line just after the "-lnsl" and it will then include the sqrt() function. Either edit the Makefile or create s shell script with the link line and execute it in the src directory. John John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 11:01 AM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Jennifer - Yes, I did. I got libdf.a and libmfhdf.a, so I ran ./configure -prefix=/opt/grads-2.0.a8/ and it is ok, but after run make command I have many error of 'Unsatisfied symbol', I send you a file with the complete make output in window and unix formats. I think that I don't have some library or need special flag to setup? Please help me, Best regards, --Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven't compiled the hdf4 library yet, because I have found the message 'Unsatisfied symbol "sqrt" in file hdiff_array.o', I had thought that the math library was not specify '-lm'. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can't understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared 'name'? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I'm trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure --prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/65d6c5bb/attachment-0001.html From jtraite2 at atmos.illinois.edu Mon Jun 14 15:46:39 2010 From: jtraite2 at atmos.illinois.edu (Justin Traiteur) Date: Mon, 14 Jun 2010 13:46:39 -0600 Subject: [gradsusr] Writing to multiple output files Message-ID: <2DB08AA3-E287-4D9C-8878-0ABD268C8BC2@atmos.illinois.edu> I am wondering if anyone knows how to write a GrADS script to write to multiple output files. Currently the code only writes to one file for one time only. I have a time series that needs to be broken into different output files. I have 240 different times to write to and would rather not do this by hand. Below is a copy of my current script. Thanks, Justin #GrADS script to output "sounding" values to a text file #SMcMillan, 6/11/2010 #Assumes variables tmpprs, ugrdprs, vgrdprs available # outfile='output.rtf' 'set x 1';'set y 1';'set z 1';'set t 1' zlev=1;ts=1 lo=3;la=3 while(zlev<=31) 'd hgtprs(t='ts',lon='lo',lat='la',z='zlev')';val1=subwrd(result, 4);hgt=math_format('%9.0f',val1) 'd ugrdprs(t='ts',lon='lo',lat='la',z='zlev')';val2=subwrd(result, 4);u=math_format('%9.1f',val2) 'd vgrdprs(t='ts',lon='lo',lat='la',z='zlev')';val3=subwrd(result, 4);v=math_format('%9.1f',val3) 'd pressfc(t='ts',lon='lo',lat='la')';val4=subwrd(result, 4);prs=math_format('%9.0f',val4) 'd lev(z='zlev')';plev=subwrd(result,4);val5=subwrd(result, 4);plev=math_format('%9.0f',val5) 'd tmpprs(t='ts',lon='lo',lat='la',z='zlev')';val6=subwrd(result, 4);tmp=math_format('%9.1f', val6) "set z " zlev 'd tmpprs*pow((1000/lev),0.286)';val7=subwrd(result, 4);theta=math_format('%9.1f',val7) 'd rhprs/100*621.97*(6.11*pow(10,(7.5*(tmpprs-273.15))/(237.7+ (tmpprs-273.15)))/(lev-(6.11*pow(10,(7.5*(tmpprs-273.15))/(237.7+ (tmpprs-273.15))))))/1000';val8=subwrd(result, 4);mr=math_format('%9.6f',val8) vals=hgt%u%v%theta%mr%prs;say vals dummy=write(outfile,vals) zlev=zlev+1 dummy=close(outfile) endwhile say 'Files written to 'outfile From huber.gilt at igp.gob.pe Mon Jun 14 15:53:20 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Mon, 14 Jun 2010 14:53:20 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006142000.o5EK0Xh9025318@geo.igp.gob.pe> Hello Jennifer, I want to compile de grads, but I don?t know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/b19c9e4c/attachment-0001.html From nztideman at yahoo.co.nz Mon Jun 14 16:49:40 2010 From: nztideman at yahoo.co.nz (Derek Goring) Date: Mon, 14 Jun 2010 13:49:40 -0700 (PDT) Subject: [gradsusr] NOMADS Servers down? Message-ID: <371553.82724.qm@web53905.mail.re2.yahoo.com> I have not been able to get into any of the NOMADS servers for days. Nor for that matter anywhere in: http://nomads.ncdc.noaa.gov/ Does anyone know what is going on? ________________ Derek Goring Mulgor Consulting Ltd 24 Brockworth Place Christchurch, New Zealand Phone: 64 3 942 5452 Mobile: 64 212 777 639 Website: www.mulgor.co.nz -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/111c69b6/attachment.html From Huddleston at cira.colostate.edu Mon Jun 14 16:59:55 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Mon, 14 Jun 2010 13:59:55 -0700 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006142000.o5EK0Xh9025318@geo.igp.gob.pe> References: <201006142000.o5EK0Xh9025318@geo.igp.gob.pe> Message-ID: Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don't know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven't compiled the hdf4 library yet, because I have found the message 'Unsatisfied symbol "sqrt" in file hdiff_array.o', I had thought that the math library was not specify '-lm'. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can't understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared 'name'? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I'm trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure --prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/fa195a83/attachment-0001.html From huber.gilt at igp.gob.pe Mon Jun 14 17:40:12 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Mon, 14 Jun 2010 16:40:12 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006142147.o5ELlOki028602@geo.igp.gob.pe> Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I?m building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don?t know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/5b8f843b/attachment-0001.html From jimp at hawaii.edu Mon Jun 14 17:53:05 2010 From: jimp at hawaii.edu (James T. Potemra) Date: Mon, 14 Jun 2010 11:53:05 -1000 Subject: [gradsusr] Writing to multiple output files In-Reply-To: <2DB08AA3-E287-4D9C-8878-0ABD268C8BC2@atmos.illinois.edu> References: <2DB08AA3-E287-4D9C-8878-0ABD268C8BC2@atmos.illinois.edu> Message-ID: <4C16A4C1.3080008@hawaii.edu> Hi Justin: Not sure if I understand this, but you can just make the output file name change with time, e.g., put the statement " outfile='output.rtf' " inside the loop, and change it to something like the following (assume the index i is for each time step): i = 1 while ( i<=imax) 'set t 'i outfile = 'output'%i'.rtf' i = i + 1 .... endwhile This will create a file called "output1.rft' for the first time (i=1), "output2.rtf" for the second time (t=2) and so on. Jim Justin Traiteur wrote: > I am wondering if anyone knows how to write a GrADS script to write to > multiple output files. Currently the code only writes to one file for > one time only. I have a time series that needs to be broken into > different output files. I have 240 different times to write to and > would rather not do this by hand. Below is a copy of my current script. > > > > Thanks, > > Justin > > > > > > > > > > #GrADS script to output "sounding" values to a text file > > #SMcMillan, 6/11/2010 > > #Assumes variables tmpprs, ugrdprs, vgrdprs available > > # > > outfile='output.rtf' > > 'set x 1';'set y 1';'set z 1';'set t 1' > > zlev=1;ts=1 > > lo=3;la=3 > > while(zlev<=31) > > 'd hgtprs(t='ts',lon='lo',lat='la',z='zlev')';val1=subwrd(result, > 4);hgt=math_format('%9.0f',val1) > > 'd ugrdprs(t='ts',lon='lo',lat='la',z='zlev')';val2=subwrd(result, > 4);u=math_format('%9.1f',val2) > > 'd vgrdprs(t='ts',lon='lo',lat='la',z='zlev')';val3=subwrd(result, > 4);v=math_format('%9.1f',val3) > > 'd pressfc(t='ts',lon='lo',lat='la')';val4=subwrd(result, > 4);prs=math_format('%9.0f',val4) > > 'd lev(z='zlev')';plev=subwrd(result,4);val5=subwrd(result, > 4);plev=math_format('%9.0f',val5) > > 'd tmpprs(t='ts',lon='lo',lat='la',z='zlev')';val6=subwrd(result, > 4);tmp=math_format('%9.1f', val6) > > "set z " zlev > > 'd tmpprs*pow((1000/lev),0.286)';val7=subwrd(result, > 4);theta=math_format('%9.1f',val7) > > 'd rhprs/100*621.97*(6.11*pow(10,(7.5*(tmpprs-273.15))/(237.7+ > (tmpprs-273.15)))/(lev-(6.11*pow(10,(7.5*(tmpprs-273.15))/(237.7+ > (tmpprs-273.15))))))/1000';val8=subwrd(result, > 4);mr=math_format('%9.6f',val8) > > > vals=hgt%u%v%theta%mr%prs;say vals > > dummy=write(outfile,vals) > > zlev=zlev+1 > > dummy=close(outfile) > > endwhile > > say 'Files written to 'outfile > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > From cellyn_lee53 at yahoo.com Mon Jun 14 22:01:24 2010 From: cellyn_lee53 at yahoo.com (cellyn lee) Date: Mon, 14 Jun 2010 19:01:24 -0700 (PDT) Subject: [gradsusr] combined files In-Reply-To: Message-ID: <444766.52002.qm@web55502.mail.re4.yahoo.com> hi, thanks for your information, i solved my problem successfully. thanks!! --- On Mon, 14/6/10, Huddleston, John wrote: From: Huddleston, John Subject: Re: [gradsusr] combined files To: "GrADS Users Forum" Date: Monday, 14 June, 2010, 10:56 PM Cellyn, ? Make sure your CTL file has TDEF clearly defined for the combined time frame.? I have three 24 hour netCDF files combined into one file and my TDEF line is tdef 72? linear 00:00Z23apr2006 1hr ? Then, you can set t to 15, e.g. ? set t 15 d variable ? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere ? From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of cellyn lee Sent: Monday, June 14, 2010 2:58 AM To: gradsusr at gradsusr.org Subject: [gradsusr] combined files ? hi, ? Im using ncecat function to combine 30 files into one netcdf file, which the timestep should be 30. but when I try ncdump then it shows the 'record' is 30 but nt tsize. so how I dsiplay the figure of lets say 15th day? ? thanks! ? -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/22946900/attachment.html From smcmillan at planalytics.com Mon Jun 14 23:41:14 2010 From: smcmillan at planalytics.com (Stephen McMillan) Date: Mon, 14 Jun 2010 23:41:14 -0400 Subject: [gradsusr] Regridding/Replace Value Question In-Reply-To: <124401cb09b5$44596170$cd0c2450$@com> References: <101701cb090e$80140960$803c1c20$@com> <124401cb09b5$44596170$cd0c2450$@com> Message-ID: Andy, Yes, I understood your original question...using re() or similar process. The example steps listed in the 'set defval...' documentation will work with regridded fields as with others. Of course, you will need to display the defined regridded variable to set the scaling environment, in order to use the various query commands such as 'q xy2gr' (returns grid coords) and 'q xy2w' (returns lon-lat coordinates) in conjunction with the 'q pos' command. Use 'q defval...' to get the value at a grid, and 'set defval...' to change the value. Refer to Documentation Index for correct syntax and some examples. Stephen McMillan On Fri, Jun 11, 2010 at 6:27 PM, Andrew Revering wrote: > This is perfect -- EXCEPT -- that what I'm doing is actually using GrADS > (or maybe its OpenGrads, I'm not sure) to regrid the data into a new netCDF > file. I'm not using GrADS itself for display until after I've combined > several NetCDFs into one large NetCDF file. The point of this is so that I > can properly overlay data at the same points (radar data..overlaying > overlapping radar sites). > > > > ? so right now I'm looking at the data and choosing which value to use at a > specific coordinate given multiple radar sites, but I don't know that I can > identify what the coordinate is of the data point I'm looking at using re(). > Maybe I'm just not using it properly. > > > > What I want to do is know the actual coordinate so I can identify how far > away it is from the radar site, and then with that information decide if I > want to identify the return for that point as ground clutter and set its > value to 0. > > > > So in short?. I need something like defval, but I need to be able to do it > during the regridding process, not involving the display in GrADS. I want to > do it before I write out the final NetCDF. > > > > Thoughts? > > > > > > > > *From:* gradsusr-bounces at gradsusr.org [mailto: > gradsusr-bounces at gradsusr.org] *On Behalf Of *Stephen McMillan > *Sent:* Friday, June 11, 2010 7:00 AM > *To:* GrADS Users Forum > *Subject:* Re: [gradsusr] Regridding/Replace Value Question > > > > Andy, > > Check out the 'set defval...' command in the documentation index: > http://www.iges.org/grads/gadoc/gradcomdsetdefval.html > > I believe it will do what you want. > > > > Stephen McMillan > > On Thu, Jun 10, 2010 at 10:33 PM, Andrew Revering wrote: > > Is there a way to replace a grid value during the regridding process using > 're()' or similar function? > > > > I need to be able to return a specific coordinate (latitude/longitude) for > the point we're regridding, along with it's value and then be able to change > the value at that point. > > > > Andy > > > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > > > *************************************************** > > The information contained in this e-mail message > > is intended only for the use of the recipient(s) > > named above and may contain information that is > > privileged, confidential, and/or proprietary. > > If you are not the intended recipient, you may not > > review, copy or distribute this message. If you have > > received this communication in error, please notify > > the sender immediately by e-mail, and delete the original message. > > *************************************************** > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > *************************************************** The information contained in this e-mail message is intended only for the use of the recipient(s) named above and may contain information that is privileged, confidential, and/or proprietary. If you are not the intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify the sender immediately by e-mail, and delete the original message. *************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/8bafae5a/attachment.html From nztideman at yahoo.co.nz Mon Jun 14 23:47:48 2010 From: nztideman at yahoo.co.nz (Derek Goring) Date: Mon, 14 Jun 2010 20:47:48 -0700 (PDT) Subject: [gradsusr] NOMADS Servers down? In-Reply-To: <371553.82724.qm@web53905.mail.re2.yahoo.com> Message-ID: <914935.24652.qm@web53902.mail.re2.yahoo.com> It's OK. They all came back up again at about 1400 NZST (0200 GMT) today. ________________ Derek Goring Mulgor Consulting Ltd 24 Brockworth Place Christchurch, New Zealand Phone: 64 3 942 5452 Mobile: 64 212 777 639 Website: www.mulgor.co.nz --- On Tue, 15/6/10, Derek Goring wrote: From: Derek Goring Subject: [gradsusr] NOMADS Servers down? To: gradsusr at gradsusr.org Received: Tuesday, 15 June, 2010, 8:49 AM I have not been able to get into any of the NOMADS servers for days. Nor for that matter anywhere in: http://nomads.ncdc.noaa.gov/ Does anyone know what is going on? ________________ Derek Goring Mulgor Consulting Ltd 24 Brockworth Place Christchurch, New Zealand Phone: 64 3 942 5452 Mobile: 64 212 777 639 Website: www.mulgor.co.nz ? -----Inline Attachment Follows----- _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100614/bf0d71c5/attachment-0001.html From me at j0nes.de Tue Jun 15 03:25:06 2010 From: me at j0nes.de (Jonas Kaufmann) Date: Tue, 15 Jun 2010 09:25:06 +0200 Subject: [gradsusr] Writing own texts into file Message-ID: Hello, I am currently writing some data into text files via 'd tmp2m' dummy=write('myfile.txt', result, 1) Now I would like to add some custom information into this file, e.g. writing some comments in it. I tried something like 'say temperature' dummy=write('myfile.txt', result, 1) 'd tmp2m' dummy=write('myfile.txt', result, 1) ...but this failed. Is this possible, and if so, how can I do this? Best regards, Jonas Kaufmann From wendellrgf at yahoo.com.br Tue Jun 15 08:59:24 2010 From: wendellrgf at yahoo.com.br (Wendell Farias) Date: Tue, 15 Jun 2010 05:59:24 -0700 (PDT) Subject: [gradsusr] average of the multiple levels Message-ID: <768364.36224.qm@web50901.mail.re2.yahoo.com> Dear users, I have a file with CAPE in multiple levels (1000 to 100), varying in a grid. How can I to calculate the average considering all levels. I want the average of CAPE among 1000 to 100. I'm hoping for some suggestions For exemple: lon= -50 to -42 lat= -25 to -21 lev= 1000 to 100 Z= 1 to 19 Thank you advanced, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/e588d06e/attachment.html From Huddleston at cira.colostate.edu Tue Jun 15 10:39:29 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Tue, 15 Jun 2010 07:39:29 -0700 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006142147.o5ELlOki028602@geo.igp.gob.pe> References: <201006142147.o5ELlOki028602@geo.igp.gob.pe> Message-ID: Huber That is a good question. I remember building on HP/UX ten years ago and it was always difficult. Let's try another approach. I assume you've built the hdf library. Look under the hdf-4.2.5/mfhdf/xdr directory. Type 'make' and it will build the shared library; then, use the objects to make the static library. ar cruv libxdr.a *.o Copy the libxdr.a to your ${SUPPLIBS}/lib and link it into the GrADS link line using the option -lxdr John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 3:40 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I'm building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don't know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven't compiled the hdf4 library yet, because I have found the message 'Unsatisfied symbol "sqrt" in file hdiff_array.o', I had thought that the math library was not specify '-lm'. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can't understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared 'name'? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I'm trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure --prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/439b9089/attachment-0001.html From Huddleston at cira.colostate.edu Tue Jun 15 10:44:28 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Tue, 15 Jun 2010 07:44:28 -0700 Subject: [gradsusr] average of the multiple levels In-Reply-To: <768364.36224.qm@web50901.mail.re2.yahoo.com> References: <768364.36224.qm@web50901.mail.re2.yahoo.com> Message-ID: Wendell d ave(cape,z=1,z=19) John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Wendell Farias Sent: Tuesday, June 15, 2010 6:59 AM To: gradsusr at gradsusr.org Subject: [gradsusr] average of the multiple levels Dear users, I have a file with CAPE in multiple levels (1000 to 100), varying in a grid. How can I to calculate the average considering all levels. I want the average of CAPE among 1000 to 100. I'm hoping for some suggestions For exemple: lon= -50 to -42 lat= -25 to -21 lev= 1000 to 100 Z= 1 to 19 Thank you advanced, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/26b0bb3e/attachment.html From Charles.Seman at noaa.gov Tue Jun 15 11:21:10 2010 From: Charles.Seman at noaa.gov (Charles Seman) Date: Tue, 15 Jun 2010 11:21:10 -0400 Subject: [gradsusr] Writing own texts into file In-Reply-To: References: Message-ID: <4C179A66.3070906@noaa.gov> Jonas, Try something like: dummy=write('myfile.txt', 'temperature: 'result, 1) Hope this helps, Chuck Jonas Kaufmann wrote: > Hello, > > I am currently writing some data into text files via > > 'd tmp2m' > dummy=write('myfile.txt', result, 1) > > Now I would like to add some custom information into this file, e.g. > writing some comments in it. I tried something like > > 'say temperature' > dummy=write('myfile.txt', result, 1) > 'd tmp2m' > dummy=write('myfile.txt', result, 1) > > ...but this failed. Is this possible, and if so, how can I do this? > > Best regards, > Jonas Kaufmann > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > -- Please note that Charles.Seman at noaa.gov should be considered my NOAA email address, not cjs at gfdl.noaa.gov. ******************************************************************** Charles Seman Charles.Seman at noaa.gov U.S. Department of Commerce / NOAA / OAR Geophysical Fluid Dynamics Laboratory voice: (609) 452-6547 201 Forrestal Road fax: (609) 987-5063 Princeton, NJ 08540-6649 http://www.gfdl.noaa.gov/~cjs/ ******************************************************************** "The contents of this message are mine personally and do not reflect any official or unofficial position of the United States Federal Government, the United States Department of Commerce, or NOAA." From huber.gilt at igp.gob.pe Tue Jun 15 12:59:00 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Tue, 15 Jun 2010 11:59:00 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006151706.o5FH6Cj9015149@geo.igp.gob.pe> Hello John, Yes, I have built the hdf library, but I don?t have Makefile file neither configure file in this path, and also I have and others files like show above, Is there another way to build libxdr.a? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 9:39 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber That is a good question. I remember building on HP/UX ten years ago and it was always difficult. Let?s try another approach. I assume you?ve built the hdf library. Look under the hdf-4.2.5/mfhdf/xdr directory. Type ?make? and it will build the shared library; then, use the objects to make the static library. ar cruv libxdr.a *.o Copy the libxdr.a to your ${SUPPLIBS}/lib and link it into the GrADS link line using the option -lxdr John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 3:40 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I?m building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don?t know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/3e987479/attachment-0001.html From Huddleston at cira.colostate.edu Tue Jun 15 13:31:34 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Tue, 15 Jun 2010 10:31:34 -0700 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006151706.o5FH6Cj9015149@geo.igp.gob.pe> References: <201006151706.o5FH6Cj9015149@geo.igp.gob.pe> Message-ID: Huber, I sent a PDF document to your private email describing how to build all supplibs and GrADS. You should follow those steps in the order shown in the document. For the xdr library, do the following: gcc -I. -c *.c ar cruv libxdr.a ${SUPPLIBS}/lib/libjpeg.a xdr.o xdrfloat.o xdrstdio.o xdrarray.o cp libxdr.a ${SUPPLIBS}/lib If the libjpeg.a is not under $SUPPLIBS/lib then put the path to where it resides. John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Tuesday, June 15, 2010 10:59 AM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, Yes, I have built the hdf library, but I don't have Makefile file neither configure file in this path, and also I have and others files like show above, Is there another way to build libxdr.a? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 9:39 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber That is a good question. I remember building on HP/UX ten years ago and it was always difficult. Let's try another approach. I assume you've built the hdf library. Look under the hdf-4.2.5/mfhdf/xdr directory. Type 'make' and it will build the shared library; then, use the objects to make the static library. ar cruv libxdr.a *.o Copy the libxdr.a to your ${SUPPLIBS}/lib and link it into the GrADS link line using the option -lxdr John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 3:40 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I'm building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don't know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven't compiled the hdf4 library yet, because I have found the message 'Unsatisfied symbol "sqrt" in file hdiff_array.o', I had thought that the math library was not specify '-lm'. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can't understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared 'name'? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I'm trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure --prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/f38c3049/attachment-0001.html From andy at f5data.com Tue Jun 15 15:18:22 2010 From: andy at f5data.com (Andrew Revering) Date: Tue, 15 Jun 2010 14:18:22 -0500 Subject: [gradsusr] average of the multiple levels In-Reply-To: <768364.36224.qm@web50901.mail.re2.yahoo.com> References: <768364.36224.qm@web50901.mail.re2.yahoo.com> Message-ID: <1b1001cb0cbf$8668c0d0$933a4270$@com> I just want to make sure that you're really doing what you want to do? CAPE is an integration of values generally from the surface all the way to the top of the atmosphere or EL (Equilibrium Level) where CAPE becomes 0 again. You add up the values at each level to get the value known as CAPE. The only adjustment to this process is sometimes you mix the lower 100mb and then raise the parcel from those values as if they were the values at the surface when calculating the parcel temperature. If you know all that and you're goal is something else, ignore me. :) Andy From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Wendell Farias Sent: Tuesday, June 15, 2010 7:59 AM To: gradsusr at gradsusr.org Subject: [gradsusr] average of the multiple levels Dear users, I have a file with CAPE in multiple levels (1000 to 100), varying in a grid. How can I to calculate the average considering all levels. I want the average of CAPE among 1000 to 100. I'm hoping for some suggestions For exemple: lon= -50 to -42 lat= -25 to -21 lev= 1000 to 100 Z= 1 to 19 Thank you advanced, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/992281b1/attachment.html From jdduda at iastate.edu Tue Jun 15 15:42:18 2010 From: jdduda at iastate.edu (Jeffrey Duda) Date: Tue, 15 Jun 2010 14:42:18 -0500 Subject: [gradsusr] average of the multiple levels In-Reply-To: <1b1001cb0cbf$8668c0d0$933a4270$@com> References: <768364.36224.qm@web50901.mail.re2.yahoo.com> <1b1001cb0cbf$8668c0d0$933a4270$@com> Message-ID: Adding to what Andy has said...there is no such thing as vertically averaged CAPE. Jeff Duda On Tue, Jun 15, 2010 at 2:18 PM, Andrew Revering wrote: > I just want to make sure that you're really doing what you want to do? > > > > CAPE is an integration of values generally from the surface all the way to > the top of the atmosphere or EL (Equilibrium Level) where CAPE becomes 0 > again. You add up the values at each level to get the value known as CAPE. > > > > The only adjustment to this process is sometimes you mix the lower 100mb > and then raise the parcel from those values as if they were the values at > the surface when calculating the parcel temperature. > > > > If you know all that and you're goal is something else, ignore me. :) > > > > Andy > > > > *From:* gradsusr-bounces at gradsusr.org [mailto: > gradsusr-bounces at gradsusr.org] *On Behalf Of *Wendell Farias > *Sent:* Tuesday, June 15, 2010 7:59 AM > *To:* gradsusr at gradsusr.org > *Subject:* [gradsusr] average of the multiple levels > > > > Dear users, > > I have a file with CAPE in multiple levels (1000 to 100), varying in a > grid. How can I to calculate the average considering all levels. I want the > average of CAPE among 1000 to 100. I'm hoping for some suggestions > For exemple: > lon= -50 to -42 > lat= -25 to -21 > lev= 1000 to 100 Z= 1 to 19 > > Thank you advanced, > > > > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > > -- Jeff Duda Iowa State University Meteorology Graduate Student 3134 Agronomy Hall www.meteor.iastate.edu/~jdduda -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/510a16bf/attachment.html From huber.gilt at igp.gob.pe Tue Jun 15 16:40:35 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Tue, 15 Jun 2010 15:40:35 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006152047.o5FKll97021036@geo.igp.gob.pe> Hello John, I built the libxdr.a library, then exec the make command in grads source folder, the libxdr.a library resolve 9 of 10 Unsatisfied symbols, the last error is in the end. Maybe this symbol needs to include in libxdr.a, or is another library? Please help me, Best regards, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwm ap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabu fr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasd f.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplib s/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../s upplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../ ../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a . ./../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib /libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../suppl ibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm -lxdr ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] 1 errors. collect2: ld returned 1 exit status _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 12:32 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber, I sent a PDF document to your private email describing how to build all supplibs and GrADS. You should follow those steps in the order shown in the document. For the xdr library, do the following: gcc ?I. ?c *.c ar cruv libxdr.a ${SUPPLIBS}/lib/libjpeg.a xdr.o xdrfloat.o xdrstdio.o xdrarray.o cp libxdr.a ${SUPPLIBS}/lib If the libjpeg.a is not under $SUPPLIBS/lib then put the path to where it resides. John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Tuesday, June 15, 2010 10:59 AM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, Yes, I have built the hdf library, but I don?t have Makefile file neither configure file in this path, and also I have and others files like show above, Is there another way to build libxdr.a? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 9:39 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber That is a good question. I remember building on HP/UX ten years ago and it was always difficult. Let?s try another approach. I assume you?ve built the hdf library. Look under the hdf-4.2.5/mfhdf/xdr directory. Type ?make? and it will build the shared library; then, use the objects to make the static library. ar cruv libxdr.a *.o Copy the libxdr.a to your ${SUPPLIBS}/lib and link it into the GrADS link line using the option -lxdr John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 3:40 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I?m building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don?t know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/329fd49b/attachment-0001.html From Huddleston at cira.colostate.edu Tue Jun 15 17:11:35 2010 From: Huddleston at cira.colostate.edu (Huddleston, John) Date: Tue, 15 Jun 2010 14:11:35 -0700 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: <201006152047.o5FKll97021036@geo.igp.gob.pe> References: <201006152047.o5FKll97021036@geo.igp.gob.pe> Message-ID: Huber Sorry this is taking so long; hp/ux 32 bit is different than 64 bit. Remove the "-lxdr" option and add the "-lc" and possibly the "-lnsl" option if "-lc" doesn't work by itself. John John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Tuesday, June 15, 2010 2:41 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I built the libxdr.a library, then exec the make command in grads source folder, the libxdr.a library resolve 9 of 10 Unsatisfied symbols, the last error is in the end. Maybe this symbol needs to include in libxdr.a, or is another library? Please help me, Best regards, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwm ap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabu fr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasd f.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplib s/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../s upplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../ ../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a . ./../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib /libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../suppl ibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm -lxdr ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] 1 errors. collect2: ld returned 1 exit status ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 12:32 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber, I sent a PDF document to your private email describing how to build all supplibs and GrADS. You should follow those steps in the order shown in the document. For the xdr library, do the following: gcc -I. -c *.c ar cruv libxdr.a ${SUPPLIBS}/lib/libjpeg.a xdr.o xdrfloat.o xdrstdio.o xdrarray.o cp libxdr.a ${SUPPLIBS}/lib If the libjpeg.a is not under $SUPPLIBS/lib then put the path to where it resides. John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Tuesday, June 15, 2010 10:59 AM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, Yes, I have built the hdf library, but I don't have Makefile file neither configure file in this path, and also I have and others files like show above, Is there another way to build libxdr.a? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 9:39 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber That is a good question. I remember building on HP/UX ten years ago and it was always difficult. Let's try another approach. I assume you've built the hdf library. Look under the hdf-4.2.5/mfhdf/xdr directory. Type 'make' and it will build the shared library; then, use the objects to make the static library. ar cruv libxdr.a *.o Copy the libxdr.a to your ${SUPPLIBS}/lib and link it into the GrADS link line using the option -lxdr John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 3:40 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I'm building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don't know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven't compiled the hdf4 library yet, because I have found the message 'Unsatisfied symbol "sqrt" in file hdiff_array.o', I had thought that the math library was not specify '-lm'. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can't understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared 'name'? Please help me, Best regards, Huber ________________________________ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I'm trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure --prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/c990cf94/attachment-0001.html From huber.gilt at igp.gob.pe Tue Jun 15 17:42:06 2010 From: huber.gilt at igp.gob.pe (=?iso-8859-1?Q?Huber_Pa=FAl_Gilt_L=F3pez?=) Date: Tue, 15 Jun 2010 16:42:06 -0500 Subject: [gradsusr] Enable netcdf 4.1.1 option in grads configure file In-Reply-To: Message-ID: <201006152149.o5FLnILE022663@geo.igp.gob.pe> Hello John, Finally I have compiled the grads with netcdf. I remove the ?-lxdr? option and add the ?-lnsl? option. Thank you very much John and Jennifer Best regards Huber Paul Gilt Lopez IGP-Peru _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 16:12 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber Sorry this is taking so long; hp/ux 32 bit is different than 64 bit. Remove the ?-lxdr? option and add the ?-lc? and possibly the ?-lnsl? option if ?-lc? doesn?t work by itself. John John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Tuesday, June 15, 2010 2:41 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I built the libxdr.a library, then exec the make command in grads source folder, the libxdr.a library resolve 9 of 10 Unsatisfied symbols, the last error is in the end. Maybe this symbol needs to include in libxdr.a, or is another library? Please help me, Best regards, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwm ap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabu fr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasd f.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplib s/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../s upplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../ ../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a . ./../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib /libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../suppl ibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm -lxdr ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] 1 errors. collect2: ld returned 1 exit status _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 12:32 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber, I sent a PDF document to your private email describing how to build all supplibs and GrADS. You should follow those steps in the order shown in the document. For the xdr library, do the following: gcc ?I. ?c *.c ar cruv libxdr.a ${SUPPLIBS}/lib/libjpeg.a xdr.o xdrfloat.o xdrstdio.o xdrarray.o cp libxdr.a ${SUPPLIBS}/lib If the libjpeg.a is not under $SUPPLIBS/lib then put the path to where it resides. John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Tuesday, June 15, 2010 10:59 AM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, Yes, I have built the hdf library, but I don?t have Makefile file neither configure file in this path, and also I have and others files like show above, Is there another way to build libxdr.a? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: martes, 15 de junio de 2010 9:39 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber That is a good question. I remember building on HP/UX ten years ago and it was always difficult. Let?s try another approach. I assume you?ve built the hdf library. Look under the hdf-4.2.5/mfhdf/xdr directory. Type ?make? and it will build the shared library; then, use the objects to make the static library. ar cruv libxdr.a *.o Copy the libxdr.a to your ${SUPPLIBS}/lib and link it into the GrADS link line using the option -lxdr John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 3:40 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello John, I build in hp-ux, and I have the following libraries, which of them I will choose?. I?m building a applications of 32 bits. Thanks a lot, Huber # find / -name librpc* /usr/lib/hpux32/librpcsvc.so.1 /usr/lib/hpux32/librpcsec_gss.sl /usr/lib/hpux32/librpcsec_gss.so.1 /usr/lib/hpux32/librpcsoc.so /usr/lib/hpux32/librpcsoc.so.1 /usr/lib/hpux32/librpcsvc.so /usr/lib/hpux64/librpcsec_gss.sl /usr/lib/hpux64/librpcsec_gss.so.1 /usr/lib/hpux64/librpcsvc.so /usr/lib/hpux64/librpcsvc.so.1 /usr/lib/pa20_64/librpcsec_gss.1 /usr/lib/pa20_64/librpcsec_gss.sl /usr/lib/pa20_64/librpcsvc.1 /usr/lib/pa20_64/librpcsvc.sl /usr/lib/librpcsec_gss.1 /usr/lib/librpcsec_gss.sl /usr/lib/librpcsoc.1 /usr/lib/librpcsoc.sl /usr/lib/librpcsvc.1 /usr/lib/librpcsvc.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsec_gss.sl /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.1 /usr/ccs/pa/usr/lib/pa20_64/librpcsvc.sl /usr/ccs/pa/usr/lib/librpcsec_gss.1 /usr/ccs/pa/usr/lib/librpcsec_gss.sl /usr/ccs/pa/usr/lib/librpcsoc.1 /usr/ccs/pa/usr/lib/librpcsoc.sl /usr/ccs/pa/usr/lib/librpcsvc.1 /usr/ccs/pa/usr/lib/librpcsvc.sl _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Huddleston, John Enviado el: lunes, 14 de junio de 2010 16:00 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber The XDR functions are in the RPC library. These are originally from the SUN environment. If you have a librpc.a or a *rpc*.so somewhere under the /usr/lib or /usr/local/lib areas then add it to the link line, e.g. -lrpc What platform are you using to build GrADS? John Huddleston, PhD Cooperative Institute for Research in the Atmosphere From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] On Behalf Of Huber Pa?l Gilt L?pez Sent: Monday, June 14, 2010 1:53 PM To: 'GrADS Users Forum' Subject: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Hello Jennifer, I want to compile de grads, but I don?t know what library or file include these missing symbols, please if you kwon tell, how can I fix these problem? (Error is in the end) Thanks you very much, Huber gcc -g -O2 -o grads grads.o gxsubs.o gxmeta.o gxchpl.o gxcntr.o gxstrm.o gxwmap.o gxshad.o gaexpr.o gafunc.o gautil.o gagx.o gscrpt.o gamach.o bufrstn.o gabufr.o gabufrtbl.o gxX.o gxdxwd.o galloc.o gaddes.o gaio.o gacfg.o gauser.o gasdf.o -L../../supplibs/lib -lX11 ../../supplibs/lib/libmfhdf.a ../../supplibs/lib/libdf.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libjpeg.a ../../supplibs/lib/libz.a ../../supplibs/lib/libudunits.a ../../supplibs/lib/libnetcdf.a ../../supplibs/lib/libhdf5_hl.a ../../supplibs/lib/libhdf5.a ../../supplibs/lib/libz.a ../../supplibs/lib/libsz.a ../../supplibs/lib/libcurl.a -lm ld: Unsatisfied symbol "xdr_string" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_int" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_double" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_opaque" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdr_float" in file ../../supplibs/lib/libmfhdf.a[putget.o] ld: Unsatisfied symbol "xdrmem_create" in file ../../supplibs/lib/libnetcdf.a[liboc_la-ocinternal.o] ld: Unsatisfied symbol "xdr_enum" in file ../../supplibs/lib/libmfhdf.a[var.o] ld: Unsatisfied symbol "xdr_long" in file ../../supplibs/lib/libmfhdf.a[dim.o] ld: Unsatisfied symbol "xdr_u_int" in file ../../supplibs/lib/libnetcdf.a[liboc_la-occompile.o] ld: Unsatisfied symbol "xdr_u_long" in file ../../supplibs/lib/libmfhdf.a[string.o] 10 errors. collect2: ld returned 1 exit status make[2]: *** [grads] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: lunes, 14 de junio de 2010 9:52 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file Huber -- hdiff is a utility compiled by the hdf4 library, but not needed for GrADS. Did you already get libdf.a and libmfhdf.a? If so, then put them in $SUPPLIBS/lib and all the include files in $SUPPLIBS/include/hdf/ and run ./configure (for GrADS) again. --Jennifer On Jun 14, 2010, at 10:43 AM, Huber Pa?l Gilt L?pez wrote: Jennifer, Thank you for your help, I haven?t compiled the hdf4 library yet, because I have found the message ?Unsatisfied symbol ?sqrt? in file hdiff_array.o?, I had thought that the math library was not specify ?-lm?. Could you tell me how can I solve this problem? (The error message is in the end) Please help me, Best regards, Huber gcc -O2 -L/home/huber/grads/supplibs/src/zlib-1.2.3/lib -L/home/huber/grads/supplibs/src/jpeg-6b/lib -o hdiff hdiff.o hdiff_array.o hdiff_gr.o hdiff_list.o hdiff_main.o hdiff_mattbl.o hdiff_gattr.o hdiff_misc.o hdiff_sds.o hdiff_table.o hdiff_vs.o hdiff_dim.o ../libsrc/libmfhdf.a ../../hdf/src/libdf.a -ljpeg -lz -lnsl -ljpeg -lz -lnsl ld: Unsatisfied symbol "sqrt" in file hdiff_array.o 1 errors. collect2: ld returned 1 exit status make[2]: *** [hdiff] Error 1 make[2]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf/hdiff' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/huber/grads/supplibs/src/HDF4.2r3/mfhdf' make: *** [all-recursive] Error 1 _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 19:34 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 6:06 PM, Huber Pa?l Gilt L?pez wrote: Jennifer, Sorry, I can?t understand the patch for gasdf.c, Change this code block: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; #endif To this code block instead: gaint read_metadata (struct gafile *pfi) { struct gavar *pvar; gaint rc,i,ii,j,len,ngatts,natts,ndims,nvars,status,oflg,dummy; size_t sz,size=0; char name[300]; #if USEHDF ==1 int32 ndsets,dimsize,sds_id,dim_id,dtype,ndatts; int32 dim_sizes[H4_MAX_VAR_DIMS],rank; char sdsname[H4_MAX_NC_NAME+1]; char dimname[H4_MAX_NC_NAME+1]; #endif but according with to suggest I going to compile hdf4. Yes, you can also build wtih hdf4 -- but you must use the --disable-netcdf option when compiling that library. --Jennifer Thank you Best regards Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 16:48 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file That is a bug that occurs when you build with netcdf but without hdf4. Here is the patch for gasdf.c : # diff dev/src/gasdf.c grads-2.0.a8/src/gasdf.c 2169d2168 < char name[300]; 2174c2173 < char dimname[H4_MAX_NC_NAME+1]; --- > char name[H4_MAX_NC_NAME+1],dimname[H4_MAX_NC_NAME+1]; On Jun 11, 2010, at 5:24 PM, Huber Pa?l Gilt L?pez wrote: Hello Jennifer, Thanks you for your help, I just enabled the netcdf option but now after make command, akin the error message: gcc -DHAVE_CONFIG_H -I. -I../../supplibs/include/udunits -I../../supplibs/include/netcdf -I../../supplibs/include/hdf5 -I/usr/include/hdf -g -O2 -c gasdf.c gasdf.c: In function 'read_metadata': gasdf.c:2278: error: 'name' undeclared (first use in this function) gasdf.c:2278: error: (Each undeclared identifier is reported only once gasdf.c:2278: error: for each function it appears in.) make[2]: *** [gasdf.o] Error 1 make[2]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/huber/grads/grads-2.0.a8/src' make: *** [all-recursive] Error 1 How can I fix this undeclared ?name?? Please help me, Best regards, Huber _____ De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En nombre de Jennifer Adams Enviado el: viernes, 11 de junio de 2010 13:37 Para: GrADS Users Forum Asunto: Re: [gradsusr] Enable netcdf 4.1.1 option in grads configure file On Jun 11, 2010, at 2:11 PM, Huber Pa?l Gilt L?pez wrote: Hello, I?m trying to build grads with netcdf option enable, after I configured the grads with this command: ./configure -?prefix=/opt/grads-2.0.a8 --with-sdf --with-netcdf-include=/home/huber/grads/supplibs/include/netcdf > config.out You should not need to specify any configure options (other than --prefix) to get netcdf support. I did not write any code to support the "--with-netcdf-include" option... I had the following message that ludunits library is not found: Checking in supplibs for libraries to support netcdf-4 ... checking for udunits.h... (cached) yes checking for utInit in -ludunits... (cached) no - netcdf-4 disabled Then, I tried to build the source ldudunits library with the make command, and also I had this error: cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib -L/data/hoop/udunits-1.11.7/src/lib -ludunits -R/data/hoop/udunits-1.11.7/src/port/misc -L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm (Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler, ignored. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation. (Bundled) cc: warning 901: unknown option: `-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online documentation. ld: Can't find library for -ludunits Fatal error. Why the compilation needs the ludunits library, I was thought this library will be the output? What you're trying to build here is a utility called 'udunits' -- that is something that is built along with the library, but it is not necessary for GrADS. Look for a file called libudunits.a -- that is what GrADS needs -- and put it in your $SUPPLIBS/lib location. --Jennifer Please help me Best regards, Huber Paul Gilt Lopez IGP-Peru _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org _______________________________________________ gradsusr mailing list gradsusr at gradsusr.org http://gradsusr.org/mailman/listinfo/gradsusr -- Jennifer M. Adams IGES/COLA 4041 Powder Mill Road, Suite 302 Calverton, MD 20705 jma at cola.iges.org -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100615/5be214ef/attachment-0001.html From me at j0nes.de Wed Jun 16 09:20:35 2010 From: me at j0nes.de (Jonas Kaufmann) Date: Wed, 16 Jun 2010 15:20:35 +0200 Subject: [gradsusr] Writing own texts into file In-Reply-To: <4C179A66.3070906@noaa.gov> References: <4C179A66.3070906@noaa.gov> Message-ID: Hi Charles, too simple and too obvious to notice this for myself - works great, thanks! Best regards, Jonas Kaufmann On Tue, Jun 15, 2010 at 17:21, Charles Seman wrote: > Jonas, > > Try something like: > > dummy=write('myfile.txt', 'temperature: 'result, 1) > > > Hope this helps, > Chuck > > Jonas Kaufmann wrote: >> Hello, >> >> I am currently writing some data into text files via >> >> 'd tmp2m' >> dummy=write('myfile.txt', result, 1) >> >> Now I would like to add some custom information into this file, e.g. >> writing some comments in it. I tried something like >> >> 'say temperature' >> dummy=write('myfile.txt', result, 1) >> 'd tmp2m' >> dummy=write('myfile.txt', result, 1) >> >> ...but this failed. Is this possible, and if so, how can I do this? >> >> Best regards, >> Jonas Kaufmann >> _______________________________________________ >> gradsusr mailing list >> gradsusr at gradsusr.org >> http://gradsusr.org/mailman/listinfo/gradsusr >> > > -- > > Please note that Charles.Seman at noaa.gov should be considered my NOAA > email address, not cjs at gfdl.noaa.gov. > > ******************************************************************** > ?Charles Seman ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Charles.Seman at noaa.gov > ?U.S. Department of Commerce / NOAA / OAR > ?Geophysical Fluid Dynamics Laboratory ? ? ? ? voice: (609) 452-6547 > ?201 Forrestal Road ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?fax: (609) 987-5063 > ?Princeton, NJ ?08540-6649 ? ? ? ? ? ?http://www.gfdl.noaa.gov/~cjs/ > ******************************************************************** > > "The contents of this message are mine personally and do not reflect any > official or unofficial position of the United States Federal Government, > the United States Department of Commerce, or NOAA." > > _______________________________________________ > gradsusr mailing list > gradsusr at gradsusr.org > http://gradsusr.org/mailman/listinfo/gradsusr > From a.arvensis at gmail.com Wed Jun 16 18:09:53 2010 From: a.arvensis at gmail.com (Alauda arvensis) Date: Wed, 16 Jun 2010 18:09:53 -0400 Subject: [gradsusr] using fwrite Message-ID: Dear GrADS users, I wish to open a GrADS file (test.ctl) and save one variable to a different file (out4.ctl). For this purpose I type the following: open test.ctl set fwrite out4.dat set gxout fwrite d var130 I now have a binary file called "out4.dat" which contains my variable "var130". To open it in GrADS I need to create the respective .ctl-file. I copy it from test.ctl and make a few changes (see both test.ctl and out4.ctl below). I can open "out4" in GrADS and display "var130". Unfortunately the data does not display correctly: all longitude values are displayed correctly but all latitude values are upside down, comparible to the effect of a mirrow. My questions: (1) Why is my data not displaying correctly and what do I need to do to fix this? (2) Is it possible to save more than 1 variable in a binary file? I tried this by applying the steps above and typing after "d var130" also "d var157". I then apply the respective changes in the .ctl-file (i.e. VARS 2 and var157 14 157,100 var157). However, I can only display "var130" and not "var157". (3) Is this methodology (fwrite) the best way to save changes after the manipulation of a GrADS file? Thank you very much in advance. With kind regards, Chris ################################### test.ctl * Generated by CDO version 1.4.0 * DSET ^test.grb DTYPE GRIB INDEX ^test.gmp XDEF 55 LINEAR 270.000000 1.125000 YDEF 47 LEVELS -40.934 -39.813 -38.691 -37.570 -36.448 -35.327 -34.205 -33.084 -31.962 -30.841 -29.719 -28.598 -27.476 -26.355 -25.234 -24.112 -22.991 -21.869 -20.748 -19.626 -18.505 -17.383 -16.262 -15.140 -14.019 -12.897 -11.776 -10.654 -9.533 -8.411 -7.290 -6.168 -5.047 -3.925 -2.804 -1.682 -0.561 0.561 1.682 2.804 3.925 5.047 6.168 7.290 8.411 9.533 10.654 ZDEF 14 LEVELS 1000 925 850 700 500 400 300 250 200 150 100 70 50 30 TDEF 4 LINEAR 00:00Z01jan1960 1dy TITLE test.grb T31 grid OPTIONS yrev UNDEF -9e+33 VARS 5 var130 14 130,100 var130 var157 14 157,100 var157 var129 14 129,100 var129 var131 14 131,100 var131 var132 14 132,100 var132 ENDVARS ################################### out4.ctl * Generated by CDO version 1.4.0 * DSET ^out4.dat XDEF 55 LINEAR 270.000000 1.125000 YDEF 47 LEVELS -40.934 -39.813 -38.691 -37.570 -36.448 -35.327 -34.205 -33.084 -31.962 -30.841 -29.719 -28.598 -27.476 -26.355 -25.234 -24.112 -22.991 -21.869 -20.748 -19.626 -18.505 -17.383 -16.262 -15.140 -14.019 -12.897 -11.776 -10.654 -9.533 -8.411 -7.290 -6.168 -5.047 -3.925 -2.804 -1.682 -0.561 0.561 1.682 2.804 3.925 5.047 6.168 7.290 8.411 9.533 10.654 ZDEF 14 LEVELS 1000 925 850 700 500 400 300 250 200 150 100 70 50 30 TDEF 4 LINEAR 00:00Z01jan1960 1dy TITLE out4.dat OPTIONS yrev UNDEF -9e+33 VARS 1 var130 14 130,100 var130 ENDVARS -------------- next part -------------- An HTML attachment was scrubbed... URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100616/653bb66f/attachment-0001.html From anthony.luosan at gmail.com Thu Jun 17 00:17:57 2010 From: anthony.luosan at gmail.com (san luo) Date: Thu, 17 Jun 2010 12:17:57 +0800 Subject: [gradsusr] EOF Message-ID: hi,everyone!I wonder if someone could do me a favor.Recently I use the data attached above to caculate eof,but the value is very bad.I don't know if it is the program' problem.what I want is if someone could give me a hand to use the data above to caculate eof and send the value to me. please help me ! -------------- next part -------------- 0.02 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.00 0.00 0.00 0.00 0.00 0.30 0.01 0.01 0.00 0.01 0.91 0.01 0.00 22.00 2.00 0.20 19.01 12.00 0.00 0.01 0.01 0.00 0.00 8.90 0.12 12.20 0.01 32.00 0.00 0.00 0.40 0.00 0.00 0.00 73.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 11.90 0.00 29.02 40.80 14.00 7.20 0.00 19.30 0.01 0.21 4.21 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 9.31 0.01 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.01 0.72 0.11 0.00 0.02 0.40 0.02 0.01 23.00 0.01 2.01 22.01 32.00 0.00 0.01 0.00 0.00 0.00 6.00 5.00 0.30 0.00 0.00 0.00 0.02 10.01 0.00 0.00 0.00 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.01 0.00 14.20 38.01 3.00 41.50 0.00 0.61 0.01 0.02 7.00 0.00 0.00 0.00 0.00 37.00 3.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.21 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.01 1.01 2.00 0.00 0.00 0.00 0.00 0.40 13.40 0.01 6.00 25.40 0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.00 0.00 0.00 0.00 0.00 0.00 0.51 0.00 0.00 11.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.31 8.00 56.00 14.10 0.60 0.00 0.01 0.31 0.00 0.41 0.00 0.00 1.50 0.00 0.00 0.00 0.00 0.00 3.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.80 5.00 0.30 0.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.10 0.71 3.70 0.00 0.01 0.00 0.00 0.00 9.00 3.00 21.00 33.00 3.20 0.00 0.00 0.00 0.00 0.00 0.00 0.11 28.00 4.00 11.00 0.00 0.00 0.00 0.00 0.00 0.00 23.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 17.01 5.00 0.00 5.11 39.60 0.01 0.00 0.00 0.11 0.02 2.01 0.00 0.00 9.40 0.00 0.01 0.00 0.00 0.00 7.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 128.00 5.90 0.01 0.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.80 0.91 0.00 0.00 0.00 0.00 0.00 0.00 10.00 0.00 0.01 4.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.01 0.00 0.00 0.00 0.00 0.00 0.00 13.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 6.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 0.00 0.01 0.01 20.40 0.00 0.00 0.00 0.00 2.02 4.00 24.00 0.10 0.00 0.11 0.30 1.00 0.00 10.00 0.01 6.40 3.10 0.00 0.00 0.01 0.50 0.00 0.00 2.90 0.00 1.50 0.00 0.00 0.00 0.00 0.52 0.80 0.00 0.00 21.00 0.00 0.00 0.00 34.00 3.01 0.00 0.00 0.00 0.00 0.00 0.00 5.41 12.10 0.30 0.70 32.00 0.71 0.00 0.00 11.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.50 0.00 14.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 6.00 20.00 0.00 0.00 0.00 0.00 4.01 6.20 1.01 0.11 0.01 0.01 0.00 0.00 1.00 2.00 8.00 5.50 28.01 2.00 0.00 6.80 2.00 0.01 0.02 0.11 0.01 4.30 0.00 0.00 0.00 0.01 0.01 0.01 0.00 0.00 29.00 0.00 0.00 0.00 0.01 0.01 0.02 0.00 0.00 0.00 0.02 0.30 28.10 0.20 0.00 6.01 0.02 9.01 0.00 0.02 40.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.01 51.60 0.00 5.02 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 5.41 1.51 2.01 0.02 0.00 0.00 0.00 0.00 0.20 0.00 22.40 39.00 0.30 0.00 0.00 0.00 0.00 1.00 0.00 0.01 0.61 0.10 0.00 0.00 0.00 7.11 4.10 0.00 0.00 0.11 2.00 0.00 0.00 0.02 0.02 0.02 0.00 0.00 0.00 2.00 22.00 9.71 0.00 0.00 3.01 0.00 0.00 0.01 42.00 6.01 0.00 0.01 5.41 0.01 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 3.01 4.81 0.03 11.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.81 2.31 3.00 0.04 0.00 0.01 0.00 0.00 1.01 0.00 14.00 11.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 19.01 2.01 0.00 0.00 117.01 0.21 0.12 0.00 0.00 0.00 0.00 0.00 0.00 3.00 35.00 16.00 14.91 0.02 0.00 4.80 0.00 0.00 0.00 2.70 12.01 0.00 0.01 3.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.02 0.01 17.30 3.00 2.11 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 6.00 0.01 0.00 0.00 0.00 0.00 0.41 0.00 0.00 0.00 0.02 0.50 0.01 0.00 10.00 1.00 2.00 12.00 0.01 1.00 2.01 2.00 0.51 11.00 5.91 6.01 15.10 0.80 0.00 0.60 0.02 2.11 0.00 0.00 0.00 13.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.02 0.10 0.90 41.00 1.02 0.00 0.02 54.50 0.10 0.00 8.01 0.60 0.00 0.00 0.00 12.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 8.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 4.00 8.00 0.00 0.00 0.00 3.01 0.20 0.00 0.01 24.00 0.00 9.00 0.90 5.20 13.40 9.10 3.80 0.00 0.60 0.01 0.00 0.00 0.00 2.00 35.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 20.20 6.40 0.00 0.00 41.00 0.00 0.00 2.00 2.00 0.00 0.00 0.00 1.60 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 34.52 0.00 0.00 0.00 0.00 0.10 4.80 0.40 0.10 0.00 0.01 0.01 0.30 0.00 0.01 2.01 2.40 0.32 0.01 0.00 6.20 0.01 0.01 0.02 13.10 0.70 0.81 0.00 0.00 0.00 0.00 0.02 0.01 0.00 0.00 29.00 0.00 0.00 0.00 0.50 0.11 0.00 0.00 0.00 0.00 0.00 0.00 10.02 11.20 2.00 0.31 8.20 42.00 0.00 14.00 0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.71 2.91 0.01 0.00 0.00 0.00 0.00 2.01 0.01 0.01 0.00 0.01 0.01 6.00 0.10 0.20 0.30 2.02 20.00 0.01 0.00 0.20 0.01 0.00 0.02 12.00 0.40 0.00 0.00 0.00 0.00 0.00 3.00 0.11 0.00 0.00 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 10.01 3.11 19.00 0.20 4.00 6.40 0.00 5.20 11.80 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 26.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.01 10.01 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 2.00 0.01 5.00 0.10 11.00 2.00 2.02 14.00 27.00 0.01 31.20 0.00 0.40 0.31 0.01 0.00 12.10 6.00 0.11 8.51 0.01 9.00 3.00 0.00 0.00 38.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 4.00 40.70 0.62 0.00 0.00 16.00 0.01 0.01 42.00 0.70 0.00 0.00 0.00 1.00 0.40 0.20 0.00 0.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 18.21 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.61 0.30 0.01 0.00 0.00 0.01 0.02 0.01 30.01 0.01 5.01 13.01 27.00 0.00 12.00 8.00 0.00 2.00 0.11 7.00 72.22 0.21 16.00 0.00 0.00 0.00 0.01 0.00 0.00 51.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.80 5.10 0.00 0.00 68.00 0.21 3.00 0.00 1.01 0.01 0.00 32.01 3.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.80 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.30 0.01 45.00 0.60 10.00 39.01 0.00 22.10 10.00 0.00 0.01 3.50 1.50 13.70 0.81 22.02 4.01 2.00 0.00 0.00 0.00 0.00 35.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.10 0.00 0.00 0.00 30.00 1.00 0.00 0.00 16.00 5.00 0.00 24.02 3.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 1.70 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 12.00 3.20 0.80 49.00 51.50 0.00 0.00 23.00 0.00 0.00 0.02 5.00 0.01 2.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 83.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.00 3.00 0.00 9.00 0.00 0.00 0.00 0.00 0.00 0.00 11.90 8.00 0.00 0.00 0.00 0.60 0.00 0.00 0.00 10.30 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.10 0.71 1.90 0.00 0.00 0.00 0.00 5.20 27.00 0.00 2.00 60.11 1.30 0.00 0.10 0.00 0.00 0.00 0.01 0.02 0.00 0.00 0.01 0.00 40.00 0.01 0.00 0.00 0.00 25.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 55.00 77.00 11.00 73.00 0.00 0.00 10.00 0.00 0.40 0.00 0.00 0.51 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 23.60 1.70 0.90 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.12 0.80 0.00 0.00 0.00 0.00 0.00 1.40 3.00 14.00 15.02 17.00 0.00 0.01 2.00 0.00 0.00 0.01 13.00 27.01 0.20 12.01 0.00 0.00 0.00 0.00 0.00 0.00 80.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 2.00 2.02 0.00 35.30 0.00 7.10 0.00 0.00 0.00 0.00 2.01 0.00 0.00 0.71 0.00 5.00 13.00 0.00 0.00 7.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 63.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.02 2.30 0.00 0.00 0.00 0.00 0.00 15.00 2.00 0.00 62.00 20.40 0.00 0.00 3.00 0.00 0.00 0.01 8.01 5.00 5.20 2.30 0.00 0.00 0.00 0.00 0.00 0.00 42.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 6.90 0.80 0.00 6.41 0.00 0.00 0.00 0.00 0.00 0.00 96.10 2.00 0.00 3.00 0.00 0.20 0.00 3.00 0.00 2.61 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 65.90 6.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 1.10 0.71 2.01 0.00 0.02 0.00 0.00 23.01 17.11 0.00 60.10 22.01 0.61 0.00 4.00 0.00 0.00 0.00 0.01 1.00 0.10 0.00 0.00 0.00 23.00 6.00 0.02 0.00 0.00 12.20 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 4.30 0.01 36.00 63.01 0.00 16.20 0.00 0.00 10.02 0.31 3.60 0.01 0.00 1.02 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.20 4.10 0.11 0.10 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 4.01 3.32 2.30 0.01 47.00 0.00 0.00 9.00 0.01 0.00 8.00 13.50 0.21 0.00 0.00 0.00 0.00 0.00 0.01 15.00 5.60 0.00 0.00 0.00 0.00 0.01 0.02 0.00 0.00 7.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.01 4.20 0.01 21.01 0.00 33.00 0.00 0.00 4.60 1.50 26.30 0.00 0.00 1.40 0.00 0.00 0.00 0.00 0.00 0.61 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.70 16.52 2.11 0.11 2.02 0.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.61 7.21 9.00 0.00 3.02 0.01 0.00 24.00 30.01 0.10 16.00 4.21 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.61 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 52.00 0.00 4.30 1.00 15.00 0.00 0.00 0.40 0.02 7.01 0.00 0.00 16.80 0.00 0.00 0.00 0.70 0.00 2.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.03 1.00 0.02 2.11 0.71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.01 6.40 14.00 0.00 21.00 1.00 0.00 0.90 27.00 0.01 54.00 23.20 0.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 16.00 15.40 0.00 0.00 1.01 0.00 0.00 0.00 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 7.00 21.50 0.00 1.81 4.01 1.01 0.00 0.00 0.01 0.00 7.00 0.00 0.00 1.41 0.00 0.00 0.00 0.00 0.00 3.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.50 2.40 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 4.00 5.60 0.00 0.00 0.00 0.00 8.11 2.42 15.02 0.01 0.01 1.30 0.00 6.80 0.01 0.01 0.01 2.00 0.00 0.00 0.00 0.01 0.00 0.50 0.10 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.01 14.00 9.00 2.40 0.00 0.00 0.00 2.00 0.30 7.20 0.00 0.00 1.01 2.00 0.00 0.00 0.11 22.00 2.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.10 0.00 0.01 33.10 0.00 11.00 0.00 0.00 15.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.11 0.01 25.51 0.00 0.00 0.00 0.00 4.10 3.01 1.00 0.10 0.01 0.12 0.00 0.40 0.01 0.10 4.00 3.00 6.50 0.00 0.00 9.00 18.00 0.00 0.01 2.01 0.01 0.51 0.00 0.00 0.00 0.00 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 10.01 0.11 0.01 0.00 0.00 0.90 0.20 2.00 7.01 1.00 3.00 13.00 0.01 0.00 0.00 0.00 22.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.01 0.60 43.00 0.00 4.02 0.00 0.00 0.00 0.00 0.00 0.01 0.00 1.00 0.01 0.00 0.01 0.00 0.00 0.01 0.02 0.00 0.00 0.11 0.00 18.01 0.10 15.61 0.31 2.21 5.71 0.00 0.01 2.70 0.00 0.00 0.00 7.10 0.00 0.00 0.00 0.00 0.20 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 4.01 0.00 0.00 0.00 12.01 3.00 0.01 0.00 0.01 0.01 0.11 14.10 49.00 42.00 0.01 0.20 12.00 0.00 0.00 2.01 23.40 5.00 1.20 3.10 1.40 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 40.60 0.10 50.00 0.40 0.00 12.00 0.00 0.00 2.00 0.00 0.01 0.00 0.00 0.80 0.01 0.00 0.00 39.00 0.00 0.00 0.00 0.00 12.20 3.10 1.60 5.20 0.00 0.20 0.00 1.00 16.00 10.00 0.00 10.00 16.00 0.00 0.00 5.01 0.00 6.00 0.21 0.00 0.80 0.80 0.00 0.00 0.60 8.01 0.61 6.00 0.00 0.00 17.00 0.00 0.00 0.30 6.00 0.51 3.20 0.00 0.01 0.00 0.01 5.01 53.00 1.00 0.10 0.02 1.00 0.00 0.00 0.50 15.01 2.00 3.00 8.01 0.00 0.00 0.00 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 68.00 9.00 34.40 2.00 0.00 0.00 0.00 0.00 0.02 0.00 0.11 0.10 0.00 0.01 0.01 0.40 2.10 0.02 0.00 0.00 0.00 0.00 11.01 0.71 5.81 1.00 2.03 11.02 0.01 0.11 4.70 0.02 0.50 5.20 18.20 0.00 4.00 0.01 0.01 2.00 0.71 0.00 0.01 0.01 0.00 0.00 0.00 11.11 1.00 0.01 0.00 0.00 40.10 0.01 0.00 0.00 23.01 11.00 6.10 0.30 0.10 2.00 0.21 5.20 9.01 2.00 0.00 0.00 18.10 0.00 1.00 1.10 4.01 0.00 12.00 6.01 0.00 0.00 2.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.03 2.00 0.00 0.00 3.00 61.01 1.70 60.00 8.00 0.00 11.00 0.00 0.00 0.01 0.00 0.00 0.70 0.00 0.00 0.61 0.00 5.00 0.00 0.00 0.00 0.00 0.00 12.51 0.10 12.50 0.60 3.00 4.00 0.00 0.60 7.00 0.00 1.00 2.70 12.10 0.00 0.00 0.00 0.00 0.00 0.90 0.00 0.30 0.10 0.00 0.00 0.00 3.41 0.00 0.00 0.00 0.00 7.00 0.00 0.00 0.00 32.90 3.10 0.01 1.00 0.50 0.80 9.00 8.80 0.20 0.00 0.00 0.00 0.51 0.00 0.00 0.00 69.00 0.00 0.00 3.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.80 70.00 6.60 6.30 17.10 0.40 3.00 0.00 0.60 0.41 0.00 0.00 0.00 0.00 0.01 0.10 0.01 0.00 36.31 0.00 0.00 0.00 0.00 8.61 6.01 2.92 5.00 0.01 2.32 0.00 1.00 0.10 0.50 0.10 3.01 37.20 0.00 0.00 0.01 0.00 0.00 0.51 0.90 0.01 0.02 0.00 0.00 0.00 9.00 0.21 0.01 0.00 0.00 9.00 0.00 0.00 0.00 10.70 8.21 6.90 0.00 0.00 0.60 0.01 13.01 12.70 0.00 0.00 0.00 13.80 0.10 6.01 0.30 16.01 0.00 0.91 3.20 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 35.00 0.00 0.00 0.00 0.71 52.00 10.21 15.00 8.00 0.01 0.00 0.00 0.00 0.01 0.00 0.01 0.01 0.00 0.00 0.01 0.01 0.01 0.01 0.00 0.00 0.00 0.00 14.22 6.60 5.80 0.31 0.40 0.00 0.00 0.00 11.00 8.00 0.00 2.40 21.10 0.00 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.02 4.00 0.00 0.00 0.00 0.01 0.40 0.31 0.00 11.01 3.01 0.30 0.61 2.00 0.50 30.20 23.70 19.60 0.00 0.00 0.00 0.00 0.01 0.01 1.00 0.00 0.01 0.01 10.10 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.01 0.41 3.01 3.90 48.10 1.80 3.60 0.00 0.00 0.81 0.00 0.00 0.01 0.00 0.50 1.00 0.01 0.00 0.62 0.00 0.00 0.00 0.00 5.71 4.21 3.72 1.01 0.12 0.02 0.10 0.01 0.01 0.01 0.00 5.01 29.01 0.00 0.00 0.00 0.00 0.00 0.30 0.00 0.30 0.10 0.00 0.00 0.00 0.21 0.00 2.00 0.00 0.00 0.91 0.02 0.00 0.00 0.01 1.90 22.00 0.00 0.01 3.00 1.00 38.90 27.00 0.00 0.00 3.00 0.01 5.00 0.01 0.30 49.00 0.00 0.10 14.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 10.00 2.10 1.02 10.00 28.80 0.60 0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 7.00 0.00 0.00 0.01 0.00 0.00 0.00 3.01 0.00 0.00 0.00 0.00 3.12 7.51 8.50 1.02 0.11 0.00 0.00 0.00 2.00 5.00 0.00 0.11 13.02 0.00 0.00 0.00 0.00 0.00 0.30 0.00 0.00 2.00 0.00 0.00 0.00 2.01 0.30 7.20 0.00 0.00 4.00 1.20 3.21 0.10 8.01 2.00 65.00 1.00 0.01 0.01 4.00 34.00 33.00 0.00 0.00 0.01 0.00 0.60 0.00 0.10 10.00 0.00 0.00 5.00 0.00 0.00 0.10 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 4.10 21.01 3.00 15.60 5.80 8.00 0.00 0.00 0.00 0.00 2.00 0.50 0.00 0.00 3.20 0.10 0.10 0.01 0.01 0.00 0.00 0.01 15.00 4.90 5.50 0.31 0.81 3.00 0.00 0.00 10.00 1.01 0.00 1.31 19.00 0.00 2.40 1.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.81 1.30 0.01 0.00 0.00 0.00 3.03 8.40 0.00 18.71 8.01 2.70 0.31 12.00 3.01 19.50 11.50 2.30 0.00 0.00 0.00 0.00 0.00 0.01 0.31 0.00 0.80 0.60 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.01 0.00 4.30 0.03 14.51 12.00 11.20 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.01 2.00 0.01 0.00 0.00 0.00 0.00 11.03 3.30 6.71 4.01 0.31 0.00 0.00 0.00 0.01 3.00 0.00 6.20 10.20 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 2.30 0.00 0.12 0.00 0.00 54.01 1.00 3.21 0.00 2.00 23.01 2.00 0.60 4.12 6.10 0.80 21.00 30.10 0.00 0.00 0.00 0.80 0.00 0.00 0.00 5.01 0.90 0.00 16.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 7.00 3.10 5.00 36.20 17.10 4.20 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 4.00 3.01 0.00 0.00 0.01 11.60 2.71 5.11 5.00 1.30 0.00 0.00 0.00 0.30 0.01 0.00 1.21 5.00 0.00 0.02 0.00 0.40 0.50 0.10 0.00 0.00 0.00 0.00 0.00 3.00 5.01 0.01 0.00 0.00 0.00 0.31 9.20 1.31 0.00 0.00 22.00 1.20 0.00 0.71 0.00 24.01 37.00 30.00 0.00 0.00 0.00 0.00 0.00 0.00 0.03 1.00 0.00 0.01 10.00 0.00 0.00 0.01 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 2.00 1.00 0.01 17.10 16.01 0.00 0.00 23.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.00 1.10 0.00 0.00 0.00 3.02 13.50 0.80 4.40 4.02 0.00 0.00 0.30 12.00 0.11 0.00 31.00 19.03 0.00 1.01 0.00 0.50 0.01 0.01 0.00 0.00 0.02 0.00 0.00 0.00 1.30 4.01 0.02 0.00 0.00 9.01 0.92 3.41 0.00 0.00 0.00 0.61 0.02 0.00 0.30 1.10 20.00 31.00 0.00 0.00 2.01 0.00 0.00 0.00 0.51 3.01 0.00 0.01 15.01 0.00 0.00 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 3.60 0.00 0.01 0.01 1.60 20.30 39.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 2.10 0.00 0.00 20.00 21.00 3.30 8.30 3.41 4.00 0.00 0.00 0.00 0.20 0.01 0.00 6.31 0.00 0.00 3.00 2.20 35.00 8.20 0.40 0.00 0.00 0.00 0.00 0.00 0.00 34.00 0.00 0.00 0.00 0.00 0.21 122.00 13.80 0.00 0.00 0.60 0.00 0.00 0.90 0.00 3.10 41.00 14.01 0.00 0.00 0.01 0.00 0.00 0.00 1.10 0.00 0.00 1.71 15.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 46.00 0.20 0.01 22.30 23.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 4.00 2.00 0.00 0.00 4.00 19.00 6.91 4.40 6.40 6.70 0.00 0.00 0.00 0.01 0.02 0.00 1.71 5.20 0.00 1.10 0.30 3.01 0.51 0.02 0.00 0.00 0.01 0.00 0.00 0.01 5.20 0.00 0.00 0.00 0.00 50.00 19.00 1.80 0.00 0.00 1.10 0.40 0.00 3.01 0.00 0.02 103.50 24.40 0.00 0.01 0.31 0.00 0.00 0.00 0.31 0.60 0.00 0.03 5.01 0.00 0.00 0.10 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.21 0.00 0.02 43.01 25.01 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 10.00 1.00 0.00 0.00 0.01 7.30 5.50 2.60 2.90 3.81 0.00 0.00 0.00 6.00 2.00 0.00 1.60 9.02 0.00 0.02 0.50 1.00 2.30 0.02 0.00 0.00 0.00 0.00 0.00 0.00 4.02 0.01 0.00 0.00 0.00 4.02 23.50 5.81 0.00 0.00 0.00 0.11 0.00 0.00 1.21 20.00 105.60 50.11 0.01 0.01 9.01 0.00 0.00 0.00 0.20 0.10 0.00 0.01 4.12 0.01 0.00 0.70 0.00 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.03 0.00 0.02 16.50 36.30 0.00 0.00 3.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.51 0.00 0.00 2.01 0.00 0.00 9.00 0.02 0.50 0.00 0.00 0.00 0.41 1.10 0.00 0.00 0.00 0.00 17.20 0.40 0.00 0.01 0.00 0.03 0.00 0.00 0.00 5.01 9.90 0.00 0.00 0.00 0.00 0.00 18.12 0.21 0.41 0.01 0.71 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 2.01 0.00 18.10 0.00 11.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 13.51 0.40 0.00 10.00 2.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.40 19.30 0.20 0.00 0.00 0.00 0.00 0.00 0.01 2.61 0.00 0.00 0.02 0.01 0.00 10.41 4.20 6.70 0.00 0.00 0.00 0.62 0.91 0.00 0.00 0.00 0.00 3.01 1.00 0.00 0.00 0.00 0.03 12.60 0.00 0.00 0.90 26.40 0.10 0.00 0.00 0.00 0.00 21.00 0.50 2.10 0.00 1.01 0.71 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.81 0.00 0.00 0.01 0.00 0.01 0.00 0.10 0.11 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.40 15.00 4.00 0.00 7.01 0.21 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.31 0.00 20.00 5.00 6.41 0.00 0.01 0.00 0.01 0.02 0.02 0.00 0.00 0.41 2.20 0.70 29.31 0.00 0.00 0.00 24.00 0.00 0.00 0.00 0.91 11.50 0.00 0.00 0.00 0.00 23.40 30.70 0.00 0.20 0.01 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.01 0.31 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.51 1.72 0.70 7.21 10.40 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.60 0.30 0.00 11.00 0.21 0.00 1.00 0.00 0.00 0.90 0.00 0.00 0.00 0.01 0.31 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 1.00 0.00 0.00 15.00 3.01 0.00 0.00 0.01 0.00 0.00 2.10 0.00 0.00 0.00 1.01 4.00 3.10 0.00 0.00 0.00 12.70 0.40 0.00 0.00 1.50 10.00 1.00 0.00 0.00 0.00 0.00 9.10 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 1.10 0.40 27.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 15.40 2.00 0.00 23.00 2.41 0.00 0.50 0.00 0.00 0.00 0.00 0.01 0.00 1.01 14.10 0.00 0.00 0.00 0.00 0.00 0.00 5.00 0.01 0.00 0.00 0.00 0.00 0.00 13.00 0.02 4.01 0.00 0.01 0.00 0.01 5.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 8.01 6.20 0.00 0.00 0.91 19.01 0.30 0.00 0.00 0.00 0.00 0.30 13.01 0.00 2.00 0.30 0.00 1.70 0.00 0.01 9.01 0.20 0.00 0.00 0.00 0.80 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.21 7.00 0.00 0.60 9.51 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.30 0.00 3.01 2.00 3.40 0.00 0.00 0.01 0.01 0.00 0.90 0.00 0.02 3.00 3.40 38.10 0.40 0.00 0.00 0.00 1.00 0.00 0.00 0.00 10.01 11.00 0.01 0.10 0.00 0.00 6.02 15.01 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 2.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.42 23.00 19.50 7.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.30 0.00 0.00 19.01 0.01 2.00 0.00 0.00 0.00 1.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 3.30 0.01 0.01 7.00 18.00 0.00 0.00 0.00 0.00 0.02 5.51 0.02 0.01 1.00 5.00 11.01 4.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 4.03 0.00 0.00 0.00 0.00 22.00 0.80 0.00 0.01 0.00 0.01 0.01 0.00 0.00 0.10 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.11 0.01 1.01 26.00 15.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.12 3.00 0.00 18.00 1.21 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 2.51 11.10 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.30 5.21 0.61 0.10 0.00 0.20 0.00 0.20 6.01 0.00 0.00 0.00 0.00 0.80 0.00 0.00 0.00 0.70 0.61 10.20 0.00 0.00 0.70 21.30 2.00 0.00 0.00 0.00 0.00 9.10 0.01 0.10 0.01 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.60 4.60 1.50 2.50 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 2.10 12.00 0.00 24.00 7.60 0.01 0.00 0.00 0.00 0.10 0.00 0.01 0.00 1.60 4.61 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.01 1.01 15.01 0.00 0.00 0.00 0.00 0.70 1.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 25.00 0.00 8.00 5.30 39.00 1.00 0.00 0.00 0.00 0.00 0.70 0.01 0.01 2.70 0.00 0.00 0.51 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.01 11.00 0.00 0.00 0.00 0.00 0.00 0.01 6.00 0.01 46.10 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 5.00 0.00 0.20 5.01 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 1.70 0.70 5.01 0.90 0.00 0.00 0.00 0.00 0.30 7.00 0.00 9.00 6.00 0.00 0.00 3.01 1.90 0.00 0.10 0.01 0.01 0.00 0.00 0.11 0.13 0.00 0.00 0.00 0.00 0.00 6.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.10 0.01 0.00 3.50 78.00 10.00 0.30 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.03 0.70 0.00 4.00 5.00 0.00 4.00 0.00 0.00 19.00 0.01 0.00 0.00 0.10 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 5.00 2.20 1.80 2.11 0.00 0.00 0.00 0.00 0.40 1.40 0.00 0.00 7.10 1.01 38.00 32.01 1.30 2.60 0.00 0.10 0.10 0.00 0.00 49.40 11.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 6.00 0.00 0.00 0.00 0.40 2.70 0.00 4.00 0.00 9.01 44.00 8.51 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.50 0.00 0.60 0.00 0.00 1.40 0.00 0.00 0.01 0.01 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.01 0.00 0.62 9.00 0.00 0.00 0.00 0.00 5.00 14.20 0.00 0.00 6.00 48.01 32.00 19.60 0.00 0.02 0.00 0.00 3.00 0.00 0.00 0.02 62.00 1.41 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.90 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 18.00 30.00 18.01 0.00 2.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.81 0.00 0.80 0.00 0.00 0.21 0.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 11.01 0.40 3.00 0.51 11.00 0.00 0.00 0.01 0.01 0.02 1.71 0.00 0.01 2.00 0.31 1.00 0.00 0.00 0.00 0.00 0.30 2.00 0.01 0.00 0.12 6.00 11.01 0.01 0.00 0.00 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.30 0.10 0.01 0.01 0.00 0.00 0.01 9.00 10.01 0.51 3.90 22.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.01 0.42 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.03 3.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 1.00 0.01 0.00 0.00 0.01 0.00 2.00 0.00 0.00 0.01 0.00 0.01 6.90 0.02 1.00 4.21 0.31 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.10 0.00 0.00 0.00 0.02 0.00 0.03 0.60 1.00 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.91 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.01 0.30 0.00 0.00 0.00 0.00 2.00 0.40 1.70 0.00 0.00 0.01 0.02 0.01 0.02 33.01 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.30 0.00 0.02 3.30 10.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 4.30 0.02 0.00 0.00 0.00 0.01 0.82 0.01 0.01 0.01 0.00 2.01 7.00 0.00 0.00 7.50 0.00 0.02 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.41 1.42 0.00 0.00 0.00 0.02 0.00 0.00 1.10 9.30 0.00 0.00 0.00 0.00 0.00 2.00 24.00 0.70 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.60 0.00 2.01 0.00 0.00 0.00 0.01 6.01 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 6.01 1.01 2.01 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.01 0.10 0.00 0.00 0.00 0.00 0.00 9.00 0.00 2.00 0.00 0.01 0.00 0.00 2.61 0.41 0.70 0.01 0.00 0.00 0.10 0.02 2.01 29.40 0.20 0.00 0.00 0.00 0.00 0.00 0.00 6.00 0.51 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.01 0.01 0.00 0.00 0.00 3.01 0.00 1.00 0.01 0.00 0.00 0.00 0.00 1.61 0.00 0.10 0.00 0.00 0.00 0.70 0.30 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.50 0.02 0.01 11.01 2.40 0.01 0.00 0.00 0.00 0.21 0.00 0.00 0.01 0.00 0.02 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.01 3.01 19.80 1.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 25.00 0.00 0.00 0.00 0.00 1.01 0.00 0.00 0.00 0.00 1.02 0.00 0.00 4.00 0.00 0.21 0.51 0.00 0.00 0.00 0.00 20.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.40 0.00 1.01 3.10 0.90 0.00 0.00 0.00 0.90 0.21 0.11 0.00 0.01 0.10 0.80 0.00 0.00 0.01 0.00 0.00 2.00 0.00 2.90 0.01 0.01 0.00 0.00 0.00 0.70 3.00 0.10 0.00 2.82 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.00 3.00 0.00 0.01 10.01 2.91 26.00 1.90 6.20 0.00 0.00 23.00 4.00 0.01 0.01 0.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.03 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.10 18.50 1.00 26.00 14.00 0.40 0.00 0.00 0.00 0.00 1.00 0.00 0.01 0.80 0.01 0.00 0.00 0.00 0.00 2.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.40 0.01 0.00 0.00 3.00 4.00 0.00 0.00 0.01 30.70 0.90 0.00 0.00 0.10 0.00 6.60 1.00 5.00 0.00 0.00 0.00 0.10 0.00 0.00 0.40 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.71 0.40 0.01 11.40 7.00 0.00 0.00 0.00 3.00 0.30 0.00 0.00 0.02 0.10 0.10 0.00 0.00 0.00 0.00 0.00 0.01 0.00 1.01 34.20 0.03 0.00 0.00 1.00 0.00 0.00 0.02 0.02 8.11 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 3.10 0.00 0.01 34.80 12.50 1.01 29.01 0.30 0.00 0.00 0.42 0.00 0.00 0.01 20.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.60 14.00 2.70 14.10 6.01 0.00 0.00 0.00 0.02 0.01 0.01 0.00 0.01 0.01 0.00 0.00 0.00 0.01 0.03 0.00 0.00 0.00 9.01 40.60 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13.00 0.00 0.00 0.00 0.00 2.40 0.00 0.00 0.00 0.00 5.01 0.00 0.00 4.01 72.20 9.00 0.00 7.00 0.01 0.00 0.01 10.01 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.01 11.00 8.01 0.50 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 4.01 0.00 0.00 0.00 0.92 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.02 0.02 6.00 0.00 0.00 2.80 0.00 0.00 1.00 2.92 0.80 0.02 0.00 0.00 0.00 0.00 3.01 0.01 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.30 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.51 0.81 1.01 10.30 3.00 0.00 0.00 0.00 0.03 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 5.00 0.01 0.01 0.01 7.02 0.90 0.03 0.00 0.00 0.00 0.01 0.00 0.00 5.00 0.01 8.71 0.00 0.00 0.00 0.01 0.61 0.00 0.01 2.00 0.00 0.00 0.00 4.02 12.00 0.00 0.00 0.01 0.00 0.00 0.71 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.01 10.00 43.00 21.00 0.10 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 3.01 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 6.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.01 0.00 0.00 0.00 4.01 23.11 0.40 8.00 2.00 0.61 0.01 0.81 3.20 2.20 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.50 0.00 0.00 5.00 0.01 19.00 14.40 1.10 0.00 0.00 2.01 0.81 0.00 0.00 0.00 0.40 0.31 4.00 0.00 0.00 0.20 0.21 0.00 0.00 0.01 0.00 0.00 4.20 0.00 0.00 0.00 0.81 0.00 0.00 0.00 1.00 0.41 0.00 0.00 0.40 12.10 1.71 0.00 0.00 0.00 0.10 0.30 9.41 20.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 21.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.04 0.90 0.01 0.00 4.00 0.02 7.90 2.00 0.01 0.01 4.70 0.71 0.01 0.01 2.20 6.01 0.03 0.80 0.01 0.00 0.01 8.90 0.00 0.00 0.02 0.00 0.00 3.01 0.00 0.00 0.00 0.02 38.20 0.00 0.00 0.91 2.11 0.00 0.01 0.01 13.01 3.50 6.01 0.30 0.00 0.01 2.02 1.00 15.20 9.02 0.00 0.00 0.00 0.00 0.00 0.00 19.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.01 0.00 0.02 0.00 0.01 0.02 0.00 0.00 0.00 0.00 6.00 0.00 0.21 0.00 0.00 0.00 0.00 0.00 0.10 3.00 0.10 0.30 7.01 0.00 0.00 0.00 0.01 5.40 3.00 0.00 0.00 0.00 1.10 0.00 0.00 0.60 0.00 0.20 0.50 0.10 0.00 0.20 0.20 0.00 0.30 0.01 3.40 0.00 3.80 0.00 0.00 0.00 1.00 0.10 0.01 0.00 0.00 2.01 0.00 0.00 0.00 6.20 0.10 0.00 0.00 1.00 0.00 0.00 0.00 2.01 17.01 0.00 0.20 9.00 0.50 0.00 0.00 14.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.10 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 10.00 14.10 18.10 6.01 0.11 0.01 1.10 0.51 0.00 2.00 0.00 0.00 0.02 0.00 0.01 0.00 0.00 0.40 0.00 0.01 0.41 1.40 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 10.00 0.20 0.00 0.00 0.00 4.80 10.00 0.00 0.00 0.00 0.00 0.00 0.72 7.20 0.00 0.01 0.00 0.00 0.00 0.00 0.00 4.80 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00 5.00 0.70 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.01 0.01 0.00 0.00 6.01 0.40 14.40 5.10 0.21 0.02 1.00 4.90 0.00 3.00 0.00 0.00 4.01 0.00 0.51 0.00 0.00 0.01 0.01 0.02 0.00 0.00 0.00 0.80 0.00 0.00 0.00 0.01 0.00 0.01 0.00 0.00 1.00 0.00 0.00 0.00 1.11 8.01 0.80 0.00 0.00 0.00 0.00 3.10 25.20 17.10 1.00 0.31 3.30 0.00 0.00 0.00 4.61 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 3.00 3.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.01 0.01 0.01 13.01 0.00 0.00 0.30 0.61 12.40 2.01 0.01 0.01 0.90 0.10 0.00 0.01 6.00 0.00 0.90 1.01 0.10 0.00 0.00 4.10 0.50 0.50 0.00 5.50 0.00 6.00 0.00 0.00 0.00 0.50 1.31 0.00 0.00 0.00 6.90 0.00 0.00 0.01 2.02 3.01 0.00 0.00 0.00 0.00 0.01 0.00 8.00 0.60 0.00 0.01 0.01 0.01 0.00 0.01 21.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.90 0.00 2.00 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.80 0.31 19.01 6.51 0.02 0.00 0.00 0.01 0.00 0.01 0.00 0.00 0.01 2.01 0.00 0.00 0.00 0.40 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.70 0.10 0.00 0.00 0.00 0.01 0.00 0.00 0.02 5.01 0.20 0.00 0.00 0.00 0.00 0.00 0.60 0.01 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 22.00 0.80 0.00 5.01 0.00 0.00 2.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 17.00 17.10 38.00 1.00 0.00 0.00 7.01 0.00 0.00 0.00 0.00 0.00 2.20 0.00 0.00 0.00 0.01 0.00 0.20 0.00 0.01 0.00 0.00 0.60 0.00 0.00 0.01 0.52 0.00 0.00 0.00 0.01 0.20 0.00 0.00 7.10 0.00 1.01 0.00 0.01 0.00 11.01 0.00 0.00 0.40 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.10 0.00 5.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.00 4.01 0.00 0.00 0.00 10.00 13.40 18.80 6.40 17.50 0.90 41.30 0.00 0.00 0.00 0.00 0.00 0.72 0.20 0.10 0.00 0.00 0.00 0.00 20.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.02 2.00 0.00 0.00 0.00 0.10 0.00 0.00 0.80 5.11 0.00 0.01 5.01 0.01 0.00 0.01 0.00 0.11 0.00 0.00 0.01 0.01 0.00 0.01 3.00 9.20 0.00 4.00 1.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.00 0.00 0.01 0.00 13.01 7.10 2.00 31.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.20 0.02 0.01 0.00 0.00 6.50 5.00 18.70 0.21 13.30 0.10 3.00 2.30 0.00 0.02 0.00 0.01 0.00 0.01 10.01 0.00 0.00 1.00 0.00 0.01 2.11 0.00 0.00 0.00 0.00 0.00 0.00 1.11 0.00 0.00 0.00 1.00 3.50 0.00 0.00 0.00 23.50 4.60 0.01 1.01 0.70 0.40 0.42 13.50 12.20 0.00 0.00 0.01 3.00 0.00 0.01 0.00 5.00 3.00 11.01 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 22.00 2.70 0.00 0.00 6.20 7.10 0.00 34.00 0.00 0.00 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 6.00 7.20 34.01 11.01 4.01 12.01 3.01 11.01 0.00 0.00 0.00 0.00 0.01 3.90 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 11.00 0.00 0.00 0.00 0.00 0.01 0.30 0.00 0.70 7.01 0.01 0.00 0.00 0.00 0.00 0.80 0.70 0.01 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.01 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.00 0.00 0.20 0.00 0.20 6.81 1.00 2.20 2.30 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.02 0.00 0.00 0.00 0.02 0.01 0.02 1.41 3.40 0.00 0.01 2.01 0.01 0.00 1.00 0.00 0.90 0.00 9.01 2.00 0.00 0.00 0.00 0.00 0.20 0.00 0.02 0.30 5.30 2.11 0.01 0.00 0.00 0.00 0.01 0.02 1.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.31 0.00 0.00 0.00 0.00 0.00 0.00 2.00 18.00 0.01 18.01 6.21 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 7.30 0.00 0.00 0.00 0.00 23.00 0.01 0.01 0.00 0.11 0.01 0.10 0.02 0.70 0.50 0.00 0.00 5.20 0.00 0.01 18.40 3.31 0.72 0.00 0.00 0.00 0.00 0.30 0.01 1.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 87.00 5.01 1.30 0.00 2.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.03 0.30 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.00 0.00 0.01 0.01 0.70 0.00 8.00 0.00 0.00 0.01 0.00 6.00 0.01 0.00 0.00 0.01 0.01 0.00 8.01 0.00 0.00 0.70 0.00 6.00 0.00 4.01 57.02 8.10 8.01 4.51 0.00 0.00 0.00 0.01 0.22 6.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.50 0.00 0.00 1.00 0.10 0.00 1.00 111.00 0.00 0.03 0.61 32.01 0.10 0.00 0.00 0.00 0.01 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.01 0.00 0.00 0.00 0.01 4.00 0.10 1.20 5.00 0.00 0.00 0.00 0.01 0.20 0.01 0.00 0.20 0.01 0.60 2.01 0.00 0.00 0.00 0.00 0.40 0.00 0.02 9.02 0.01 0.71 0.00 0.80 0.00 0.00 0.70 2.00 3.10 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 6.30 3.00 0.00 0.00 3.11 0.10 2.01 12.00 11.20 0.00 0.01 0.70 0.00 0.70 0.01 10.10 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.01 0.00 0.00 0.00 0.01 0.00 1.00 9.01 18.00 0.00 0.00 0.00 0.01 15.00 1.50 0.00 0.00 0.01 0.91 4.00 3.00 0.00 0.00 0.00 0.00 0.10 0.00 1.00 8.60 1.50 2.30 25.31 0.00 0.00 0.00 13.00 7.90 8.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.20 7.01 0.00 0.00 0.03 0.00 0.00 42.00 16.10 0.00 0.01 0.00 5.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.01 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 0.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.40 0.00 0.01 7.00 0.00 7.00 0.00 0.00 0.01 0.00 35.01 21.10 0.72 11.30 0.00 0.00 0.00 0.00 0.00 0.22 14.01 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.00 4.00 0.00 0.00 0.00 0.00 0.00 1.00 44.00 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.70 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.01 0.01 2.61 0.00 0.00 0.00 0.00 0.01 3.11 0.00 0.00 0.00 0.50 0.31 2.00 0.00 0.20 0.01 1.11 0.70 0.00 0.01 1.00 0.00 2.01 0.40 0.71 1.30 7.01 0.31 0.10 0.10 0.01 0.81 5.00 11.10 6.00 13.90 0.00 0.00 0.00 3.31 0.00 0.00 0.70 0.00 0.00 0.00 0.00 41.01 6.01 29.60 3.00 8.00 14.60 0.00 7.40 6.00 0.70 0.00 0.00 0.80 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.80 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 4.00 0.00 0.00 0.00 0.01 2.10 0.01 0.00 0.00 3.10 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 3.20 6.70 1.21 32.00 0.00 0.00 59.00 17.01 2.00 3.61 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.80 0.00 0.00 0.11 0.00 0.00 0.01 17.80 0.00 0.00 0.20 19.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.70 0.01 0.00 0.00 0.40 2.20 9.00 0.00 0.00 0.00 0.21 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.10 11.00 4.61 2.71 6.10 0.41 0.00 0.00 0.00 0.00 35.40 45.01 0.80 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.21 0.20 0.00 0.00 0.20 0.80 0.00 1.00 40.01 0.00 0.00 0.01 24.81 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00 0.91 0.00 55.50 15.50 0.00 0.10 0.01 0.00 2.00 0.00 1.00 11.10 11.70 4.40 20.00 0.00 0.00 0.00 0.00 0.01 27.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 33.00 0.21 0.00 0.00 0.00 11.00 0.00 0.30 35.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.70 0.32 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 5.50 0.10 74.00 22.70 0.00 0.00 0.00 0.00 0.00 16.01 4.20 18.00 1.10 0.01 4.00 0.00 0.00 0.00 0.00 0.00 24.00 0.30 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.01 8.80 0.00 0.00 0.00 0.00 0.00 0.00 37.00 0.01 0.00 0.00 12.90 0.00 0.00 0.00 0.70 7.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 2.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.51 0.00 2.90 36.01 0.00 0.01 0.00 0.00 0.00 0.11 0.11 23.20 3.80 28.40 3.00 0.00 0.00 0.00 0.00 0.01 45.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 14.00 19.00 0.00 0.00 0.00 2.00 0.00 7.01 45.00 4.00 0.00 0.00 8.40 4.00 0.00 0.00 1.90 3.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.70 0.00 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 19.00 2.00 50.01 16.10 9.01 0.40 1.01 0.80 0.00 2.00 20.30 5.01 10.00 15.00 0.00 0.00 0.00 0.40 0.00 0.01 46.50 16.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.00 11.01 0.00 0.00 0.00 0.00 0.11 0.00 31.10 16.00 18.00 0.00 42.00 14.01 0.00 2.10 41.02 16.60 4.10 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.31 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.20 0.00 0.00 11.90 9.10 0.51 7.51 5.20 2.80 12.02 0.00 0.00 19.51 17.30 2.01 5.00 45.40 0.01 0.00 0.50 0.00 0.00 0.00 0.12 8.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 6.00 66.40 0.00 0.00 0.00 0.00 0.01 0.01 22.01 24.01 0.01 0.61 47.00 13.01 1.90 2.00 0.62 15.10 1.21 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 4.00 14.00 0.00 2.80 0.00 1.61 52.90 0.40 6.50 22.00 0.00 0.00 19.00 2.01 8.80 9.50 4.01 2.01 0.00 0.00 0.00 0.00 0.00 26.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.11 4.01 0.00 0.00 0.00 2.00 0.00 28.00 15.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 7.30 0.41 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.60 3.00 0.01 0.00 0.60 0.01 22.00 32.40 0.30 58.11 0.70 0.00 0.00 6.50 2.21 17.01 5.90 0.00 7.01 1.20 0.00 0.00 0.00 0.00 33.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 39.01 0.00 0.00 24.01 2.10 0.00 0.00 0.00 0.00 0.00 13.00 34.01 0.00 0.00 0.00 0.03 0.00 0.00 0.00 4.02 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.02 0.00 0.00 0.00 0.00 3.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 14.00 0.00 12.91 20.90 0.00 0.00 0.00 0.00 0.00 0.22 5.00 6.00 0.11 0.00 0.31 0.00 0.01 0.00 0.00 0.01 12.31 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 27.01 9.01 0.00 0.00 0.00 0.00 0.00 0.00 31.30 0.10 0.00 0.00 22.00 3.00 0.00 0.20 47.20 5.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 1.10 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.30 0.60 0.00 6.50 0.40 1.30 27.10 0.00 0.00 0.00 0.00 0.00 0.02 1.20 17.02 0.71 42.01 0.01 0.00 0.00 0.00 0.00 0.01 28.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.00 4.00 0.00 0.00 0.00 1.00 0.00 0.01 20.01 0.00 0.00 0.00 15.00 0.01 0.00 0.00 6.01 4.01 0.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.51 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.02 0.01 0.01 4.01 0.00 15.10 70.01 0.00 3.01 3.00 0.00 0.00 0.60 19.31 4.02 74.10 17.01 0.80 0.00 0.00 0.00 0.00 0.00 21.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 11.01 0.11 0.00 0.00 0.00 0.61 0.00 1.01 51.00 0.00 0.00 0.00 10.40 0.00 0.00 0.00 21.02 4.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.31 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 35.01 2.01 19.00 19.00 0.01 0.01 23.00 7.00 0.00 0.00 24.00 2.00 2.00 1.12 0.01 15.00 3.01 0.01 0.00 0.00 5.00 15.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 28.00 23.00 0.00 0.00 0.00 0.00 0.00 0.00 30.00 0.00 0.00 0.00 67.00 14.00 0.00 4.00 1.00 10.30 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 20.00 0.00 3.70 12.10 0.00 0.00 0.00 0.00 0.00 18.00 58.00 7.00 6.00 61.00 6.01 0.00 0.50 0.50 4.00 0.00 2.02 10.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 17.01 79.00 0.00 0.00 0.00 0.00 0.00 0.00 23.60 0.00 0.00 0.00 52.00 8.00 0.00 2.01 1.01 26.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.10 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 3.00 0.02 0.00 0.00 23.11 4.31 3.30 17.30 0.40 6.00 1.50 6.01 0.00 2.01 95.00 0.31 0.01 0.01 4.00 2.50 0.00 2.00 0.01 0.00 4.00 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 8.01 38.40 0.00 0.00 0.00 0.00 0.01 0.00 10.01 0.00 0.01 0.00 58.00 17.10 0.00 5.10 0.90 8.51 0.10 0.00 0.00 0.01 0.00 0.00 0.00 0.00 4.20 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 3.00 0.00 0.00 35.81 3.11 13.00 8.11 0.02 0.00 27.10 19.00 0.00 18.01 45.00 3.01 15.00 23.00 0.01 0.01 0.00 0.00 0.01 0.00 0.12 7.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 42.00 81.00 0.00 0.00 0.00 0.00 0.00 0.00 12.01 2.00 0.00 0.00 45.00 18.01 0.00 5.10 0.91 14.21 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 1.41 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.00 4.00 0.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 1.00 0.00 0.00 0.00 32.00 11.00 1.01 19.10 0.81 22.00 51.90 0.31 0.00 68.00 0.61 0.81 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.40 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.50 58.00 0.01 0.90 11.01 3.00 0.00 0.01 30.10 0.00 10.00 41.00 51.00 3.51 9.00 3.10 0.10 60.10 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.60 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 7.20 0.00 32.00 69.60 0.00 18.00 5.00 0.00 0.00 0.01 13.00 2.02 21.80 0.12 16.10 0.00 0.00 0.00 0.00 0.00 45.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.00 3.40 0.00 14.00 0.01 0.00 0.00 0.00 0.21 0.00 97.00 6.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 7.50 2.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 0.00 19.50 93.00 0.00 2.00 3.00 0.00 0.00 0.01 24.50 1.00 29.01 0.21 0.00 0.00 0.00 0.00 0.00 0.00 52.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 8.40 0.00 0.00 0.00 0.00 0.00 0.00 5.51 10.00 0.00 0.00 0.00 4.10 0.00 0.00 0.00 5.00 4.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 23.00 0.01 5.71 14.10 0.00 0.61 1.00 0.00 0.00 0.00 0.80 3.00 0.01 29.01 0.00 0.00 0.00 0.00 0.00 0.00 41.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.20 0.00 53.00 17.00 0.00 0.00 0.00 0.00 0.00 0.00 11.30 0.00 0.00 0.00 16.00 0.00 0.00 0.00 7.11 12.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.20 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.10 23.31 0.41 0.51 37.00 0.00 0.00 10.00 0.00 0.00 0.00 0.30 0.70 2.10 13.00 0.01 0.00 0.00 0.00 0.00 0.00 42.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.50 0.00 26.00 12.70 0.00 0.00 0.00 0.00 0.00 0.01 27.50 0.00 0.01 0.01 19.50 0.80 0.00 25.00 28.01 27.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 7.00 0.00 20.00 0.01 19.41 0.00 0.02 28.20 0.51 0.01 12.01 0.00 0.00 0.00 5.10 0.20 7.00 20.00 0.00 0.00 0.00 0.01 0.01 0.00 44.01 3.01 0.00 0.00 0.00 0.00 0.00 0.00 0.32 0.11 0.00 0.00 0.00 8.40 71.00 0.00 0.22 2.01 0.01 0.00 7.02 31.01 4.10 4.01 19.40 109.00 1.10 1.00 2.01 12.00 46.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 17.01 2.50 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.00 0.00 0.00 12.00 0.50 5.00 0.00 24.00 1.80 0.50 25.00 1.10 0.00 28.80 0.20 0.00 59.00 15.00 0.02 0.00 0.00 0.30 0.00 0.00 0.00 0.02 0.00 2.00 22.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 2.50 0.00 0.00 0.00 0.22 67.00 0.20 3.00 0.20 0.00 0.00 0.21 56.30 2.01 6.10 24.00 84.00 4.80 10.20 2.01 1.50 106.00 3.60 0.00 0.00 0.00 0.00 0.00 0.70 0.01 4.00 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.20 0.00 0.00 0.01 0.40 0.20 0.01 31.00 0.70 0.01 25.00 2.00 0.00 22.00 2.00 0.00 0.00 2.20 0.01 13.00 2.12 0.00 0.00 0.00 0.01 2.90 0.00 23.00 7.20 0.00 0.00 0.00 0.00 0.00 0.00 0.92 0.31 0.00 0.00 0.00 0.00 109.01 0.20 0.32 0.50 0.00 0.00 5.31 58.00 7.00 24.10 29.00 103.00 4.90 2.00 4.01 1.80 77.31 2.01 0.00 0.00 0.00 0.00 0.00 0.01 0.01 7.10 18.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 5.80 0.00 0.00 0.00 0.00 0.00 0.10 13.80 0.00 0.12 43.01 0.00 0.00 0.51 0.00 0.00 0.00 0.00 3.02 11.40 2.60 0.00 0.00 0.00 0.00 0.01 0.00 60.00 0.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 18.01 0.00 76.00 3.11 0.00 0.00 0.00 0.00 0.00 8.00 37.01 0.00 5.10 2.00 30.01 0.00 0.00 0.00 33.70 64.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 18.21 12.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.12 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.23 9.00 0.00 0.00 0.02 0.00 0.00 0.01 22.00 0.00 0.02 37.01 0.11 0.00 0.02 0.00 0.00 0.00 0.00 0.02 0.03 0.02 0.00 0.00 0.00 0.01 2.00 0.00 29.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 0.02 0.00 7.00 0.00 5.00 18.01 0.00 1.02 0.00 0.00 0.01 20.41 14.01 0.00 12.60 35.00 143.00 0.01 0.00 0.00 4.01 22.40 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 26.00 111.50 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 4.00 0.00 0.00 0.00 0.00 0.00 0.01 32.02 0.10 0.11 68.91 0.02 0.00 1.00 0.00 0.02 0.00 0.01 0.31 2.00 5.01 0.00 0.00 0.00 0.00 0.11 0.00 32.00 1.10 0.00 0.00 0.00 0.00 0.00 0.00 0.70 0.50 0.00 0.02 0.00 15.00 42.01 0.00 0.80 0.01 0.00 0.00 6.01 37.00 0.00 16.01 34.01 116.00 0.10 0.00 0.11 11.01 24.20 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 2.01 7.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.51 10.00 0.00 0.00 13.00 0.00 0.00 5.01 17.60 0.00 0.11 29.01 0.02 0.00 0.01 0.00 0.00 0.00 0.00 0.01 86.00 0.21 0.00 0.00 0.00 0.40 4.00 0.00 40.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.01 0.00 6.10 0.00 13.00 6.03 0.00 0.42 0.00 0.00 0.00 14.02 30.00 0.00 7.00 15.71 42.10 0.00 0.00 0.00 29.00 17.90 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.31 22.00 0.00 0.00 0.00 0.00 0.30 0.90 1.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.01 20.00 0.00 0.00 0.00 0.10 8.00 4.30 0.00 0.00 2.30 0.00 9.01 55.01 0.00 0.30 0.00 0.00 3.00 0.00 0.01 5.00 17.00 0.01 0.60 0.00 3.00 3.10 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.90 0.00 1.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.00 9.00 3.30 0.00 0.01 0.31 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 2.01 0.00 0.20 0.00 0.00 0.21 4.00 0.00 2.00 0.00 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 2.01 15.00 0.00 4.90 0.00 0.30 3.01 12.00 0.00 0.00 0.00 24.01 0.10 0.00 24.00 5.10 2.00 0.00 0.00 0.02 3.00 0.00 0.00 0.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 35.00 2.90 1.70 0.01 9.00 2.10 0.00 0.00 0.00 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.80 0.00 6.70 0.00 9.00 0.00 0.00 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 0.10 0.00 0.01 11.00 0.00 10.00 0.01 0.00 3.01 25.00 0.22 0.02 0.00 0.30 0.00 0.01 3.30 30.80 0.01 0.01 0.00 0.00 0.00 0.00 0.01 0.70 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.41 0.00 0.00 0.00 0.00 5.00 0.01 0.00 19.00 1.61 2.21 0.00 30.00 9.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.01 0.30 0.00 0.00 0.01 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.02 5.00 0.00 0.41 0.00 27.00 3.21 0.00 0.00 0.00 0.00 0.01 0.00 0.00 23.01 10.00 5.60 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 23.21 16.70 0.70 0.00 0.60 3.51 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.30 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.20 0.00 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.61 0.01 3.60 93.00 8.80 0.00 0.00 0.00 0.70 0.01 0.00 22.61 0.42 3.20 0.00 0.00 0.00 0.00 0.00 0.00 7.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.61 1.01 0.00 0.00 0.00 0.00 0.00 0.00 9.01 4.90 0.01 0.00 16.00 4.10 0.00 0.00 0.00 6.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.40 0.00 0.81 0.00 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.00 0.01 1.90 0.00 3.01 0.01 0.80 0.10 19.40 0.02 0.41 0.00 12.00 0.02 17.01 2.31 0.40 0.01 0.01 0.00 0.00 0.00 3.00 0.01 2.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.11 0.01 0.00 0.00 0.00 6.00 0.00 0.00 14.00 13.01 0.72 0.00 20.00 6.32 0.00 0.01 0.00 0.01 0.00 0.00 0.01 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.62 0.01 0.31 9.20 0.01 0.00 0.01 0.00 27.01 7.00 39.02 0.21 25.50 15.00 0.00 0.00 0.00 0.00 0.00 0.01 49.30 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 20.10 0.00 0.00 0.00 0.00 0.00 0.00 32.00 5.01 0.01 0.00 19.01 3.01 0.00 0.00 0.01 15.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 0.00 2.50 17.40 3.41 1.00 0.00 0.00 0.00 11.00 17.00 5.10 23.01 1.00 0.00 0.00 1.00 1.01 1.00 0.00 24.00 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 2.00 37.00 0.00 0.00 0.00 0.00 0.00 0.00 9.00 16.00 0.00 0.00 46.00 13.01 0.00 0.20 0.50 14.90 7.80 0.50 0.00 7.00 0.00 0.00 5.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.30 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 90.70 2.01 4.00 0.01 0.00 34.00 16.03 11.40 42.00 1.01 0.01 0.01 0.00 2.00 0.00 0.01 0.00 19.00 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.60 0.00 0.00 49.01 1.50 0.00 0.00 0.00 0.00 0.00 0.00 26.00 21.00 0.01 0.00 35.00 8.20 0.00 0.20 0.10 6.20 5.00 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 6.01 0.00 0.00 0.00 0.00 5.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 5.50 0.00 6.00 0.20 0.00 3.10 18.60 26.00 0.00 0.01 7.00 36.80 1.11 7.80 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 34.00 19.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 3.00 0.00 0.00 68.00 45.00 0.00 0.00 0.00 0.00 0.00 1.80 19.10 4.80 0.01 0.00 12.10 15.40 5.11 0.20 4.00 26.20 11.30 0.20 0.00 0.22 0.00 0.00 0.00 4.00 0.00 0.00 0.00 0.00 0.00 0.00 4.30 0.01 0.80 0.00 0.00 2.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.01 0.00 0.00 0.00 0.00 6.00 2.01 0.00 3.01 0.02 0.00 8.01 18.60 6.80 0.00 0.01 0.00 6.40 4.00 7.01 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.01 52.00 23.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13.10 0.00 0.00 94.70 29.00 0.00 0.00 0.00 0.10 0.00 0.40 26.01 0.31 3.01 1.01 7.10 10.01 9.10 0.01 32.10 28.10 31.00 0.40 0.00 2.01 0.00 0.01 0.00 4.00 0.00 0.00 0.00 0.00 0.00 0.00 12.31 0.00 0.90 0.10 0.20 0.31 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.02 20.91 0.00 2.00 11.00 4.00 0.40 0.00 0.00 17.30 10.81 6.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.60 20.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 12.00 0.00 0.00 56.00 20.00 0.00 0.00 0.00 12.00 0.01 0.01 1.00 0.20 0.70 3.01 4.40 8.30 28.40 0.00 22.00 11.00 4.00 0.00 0.00 0.11 0.00 0.00 0.00 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 2.00 2.01 0.02 1.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 10.81 0.00 0.00 1.02 0.01 0.00 0.31 0.00 0.00 0.01 2.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 10.60 19.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16.40 20.00 0.00 0.00 0.01 3.00 0.00 0.00 2.10 3.00 0.00 1.80 1.00 21.01 6.31 1.10 5.00 11.10 1.51 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.40 0.00 0.01 0.00 0.00 1.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.60 0.01 0.00 8.10 2.01 0.00 5.12 12.00 12.60 0.70 0.00 0.00 25.20 7.81 15.50 0.01 0.00 0.00 0.61 0.00 0.00 0.00 2.00 65.30 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 2.00 49.01 0.00 0.00 0.00 0.00 10.00 0.01 7.01 13.00 12.60 1.00 12.60 12.40 13.00 0.01 5.11 8.60 2.70 3.31 0.00 0.50 0.00 0.00 0.00 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 2.00 0.00 0.00 8.00 4.10 4.00 7.80 3.01 18.01 7.00 18.00 0.00 10.01 10.50 1.00 0.01 0.00 0.00 0.20 0.00 0.00 0.00 0.01 34.01 7.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 0.70 0.00 0.00 3.00 90.50 0.00 0.00 0.00 0.00 10.01 0.01 14.30 23.10 17.00 2.20 22.00 6.90 15.00 0.80 1.32 14.60 2.50 3.21 0.00 0.00 0.00 0.00 0.00 0.70 0.01 0.00 0.00 0.00 0.00 0.00 2.20 0.00 0.00 0.00 0.00 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.41 0.00 0.00 0.00 0.00 0.01 0.03 0.00 4.70 1.01 0.00 1.31 7.60 8.00 1.00 0.00 0.00 14.90 6.01 25.00 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 79.11 8.71 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 33.30 32.10 0.00 0.00 0.00 0.00 0.00 13.00 5.01 3.00 4.90 2.61 12.01 4.01 10.01 0.02 5.01 20.00 2.00 4.00 0.00 2.01 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.30 0.00 0.30 0.00 0.00 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.90 0.00 0.00 0.00 0.00 15.00 0.20 0.00 12.00 22.01 33.00 2.31 6.50 9.40 13.10 0.00 0.00 16.30 17.00 0.10 0.01 0.00 4.00 2.00 0.00 0.00 0.00 0.00 0.70 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.40 40.00 0.00 7.00 3.10 0.00 5.00 0.00 13.00 10.10 0.01 22.60 13.00 7.00 9.01 19.00 1.00 19.00 1.11 2.00 0.02 1.00 0.00 0.00 0.00 0.50 0.02 0.00 0.00 0.00 0.00 0.00 2.01 0.00 0.02 0.00 0.00 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 0.01 12.50 0.00 0.00 16.00 16.01 4.00 3.00 2.40 3.01 6.50 2.10 0.40 6.10 5.01 0.51 5.00 0.01 0.60 0.02 5.00 0.10 4.00 0.00 0.31 21.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.31 0.00 0.00 2.00 41.10 3.00 2.00 9.02 0.90 0.00 0.00 14.01 0.01 0.01 13.61 7.70 7.00 47.10 0.30 18.02 50.00 15.50 3.50 0.00 0.70 0.00 0.00 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 6.00 0.00 0.00 0.00 0.00 16.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.80 0.00 0.00 0.00 5.00 2.00 0.00 0.00 17.30 23.00 2.10 2.00 3.90 10.10 2.90 9.11 0.00 0.61 3.00 11.20 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 1.30 17.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.01 0.00 0.00 3.20 43.00 4.60 0.00 18.00 1.10 0.90 0.20 7.10 0.00 0.00 1.80 2.10 23.00 19.00 9.30 0.20 44.00 11.40 7.00 0.00 0.10 0.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.91 0.60 2.10 25.60 0.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.10 3.50 9.30 0.00 0.11 3.51 0.00 0.00 0.01 0.00 0.00 0.00 1.30 0.00 0.20 0.00 0.00 0.00 0.00 0.01 0.00 5.00 18.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.00 25.00 44.01 3.10 0.00 4.41 10.02 0.30 0.01 2.40 0.00 0.00 2.01 3.00 42.21 8.70 0.60 12.11 13.00 16.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 2.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.02 0.00 0.01 0.00 18.00 16.31 9.00 9.50 5.70 0.51 6.30 3.01 0.00 16.91 4.00 0.20 0.00 7.00 18.00 3.00 0.01 0.00 20.31 0.00 0.01 24.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 18.00 0.00 0.00 4.00 43.70 0.00 0.80 27.10 0.90 0.00 0.80 29.00 0.00 0.90 35.00 36.00 1.10 9.00 8.10 0.30 50.00 3.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.10 0.00 0.01 0.00 0.00 8.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.00 0.00 0.00 5.01 0.00 0.00 0.00 10.00 27.10 7.30 7.30 1.10 33.10 3.61 0.70 0.00 11.70 0.90 2.80 0.90 0.00 0.70 0.01 0.00 0.00 2.60 0.00 0.01 22.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.51 11.00 0.00 0.00 6.00 85.00 1.00 0.60 8.20 4.01 0.00 0.01 21.50 0.00 0.10 15.40 12.51 7.01 42.11 0.00 0.21 52.00 35.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 1.50 0.00 0.00 0.00 0.00 0.01 0.01 0.00 1.01 0.00 0.00 6.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.31 2.00 0.00 0.00 11.00 0.00 0.00 0.00 25.81 6.41 5.00 12.30 4.90 2.02 39.01 0.11 0.00 17.00 3.60 0.00 0.00 3.00 0.00 0.00 0.00 0.00 39.20 0.00 0.50 14.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.00 0.81 0.00 0.00 0.30 54.00 2.00 0.02 10.00 2.01 0.00 1.00 56.01 3.01 5.50 44.00 21.30 5.30 26.10 0.72 0.22 65.00 52.01 0.80 0.01 0.00 0.00 0.00 0.00 0.01 2.20 1.01 0.00 0.00 0.00 0.00 2.00 0.00 0.01 0.00 0.00 6.00 0.00 0.00 0.00 0.00 0.00 12.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.21 0.00 0.00 0.00 12.40 10.30 6.41 5.50 4.60 8.01 3.21 0.70 0.60 9.00 0.80 0.00 0.00 0.71 0.00 0.01 0.00 0.00 2.81 0.00 3.00 18.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.01 0.81 8.01 0.00 10.00 19.00 2.70 0.01 14.00 0.10 3.00 5.00 18.02 0.01 1.30 4.80 0.01 13.01 50.10 0.01 0.00 25.00 4.20 7.00 0.00 0.10 0.00 0.00 0.00 0.00 2.00 0.60 0.00 0.00 0.00 0.00 0.00 0.00 26.00 0.00 0.00 0.00 0.00 2.50 0.01 5.70 11.00 0.20 0.00 0.01 1.10 0.01 10.20 0.01 0.00 0.00 1.70 0.00 4.00 0.01 4.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.10 0.00 0.00 10.91 6.31 6.01 0.71 2.70 0.00 0.00 0.60 33.00 8.01 8.71 0.31 7.01 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 2.00 4.01 0.00 0.00 0.00 10.00 14.00 3.20 0.00 0.00 0.00 0.00 0.10 0.60 1.00 11.01 0.70 0.00 7.10 23.40 0.90 3.00 4.00 0.00 0.00 0.00 5.10 0.00 0.30 20.20 0.10 0.00 0.00 0.00 1.00 0.00 3.71 2.20 0.90 0.00 0.01 2.10 0.00 33.00 9.01 19.00 0.00 16.00 0.00 2.30 6.00 0.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 13.31 0.00 0.00 0.01 11.00 16.91 0.00 2.02 0.00 0.00 0.00 23.00 0.81 11.00 0.00 14.20 0.10 0.91 0.20 0.00 0.00 0.20 0.00 0.00 0.00 2.30 0.00 0.00 0.00 0.00 0.00 0.00 0.70 0.00 0.00 0.00 3.01 0.70 0.00 0.00 0.00 0.00 0.00 0.20 0.10 0.10 8.00 0.30 0.00 0.01 13.01 1.21 0.00 0.00 0.00 0.00 0.00 2.00 0.02 0.12 21.02 0.01 0.00 0.00 0.00 0.50 0.00 0.41 1.31 0.01 0.02 0.01 0.01 0.00 23.01 35.00 23.00 0.90 11.00 0.10 3.20 1.80 0.03 0.10 0.00 0.00 0.00 0.00 0.00 0.00 1.00 9.30 0.10 0.00 0.00 0.01 41.00 5.00 0.00 0.00 0.00 0.00 34.00 6.00 2.12 0.01 14.90 0.02 0.01 0.10 3.00 0.21 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.21 0.01 0.00 0.01 0.10 0.00 0.00 0.00 5.01 0.00 0.00 0.00 0.00 0.00 0.00 26.00 0.10 0.60 28.01 4.02 0.00 0.01 23.10 1.01 0.00 0.02 0.00 0.00 0.00 0.01 0.00 0.00 2.70 0.00 0.00 0.00 0.00 0.50 0.00 1.01 0.33 0.01 0.00 0.00 0.01 0.00 4.00 9.00 39.10 0.00 0.01 15.11 1.00 11.30 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 7.61 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 11.01 3.21 0.00 10.50 7.01 0.40 0.01 0.00 2.00 0.00 0.00 0.00 0.00 0.20 0.00 0.01 0.01 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 4.50 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.20 3.70 1.01 0.00 0.01 18.10 11.01 0.00 6.00 0.00 0.00 0.00 1.00 0.00 2.01 17.50 0.00 0.00 0.00 0.00 0.00 0.00 9.00 0.11 0.00 0.00 0.00 0.00 0.00 3.00 6.60 21.00 0.00 3.00 0.40 0.50 2.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13.01 16.00 0.00 0.00 1.70 12.20 2.00 0.00 0.00 0.00 0.00 14.00 8.30 0.01 0.00 0.02 0.00 0.00 0.03 2.00 0.02 0.01 0.00 0.00 0.00 4.01 0.00 0.00 0.42 0.00 0.00 0.00 0.02 0.00 0.00 0.00 2.01 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.01 0.00 22.01 3.01 0.00 0.01 24.30 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.60 0.00 0.00 0.00 0.00 0.00 0.00 4.00 0.10 0.00 0.00 0.00 0.01 0.00 1.00 12.11 2.12 0.00 0.00 17.10 0.01 22.01 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.20 0.01 0.00 2.01 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.60 0.00 0.00 0.00 0.00 0.00 28.00 0.00 2.01 9.01 0.01 0.10 12.00 0.10 0.00 0.00 0.00 0.00 0.10 36.00 9.01 0.00 0.01 18.20 0.70 0.00 1.41 0.00 0.00 0.00 0.00 0.00 0.02 21.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.02 15.01 1.01 0.00 0.70 0.00 0.01 24.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.60 2.30 0.00 0.00 3.00 16.00 0.10 0.00 0.00 0.00 0.00 0.00 9.00 0.01 1.20 0.00 0.02 0.71 3.31 0.01 0.00 2.01 0.00 0.00 0.00 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.61 0.70 0.01 22.00 0.00 0.00 0.00 0.00 0.00 0.00 16.01 1.00 0.00 0.00 7.00 0.00 0.00 0.10 0.00 0.00 0.00 0.00 0.01 0.00 1.31 8.00 0.10 0.00 0.00 0.00 0.00 0.90 0.50 0.00 0.00 0.00 1.00 0.30 0.01 15.81 16.00 0.10 0.00 1.01 0.00 14.02 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.60 2.01 0.00 0.00 2.00 2.01 0.00 0.00 0.00 0.00 0.00 0.00 37.00 0.00 0.01 8.00 0.00 0.00 0.01 2.01 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.60 0.00 0.00 0.00 0.00 0.00 3.00 0.00 0.00 9.00 0.00 0.70 11.01 0.20 0.00 0.00 0.00 0.00 0.00 29.12 17.00 0.00 0.00 14.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.02 2.02 0.40 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 5.50 0.01 1.21 3.20 0.00 0.10 0.10 0.00 4.31 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.90 0.40 0.00 16.00 6.40 0.00 0.00 0.00 0.00 0.00 0.00 12.01 0.00 14.41 16.00 0.01 0.20 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.31 0.00 6.50 21.10 0.01 0.01 2.60 0.00 0.00 0.00 0.00 0.00 0.00 23.01 2.40 0.00 0.00 13.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.01 7.71 0.11 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.01 0.01 14.40 0.61 0.00 1.00 0.60 0.00 6.02 2.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 0.00 14.00 0.00 0.00 5.70 22.00 0.00 0.00 0.00 0.00 0.00 0.00 16.01 0.00 16.10 0.80 0.00 0.90 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 7.30 20.00 0.00 0.01 2.20 0.00 0.00 0.00 0.00 0.00 0.00 21.01 2.01 0.00 0.00 15.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 34.60 0.10 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.31 0.02 16.10 0.00 0.00 0.50 0.01 0.00 18.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.30 0.00 0.00 27.00 4.60 2.00 0.00 0.00 0.00 0.00 0.00 0.81 0.00 2.50 0.00 0.01 0.00 0.00 0.00 0.00 0.70 0.00 0.00 0.00 0.00 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.31 0.00 15.20 7.91 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 4.02 0.00 0.00 17.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 5.00 29.90 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.61 22.80 0.60 0.00 0.20 0.60 0.00 11.01 0.00 0.02 0.40 0.00 0.00 0.00 0.01 0.00 0.00 0.00 8.50 0.00 0.00 10.00 44.00 0.00 0.00 0.00 0.00 0.00 0.00 11.00 0.00 0.90 0.00 0.02 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 7.00 54.80 0.00 0.00 0.00 0.00 0.00 0.00 1.00 11.00 31.20 0.60 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 0.30 0.00 0.00 6.00 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.20 0.00 2.01 0.01 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.02 0.01 0.01 15.20 0.00 0.00 0.00 0.00 0.60 0.50 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 10.10 0.40 0.10 10.00 1.01 0.00 0.00 0.00 0.00 0.00 0.00 29.00 0.00 22.90 2.00 0.01 0.00 0.00 0.00 0.00 0.11 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 36.10 0.00 17.90 1.41 0.00 6.00 23.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.71 0.00 0.00 18.01 0.01 3.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 4.31 1.60 2.00 0.10 0.00 0.02 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.01 0.00 0.42 14.10 0.00 0.00 0.80 0.00 3.01 0.20 0.01 0.22 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.01 0.00 0.00 2.02 14.00 0.00 0.00 0.00 0.00 0.00 0.00 10.50 0.00 6.61 0.20 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 57.00 5.00 0.01 15.10 3.11 0.01 2.00 6.90 0.00 0.00 0.00 0.00 0.00 0.00 0.01 2.02 0.00 0.00 11.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 28.00 12.00 5.00 0.51 2.51 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 5.01 7.10 0.00 0.00 0.00 0.00 8.00 24.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.00 8.70 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 28.00 0.01 27.40 0.00 5.00 0.01 0.00 0.00 0.30 0.00 0.00 0.00 0.00 22.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.02 0.00 22.00 12.20 0.00 6.20 27.20 4.10 0.00 0.00 0.00 0.00 0.00 0.01 21.90 0.00 0.00 2.40 0.00 2.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 2.00 19.00 4.20 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.01 6.00 0.00 0.00 0.00 9.00 0.00 2.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 5.80 12.00 2.00 0.00 0.01 1.90 0.01 0.00 4.00 30.00 0.00 0.00 3.00 1.00 0.01 0.00 0.00 0.00 0.00 0.00 0.01 0.00 24.80 22.40 4.00 0.00 32.02 10.00 0.00 0.00 0.00 0.00 0.00 0.00 4.41 1.00 0.00 0.00 0.00 0.60 12.00 0.10 0.00 0.00 0.00 0.00 8.00 5.00 0.00 0.00 0.00 0.00 0.00 0.00 0.60 0.01 0.00 0.00 0.00 0.00 0.00 2.50 10.00 0.00 0.00 0.01 0.01 1.00 3.01 0.00 0.00 29.32 7.00 9.21 3.01 0.20 1.00 0.00 0.00 42.00 0.00 0.20 6.01 5.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.11 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.00 0.01 0.00 21.01 15.70 4.20 0.00 0.01 0.02 0.00 0.00 0.01 0.00 0.00 0.00 0.01 0.01 0.00 0.00 4.20 0.00 0.30 0.00 0.00 9.30 2.00 0.00 1.01 4.00 3.02 0.91 6.10 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.01 0.02 0.00 0.00 0.81 0.00 0.70 13.00 4.00 0.02 9.01 0.00 0.00 0.00 0.00 0.01 0.00 0.11 2.00 0.01 0.90 0.30 0.00 0.00 0.00 0.00 0.00 0.00 15.01 0.00 14.01 0.00 0.00 0.00 0.30 0.01 0.00 0.02 0.00 0.00 0.00 0.00 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.00 18.20 0.70 0.00 2.20 19.30 0.00 0.00 0.00 0.11 0.00 0.00 0.30 0.20 0.00 0.00 7.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.10 11.00 0.61 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.01 0.01 0.00 0.00 0.10 0.00 0.50 0.01 0.00 83.00 0.00 0.00 0.01 1.40 0.70 0.00 0.00 14.02 0.01 0.00 0.50 10.02 0.00 0.00 0.00 0.00 0.00 0.00 5.01 0.01 8.10 0.20 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 44.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 14.00 9.70 0.01 0.00 5.00 13.11 0.00 0.00 0.00 0.00 0.00 0.00 25.00 0.31 0.00 0.00 1.50 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 1.01 10.71 0.90 10.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.81 0.00 0.01 0.41 0.00 0.01 0.10 0.00 9.01 31.01 0.03 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 22.00 6.72 0.01 0.02 0.01 0.00 0.00 0.00 0.00 0.00 0.00 8.00 0.00 14.10 1.00 3.00 0.00 1.00 0.00 0.00 1.21 0.01 0.00 0.00 33.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 4.60 0.01 28.01 4.01 0.00 0.02 14.60 2.10 0.00 0.00 0.02 0.00 0.00 0.10 1.30 0.00 0.00 8.00 0.00 3.00 0.00 0.00 0.00 0.00 0.00 0.80 4.00 2.90 15.02 8.81 0.20 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.02 0.10 0.00 0.00 0.01 0.00 0.00 0.03 0.01 0.10 0.00 0.00 0.00 0.00 0.00 0.01 12.10 0.00 0.02 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8.01 2.00 4.51 0.00 0.00 0.01 0.10 0.00 3.00 0.00 0.02 0.00 0.00 3.00 0.20 0.00 0.01 0.00 0.00 0.01 0.00 0.00 0.00 64.10 11.70 2.01 0.01 22.00 0.40 0.00 0.01 0.01 0.00 0.00 0.00 1.30 0.00 0.00 0.00 2.00 4.00 0.01 0.00 0.00 0.00 0.00 6.10 0.00 1.40 2.90 5.80 2.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.01 0.50 2.01 19.30 0.00 0.00 0.00 0.00 0.01 0.00 0.00 7.60 6.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.10 0.01 2.01 0.00 0.00 0.00 0.50 0.90 7.01 0.01 2.20 0.00 0.00 14.00 1.00 0.00 0.00 0.00 0.00 10.00 0.11 0.00 2.00 39.00 7.40 4.00 0.00 22.01 1.11 0.00 0.00 13.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.10 18.00 17.20 1.51 2.00 0.30 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.80 0.00 0.00 0.00 0.00 0.00 16.10 0.11 0.10 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.03 33.00 0.00 0.00 0.00 12.00 0.00 0.30 0.00 26.00 0.00 0.00 0.00 0.70 0.02 0.00 0.01 0.00 0.00 34.30 0.00 0.00 21.90 15.01 0.11 0.00 25.00 15.10 0.20 0.10 0.00 0.00 0.00 0.00 0.62 0.10 0.00 0.00 0.00 4.00 0.80 0.70 0.00 0.00 0.00 5.00 0.00 7.00 0.50 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 900.00 5.00 0.01 18.62 0.10 0.00 2.00 2.20 1.60 0.00 0.00 5.00 6.01 1.00 9.10 34.00 0.00 0.00 0.00 0.00 1.00 0.00 1.00 0.00 10.00 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.01 0.00 0.00 0.00 0.00 0.01 0.00 0.00 21.00 4.20 9.11 0.00 14.00 32.91 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.00 0.00 0.00 0.00 0.01 0.00 7.31 0.00 7.00 1.00 0.60 0.90 0.00 0.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.01 13.60 0.01 43.00 0.00 0.00 0.00 11.10 0.01 0.02 0.00 0.01 21.01 13.00 0.31 0.00 0.00 0.02 0.00 0.00 0.00 0.00 3.01 0.21 0.00 0.00 0.01 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 3.00 18.30 0.00 0.00 0.00 0.00 0.01 0.00 0.00 9.01 9.40 9.50 2.40 9.00 11.32 0.40 0.00 0.00 0.11 0.00 0.00 0.01 2.01 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.01 0.00 0.00 7.00 0.01 3.01 1.60 15.40 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.20 4.00 11.20 0.10 0.00 0.00 0.00 0.00 0.11 0.00 0.00 17.60 1.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.20 0.20 0.30 0.00 0.10 0.01 0.01 0.00 5.00 0.01 0.20 0.00 0.01 6.00 2.10 0.00 0.00 0.00 0.00 0.00 0.00 0.50 5.00 19.40 1.50 9.30 0.01 17.00 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.10 0.01 0.70 0.00 0.00 0.00 0.00 3.60 2.00 5.01 0.00 6.52 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.21 0.00 8.20 0.00 0.00 0.00 30.80 1.30 0.40 0.00 0.00 1.31 0.51 1.00 0.00 0.00 0.02 0.00 0.00 0.00 0.00 6.00 2.10 0.10 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.40 0.00 0.00 0.00 22.40 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.01 13.10 3.20 2.01 0.32 22.70 3.10 0.00 0.00 0.00 1.21 0.00 0.00 5.00 0.00 0.00 0.00 0.00 2.50 0.00 0.00 0.00 0.00 0.00 8.00 0.00 3.60 8.20 0.02 16.10 0.00 0.00 1.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.02 0.00 0.01 0.01 0.00 0.00 0.01 12.60 8.00 8.60 0.00 0.00 0.00 0.00 0.02 0.01 0.00 8.20 11.30 0.00 0.00 0.00 0.20 0.00 0.00 0.00 0.00 0.30 1.00 57.40 0.00 0.00 0.00 0.02 0.00 2.10 5.00 0.02 0.00 0.00 0.00 5.21 0.90 0.00 0.00 0.00 9.00 0.01 4.00 17.00 26.10 2.00 0.00 0.01 10.00 13.30 0.10 0.00 1.61 0.00 0.00 0.00 0.90 0.00 0.00 0.00 0.00 3.01 0.00 0.00 0.00 0.00 4.00 0.00 0.00 7.01 12.80 48.00 65.50 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 2.20 0.10 0.00 0.01 0.01 0.00 1.00 0.02 10.20 2.90 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.01 0.01 1.01 54.00 0.00 0.00 0.00 4.00 0.00 0.41 3.00 14.41 0.00 0.00 0.00 11.10 63.00 0.00 0.00 0.00 0.00 0.00 0.00 5.00 43.00 0.03 0.01 0.02 18.01 5.10 5.00 0.01 0.00 0.01 0.00 0.00 0.91 0.41 0.00 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.10 0.00 7.00 0.50 0.01 5.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 5.00 0.00 24.10 0.02 5.01 0.00 4.01 0.12 2.10 0.00 0.00 15.00 73.60 0.01 0.00 0.01 0.03 0.00 0.00 0.00 0.00 0.10 7.01 26.70 0.00 0.01 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 28.01 31.30 0.00 0.00 0.00 0.00 0.00 0.00 7.01 2.11 0.01 0.01 1.30 14.40 32.20 2.10 0.11 10.00 5.01 0.00 0.00 0.02 0.00 0.00 0.00 0.00 2.01 0.20 0.00 0.00 0.00 0.00 0.00 0.00 5.20 6.41 0.11 3.00 0.01 0.00 0.10 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.01 0.00 0.00 0.00 0.00 0.00 5.00 0.00 0.01 5.00 10.10 0.00 0.00 1.00 0.50 8.00 0.00 0.31 16.30 0.00 0.00 2.01 4.11 0.00 0.00 0.00 0.00 0.00 1.00 25.30 0.00 0.00 0.00 0.00 0.00 0.00 10.00 0.00 0.01 0.00 0.00 4.30 12.60 0.00 0.00 0.00 0.50 0.00 3.10 24.10 0.81 0.00 1.12 0.00 12.00 1.11 5.00 1.11 1.00 3.10 0.00 0.00 0.01 0.00 0.00 0.00 0.00 4.20 0.00 0.00 0.00 0.01 0.00 0.51 1.50 0.60 0.70