[gradsusr] error compiling gd library

Fri Jul 9 15:35:32 EDT 2010

Hello John,

I trying to compile libdap-3.7.8 library, according to the grads
instructions, I changed the line this 136 in the configure.ac:

136    libdap_pkgconfig_libcurl=yes

By this other:

136    libdap_pkgconfig_libcurl=no

And then run this command:

# autoreconf

configure.ac:73: error: AC_REQUIRE: circular dependency of AC_GNU_SOURCE

gl/m4/extensions.m4:19: AC_USE_SYSTEM_EXTENSIONS is expanded from...

../../lib/autoconf/specific.m4:310: AC_GNU_SOURCE is expanded from...

gl/m4/gnulib-comp.m4:21: gl_EARLY is expanded from...

configure.ac:73: the top level

autom4te: /usr/local/bin/m4 failed with exit status: 1

aclocal: /usr/local/bin/autom4te failed with exit status: 1

autoreconf: aclocal failed with exit status: 1

I think these messages aren’t good. How can I fix that?

Please help,

Best regards,

Huber Paul Gilt Lopez

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: viernes, 09 de julio de 2010 12:10
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Hi Huber,

You just found a bug in the libxml2 library. Go to line 2338 of encoding.c,
e.g.

vi +2338 encoding

And change the word ‘xlattable’ to ‘unicodetable’

John

John Huddleston, PhD

Cooperative Institute for Research in the Atmosphere

From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org]
On Behalf Of Huber Paúl Gilt López
Sent: Friday, July 09, 2010 10:26 AM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

Hello John,

I’m trying to compile xml2 library, but after I applied this commands:

#./configure --disable-shared \
--prefix=$HOME/supplibs/src/libxml2-2.6.16
#make 

I found these 2 errors. I think this variable or function “xlattable” is not
defined.

How can I fix these two errors?

gcc -DHAVE_CONFIG_H -I. -I. -I. -I./include -I./include -D_REENTRANT -g -O2
-pedantic -W -Wformat -Wunused -Wimplicit -Wreturn-type -Wswitch -Wcomment
-Wtrigraphs -Wformat -Wchar-subscripts -Wuninitialized -Wparentheses
-Wshadow -Wpointer-arith -Wcast-align -Wwrite-strings -Waggregate-return
-Wstrict-prototypes -Wmissing-prototypes -Wnested-externs -Winline
-Wredundant-decls -MT encoding.lo -MD -MP -MF .deps/encoding.Tpo -c
encoding.c -o encoding.o

encoding.c: In function 'UTF16LEToUTF8':

encoding.c:418: warning: cast increases required alignment of target type

encoding.c: In function 'UTF8ToUTF16LE':

encoding.c:500: warning: cast increases required alignment of target type

encoding.c: In function 'UTF16BEToUTF8':

encoding.c:655: warning: cast increases required alignment of target type

encoding.c: In function 'UTF8ToUTF16BE':

encoding.c:741: warning: cast increases required alignment of target type

encoding.c: In function 'ISO8859xToUTF8':

encoding.c:2338: error: 'xlattable' undeclared (first use in this function)

encoding.c:2338: error: (Each undeclared identifier is reported only once

encoding.c:2338: error: for each function it appears in.)

encoding.c: At top level:

encoding.c:2998: warning: string length '688' is greater than the length
'509' ISO C90 compilers are required to support

encoding.c:3108: warning: string length '624' is greater than the length
'509' ISO C90 compilers are required to support

make[2]: *** [encoding.lo] Error 1

make[2]: Leaving directory `/home/huber/grads/supplibs/src/libxml2-2.6.16'

make[1]: *** [all-recursive] Error 1

make[1]: Leaving directory `/home/huber/grads/supplibs/src/libxml2-2.6.16'

make: *** [all] Error 2

Please help me,

Best regards,

Huber

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: jueves, 08 de julio de 2010 19:21
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Huber,

The archive library libunits.a is not empty. It is fine.

Copy it to the ${SUPPLIBS}/lib area and move on.

BTW, if you have the gcc compiler on your system, then 'export CC=gcc' and
start over.

e.g. 'gcc --version' send me the results ...

John

  _____  

From: gradsusr-bounces at gradsusr.org [gradsusr-bounces at gradsusr.org] On
Behalf Of Huber Paúl Gilt López [huber.gilt at igp.gob.pe]
Sent: Thursday, July 08, 2010 3:45 PM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

Hello John,

Do a ‘ar tv libudunits.a’, you should see something like

rw-r--r-- 1000/1000  16568 Jul 27 10:02 2009 utlib.o

rw-r--r-- 1000/1000   7524 Jul 27 10:02 2009 utparse.o

rw-r--r-- 1000/1000  14272 Jul 27 10:02 2009 utscan.o

rw-r--r-- 1000/1000   1136 Jul 27 10:02 2009 udalloc.o

Yes, I do. And I see:

# ar -tv libudunits.a

rw-r--r--     0/     3  74480 Jul  8 15:47 2010 utlib.o

rw-r--r--     0/     3  18232 Jul  8 15:47 2010 utparse.o

rw-r--r--     0/     3  45144 Jul  8 15:47 2010 utscan.o

rw-r--r--     0/     3   5328 Jul  8 15:47 2010 udalloc.o

If you have all four then you’re good to go.  

Yes, I have but I think all four is empty.

Copy it to ${SUPPLIBS}/lib, copy etc/udunits.dat to ${SUPPLIBS}/etc

I think this is not match.

You are getting an error on creating udunits executable.  

I think this is match.

If the four objects are not in the libudunits.a file, cd into the lib
directory, and try compiling by hand:

cc -c -O -I../port/misc -I../port/cfortran
-DUT_DEFAULT_PATH='"${SUPPLIBS}/etc/udunits.dat"' *.c 

I tried, but I think this is not complete well.

#cc -c -O -I../port/misc -I../port/cfortran
-DUT_DEFAULT_PATH='"${SUPPLIBS}/etc/udunits.dat"' *.c 

(Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler,
ignored.

udalloc.c:

utlib-1.11.7.nof77intfc.c:

"utlib-1.11.7.nof77intfc.c", line 1488: warning #2177-D: function

          "CopyCtorNode" was declared but never referenced

  CopyCtorNode(node)

  ^

"utlib-1.11.7.nof77intfc.c", line 1520: warning #2177-D: function
"AssignNode"

          was declared but never referenced

  AssignNode(to, from)

  ^

utlib.c:

"utlib.c", line 1488: warning #2177-D: function "CopyCtorNode" was declared

          but never referenced

  CopyCtorNode(node)

  ^

"utlib.c", line 1520: warning #2177-D: function "AssignNode" was declared
but

          never referenced

  AssignNode(to, from)

  ^

utparse.c:

"utparse.y", line 386: warning #2175-D: subscript out of range

        yypv = &yyv[-1];

                   ^

"utparse.y", line 387: warning #2175-D: subscript out of range

        yyps = &yys[-1];

                   ^

"utparse.y", line 405: warning #2177-D: label "yynewstate" was declared but

          never referenced

        yynewstate:

        ^

utscan.c:

then type ‘make’ and it should update the libudunits.a file.

I done, but I think libudunits.a library is still too small.

# make

ar rcuv libudunits.a utlib.o utparse.o utscan.o udalloc.o

r - utlib.o

r - utparse.o

r - utscan.o

r - udalloc.o

case "" in \

        '') ;; \

        *)  ar rucv libudunits.a ;; \

        esac

ranlib libudunits.a

# du -sk libudunits.a

144     libudunits.a

Go to the ../udunits directory and edit the Makefile to remove the –R option
arguments, exit the editor, and type make, or manually

cc -o udunits -O udunits.o –L../lib -ludunits -lm –L../port/misc -ludport
-lm

I did the manually form, then I type these commands but I have the same
problem.

# cd ../udunits

# cc -o udunits -O udunits.o –L../lib -ludunits -lm –L../port/misc -ludport
-lm

cc -c -O -I../lib -I../port/misc  udunits.c

(Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler,
ignored.

cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib
-L/data/hoop/udunits-1.11.7/src/lib -ludunits
-R/data/hoop/udunits-1.11.7/src/port/misc
-L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm

(Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler,
ignored.

(Bundled) cc: warning 901: unknown option:
`-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation.

(Bundled) cc: warning 901: unknown option:
`-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online
documentation.

ld: Can't find library for -ludunits

Fatal error.

make[1]: *** [udunits] Error 1

make[1]: Leaving directory
`/home/huber/grads/supplibs/src/udunits-1.11.7/src/udunits'

make: *** [program] Error 2

And also I remove –R option arguments. Then make output were:

make[1]: Entering directory
`/home/huber/grads/supplibs/src/udunits-1.11.7/src/udunits'

cc -o udunits -O udunits.o -ly -lm

(Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler,
ignored.

ld: Unsatisfied symbol "utIsTime" in file udunits.o

ld: Unsatisfied symbol "utInit" in file udunits.o

ld: Unsatisfied symbol "utCalendar" in file udunits.o

ld: Unsatisfied symbol "utScan" in file udunits.o

ld: Unsatisfied symbol "utTerm" in file udunits.o

ld: Unsatisfied symbol "utConvert" in file udunits.o

ld: (Warning) Unsatisfied symbol "yyparse" in file /usr/lib/hpux32/liby.so

ld: Unsatisfied symbol "utPrint" in file udunits.o

1 warnings.

7 errors.

make[1]: *** [udunits] Error 1

make[1]: Leaving directory
`/home/huber/grads/supplibs/src/udunits-1.11.7/src/udunits'

make: *** [program] Error 2

If it possible to have the equivalent commands with gcc compiler, the
libudunits.a is still too small

I don’t know what is going on with compilation with libudunits library, do
you have extra information or tips

about the process of compilation in gcc o cc?

Thanks you, Very much

Huber

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: jueves, 08 de julio de 2010 14:55
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Hi Huber, it is a small file,

Do a ‘ar tv libudunits.a’, you should see something like

rw-r--r-- 1000/1000  16568 Jul 27 10:02 2009 utlib.o

rw-r--r-- 1000/1000   7524 Jul 27 10:02 2009 utparse.o

rw-r--r-- 1000/1000  14272 Jul 27 10:02 2009 utscan.o

rw-r--r-- 1000/1000   1136 Jul 27 10:02 2009 udalloc.o

If you have all four then you’re good to go.  

Copy it to ${SUPPLIBS}/lib, copy etc/udunits.dat to ${SUPPLIBS}/etc

You are getting an error on creating udunits executable.  

If the four objects are not in the libudunits.a file, cd into the lib
directory, and try compiling by hand:

cc -c -O -I../port/misc -I../port/cfortran
-DUT_DEFAULT_PATH='"${SUPPLIBS}/etc/udunits.dat"' *.c 

then type ‘make’ and it should update the libudunits.a file.

Go to the ../udunits directory and edit the Makefile to remove the –R option
arguments, exit the editor, and type make, or manually

cc -o udunits -O udunits.o –L ../lib -ludunits -lm –L ../port/misc -ludport
-lm

John

John Huddleston, PhD

Cooperative Institute for Research in the Atmosphere

From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org]
On Behalf Of Huber Paúl Gilt López
Sent: Thursday, July 08, 2010 1:19 PM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

Hello John,

Thanks you for your help, I’ve compiled libgb.a library and also jasper,
g2clib, and szip, but I can’t compiled udunits library. I get the following
error:

cc -o udunits -O udunits.o -R/data/hoop/udunits-1.11.7/src/lib
-L/data/hoop/udunits-1.11.7/src/lib -ludunits
-R/data/hoop/udunits-1.11.7/src/port/misc
-L/data/hoop/udunits-1.11.7/src/port/misc -ludport -ly -lm

(Bundled) cc: warning 922: "-O" is unsupported in the bundled compiler,
ignored.

(Bundled) cc: warning 901: unknown option:
`-R/data/hoop/udunits-1.11.7/src/lib': use +help for online documentation.

(Bundled) cc: warning 901: unknown option:
`-R/data/hoop/udunits-1.11.7/src/port/misc': use +help for online
documentation.

ld: Can't find library for -ludunits

Fatal error.

make[2]: *** [udunits] Error 1

make[2]: Leaving directory
`/home/huber/grads/supplibs/src/udunits-1.11.7/src/udunits'

make[1]: *** [program] Error 2

make[1]: Leaving directory
`/home/huber/grads/supplibs/src/udunits-1.11.7/src/udunits'

make: *** [udunits/all] Error 1

But I saw that I have the libunits.a library, but I think it isn’t complete
because it’s so small.

How can I resolve this error?

# ls lib/libudunits.a

lib/libudunits.a

# du -sk lib/libudunits.a

144     lib/libudunits.a

Please help me,

Best regards, 

Huber

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: jueves, 08 de julio de 2010 9:54
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Hi Huber,

The /usr/local/lib/libpng.la controls which PNG library is used. It seems as
if someone else built and installed version 14 under /usr/local.

Unless you have sudo privlileges you are going to have to work around that
implementation.

This is going to sound funny..but; if you have already built the GD library
file that’s all you need to continue building.

In my case, the path is
/home/dasilva/src/supplibs-2.1.0/i686-pc-linux/lib/libgd.a 

In your case copy the libgd.a to your $(SUPPLIBS)/lib directory and copy the
include files

gd.h gdfx.h gd_io.h gdcache.h gdfontg.h gdfontl.h gdfontmb.h gdfonts.h
gdfontt.h entities.h

to your ${SUPPLIBS}/include directory.

Next, go on to build jasper, g2clib, szlib, etc.

John

John Huddleston, PhD

Cooperative Institute for Research in the Atmosphere

From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org]
On Behalf Of Huber Paúl Gilt López
Sent: Wednesday, July 07, 2010 9:42 AM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

Hi John,

Don’t worry about the difficulty that I’m having, I can’t figure how you
build in or with Cygwin, I suppose it is a heavy work.

Any way, I don’t found any reference with libpng14 in the libgb’s Makefile ,
but I found the following lines that 

I think it would be not setup for the libpng12. How can I setup this
Makefile in order to use the libpng12 library, and so try to compile the gb
library? (I’m attaching the libgb’s Makefile)

LIBPNG12_CONFIG =

LIBPNG_CONFIG = /usr/local/bin/libpng-config   

Please help me,

Best regards,

Huber

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: martes, 06 de julio de 2010 14:30
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Hi Huber, so sorry you are having so much difficulty. You should see the
work I have for the Cygwin build!

Look at your gcc line and you will see the path 

/usr/local/lib/hpux32/libpng14.so

Edit the Makefile, search for libpng14, edit that line and replace it with
the path to your libpng12 file.

John

John Huddleston, PhD

Cooperative Institute for Research in the Atmosphere

From: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org]
On Behalf Of Huber Paúl Gilt López
Sent: Tuesday, July 06, 2010 1:13 PM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

Hello John,

I start to compile all the supplemental libraries; I compiled readline,
ncurses, zlib, libpng and jpeg libraries, but I cant compile gd library.
Because I have the following error:

gcc -g -O2 -o gdparttopng gdparttopng.o  -L/usr/local/lib/hpux32
-L/usr/lib/X11R4 -L/home/huber/grads/supplibs/src/jpeg-6b/lib
./.libs/libgd.a -L/usr/contrib/X11R6/lib /usr/local/lib/hpux32/libXpm.so
/usr/local/lib/hpux32/libintl.so -lX11 /usr/local/lib/hpux32/libjpeg.so
/usr/local/lib/hpux32/libfontconfig.so /usr/local/lib/hpux32/libiconv.so
/usr/local/lib/hpux32/libexpat.so /usr/local/lib/hpux32/libfreetype.so
/usr/local/lib/hpux32/libpng14.so -lz -lm

ld: Unsatisfied symbol "gdImageCreateFromGd2Part" in file gdparttopng.o

ld: Unsatisfied symbol "png_check_sig" in file ./.libs/libgd.a[gd_png.o]

2 errors.

collect2: ld returned 1 exit status

make[2]: *** [gdparttopng] Error 1

make[2]: Leaving directory `/home/huber/grads/supplibs/src/gd-2.0.34'

make[1]: *** [all-recursive] Error 1

make[1]: Leaving directory `/home/huber/grads/supplibs/src/gd-2.0.34'

make: *** [all] Error 2

Who can I setup the correct path for the libpng1.2 library, because I follow
the instructions in the PDF, and I executed the following commands:

cd gd-2.0.34
./configure --disable-shared \
--with-png=$HOME/supplibs/src/libpng-1.2.18 \
--with-jpeg=$HOME/supplibs/src/jpeg-6b \
--prefix=$HOME/supplibs/src/gd-2.0.34
make

Please help me,

Best regards,

Huber

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: viernes, 02 de julio de 2010 12:20
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Hi Huber,

Did you remove the libpng directory, untar libpng again, configure again
with the options specified in Building_GrADS.pdf, and make the system?

Ditto for the GD build.

You must follow the order of the build as shown in the PDF file.

John Huddleston, PhD, PE

  _____  

From: gradsusr-bounces at gradsusr.org [gradsusr-bounces at gradsusr.org] On
Behalf Of Huber Paúl Gilt López [huber.gilt at igp.gob.pe]
Sent: Friday, July 02, 2010 11:06 AM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

Hello John,

I’ve done your instructions and also I compiled the zlib-1.2.3 library and I
have the library libz.a, in supplibs/lib. 

And I have the same problem in libpng-1.2-18 compilation.

What is going on with libpng library if I have the libz.a library in the
folder supplibs/lib?

(In the end I list the compiled libraries)

Please help me,

Best regards.

Huber Paul Gilt López

# pwd

/home/huber/grads/supplibs/lib

# ls

libcurl.a      libhdf5_hl.a   libncurses.a   libreadline.a  libxdr.a

libdf.a        libjpeg.a      libnetcdf.a    libsz.a        libz.a

libhdf5.a      libmfhdf.a     libpng12.a     libudunits.a

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: viernes, 02 de julio de 2010 9:30
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Hi Huber, On June 15th I sent you a PDF on how to build GrADS, please look
it over,

 libpng doesn't build because you do not have the zlib.

Get zlib from
<ftp://grads.iges.org/grads/Supplibs/2.0/src/zlib-1.2.3.tar.gz>
ftp://grads.iges.org/grads/Supplibs/2.0/src/zlib-1.2.3.tar.gz

tar xvfz ./tarfiles/zlib-1.2.3.tar.gz 
cd zlib-1.2.3/
./configure --prefix=$HOME/supplibs/src/zlib-1.2.3
make
make install
cp ./lib/libz.a $HOME/supplibs/lib
mkdir $HOME/supplibs/include/zlib
cp ./include/zlib.h $HOME/supplibs/include/zlib

John

  _____  

From: gradsusr-bounces at gradsusr.org [gradsusr-bounces at gradsusr.org] On
Behalf Of Huber Paúl Gilt López [huber.gilt at igp.gob.pe]
Sent: Friday, July 02, 2010 8:17 AM
To: 'GrADS Users Forum'
Subject: Re: [gradsusr] error compiling gd library

John,

Because I found this error when I configure PNG library 1.2:

#cd /home/huber/grads/supplibs/src/libpng-1.2.18

./configure --disable-shared
--prefix=/home/huber/grads/supplibs/src/libpng-1.2.18

checking for pow in -lm... yes

checking for zlibVersion in -lz... no

configure: error: zlib not installed

I‘ve exported this variable CC=gcc by this other CC='gcc
-L/home/huber/grads/supplibs/lib -lz', then I’ve done make, and make
install. Provably the libpng12.a library didn’t build well, how I can fix
the previous error when I tried to configure the libpng12 library?

Please help me,

Best regards,

Huber Paul Gilt Lopez

  _____  

De: gradsusr-bounces at gradsusr.org [mailto:gradsusr-bounces at gradsusr.org] En
nombre de Huddleston, John
Enviado el: jueves, 01 de julio de 2010 18:46
Para: GrADS Users Forum
Asunto: Re: [gradsusr] error compiling gd library

Huber

You need the PNG library1.2 not 1.4.  Somehow you've installed a more recent
version of PNG into /usr/local 

Go back to the PNG 1.2 build and do a "make install" to load it into
/usr/local

Otherwise, manually edit the Makefile and change it to point to your
$(SUPPLIBS) PNG area.

John Huddleston

  _____  

From: gradsusr-bounces at gradsusr.org [gradsusr-bounces at gradsusr.org] On
Behalf Of Huber Paúl Gilt López [huber.gilt at igp.gob.pe]
Sent: Thursday, July 01, 2010 4:15 PM
To: 'GrADS Users Forum'
Subject: [gradsusr] error compiling gd library

Hello,

I want to compile the gd library, i used this command, but I have an
unsatisfied symbol. How can I include these missing symbol?

#cd /home/huber/grads/supplibs/src/gd-2.0.34

#./configure --disable-shared\

 --with-png=/home/huber/grads/supplibs/src/libpng-1.2.18\

 --with-jpeg=/home/huber/grads/supplibs/src/jpeg-6b\

 --prefix=/home/huber/grads/supplibs/src/gd-2.0.34

#make

gcc -g -O2 -o gdparttopng gdparttopng.o  -L/home/huber/grads/supplibs/lib
-L/usr/local/lib/hpux32 -L/usr/lib/X11R4
-L/home/huber/grads/supplibs/src/jpeg-6b/lib ./.libs/libgd.a
-L/usr/contrib/X11R6/lib /usr/local/lib/hpux32/libXpm.so
/usr/local/lib/hpux32/libintl.so -lX11 -ljpeg
/usr/local/lib/hpux32/libfontconfig.so /usr/local/lib/hpux32/libiconv.so
/usr/local/lib/hpux32/libexpat.so /usr/local/lib/hpux32/libfreetype.so
/usr/local/lib/hpux32/libpng14.so -lz -lm

ld: Unsatisfied symbol "png_check_sig" in file ./.libs/libgd.a[gd_png.o]

1 errors.

collect2: ld returned 1 exit status

make[2]: *** [gdparttopng] Error 1

make[2]: Leaving directory `/home/huber/grads/supplibs/src/gd-2.0.34'

make[1]: *** [all-recursive] Error 1

make[1]: Leaving directory `/home/huber/grads/supplibs/src/gd-2.0.34'

make: *** [all] Error 2

Please help me,

Best regards,

Huber Paul Gilt Lopez

IGP-Peru

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100709/642c8200/attachment-0003.html 