Problem running GrADS on Ubuntu 9.10

varun murthy varun at CAOS.IISC.ERNET.IN
Thu Jan 7 09:22:14 EST 2010


Hi,
 I was partially able to solve the issue regarding the rendering of the
display window. The display is now rendered only when the display window is
not minimized when the "display" command is entered. However, when the
display window is minimized and then maximized ,it gets blanked out again.

 The ldd on grads is :
    linux-gate.so.1 =>  (0xb7fd9000)
    libX11.so.6 => /usr/lib/libX11.so.6 (0xb7edb000)
    libncurses.so.5 => /lib/libncurses.so.5 (0xb7ea9000)
    libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7e82000)
    libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7d1f000)
    libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7d05000)
    libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb7d01000)
    /lib/ld-linux.so.2 (0xb7fda000)
    libXau.so.6 => /usr/lib/libXau.so.6 (0xb7cfd000)
    libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7cf7000)

When compared to the ldd from your system, this line is missing : "
libxcb-xlib.so.0
=> /usr/lib/libxcb-xlib.so.0 (0xb7ce0000) ". Am I missing a library?

Thanks and Regards,
 Varun.S.Murthy

On Wed, Jan 6, 2010 at 3:18 AM, Jennifer Adams <jma at cola.iges.org> wrote:

> Begin forwarded message:
>
> *From: *"Huddleston, John" <Huddleston at cira.colostate.edu>
> *Date: *January 5, 2010 4:41:30 PM EST
> *To: *"jma at COLA.IGES.ORG" <jma at COLA.IGES.ORG>
> *Subject: **FW: Problem running GrADS on Ubuntu 9.10*
>
> Jennifer, sorry, I still cannot send email to the GrADS list,
>
> Request a ldd on grads from his system. My grads runs on both 8.04 and
> 8.10. Here is my ldd on Ubuntu 8.10,
>
> linux-gate.so.1 =>  (0xb7faa000)
> libX11.so.6 => /usr/lib/libX11.so.6 (0xb7e98000)
> libncurses.so.5 => /lib/libncurses.so.5 (0xb7e68000)
> libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7e41000)
> libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7ce3000)
> libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xb7ce0000)
> libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7cc7000)
> libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb7cc3000)
> /lib/ld-linux.so.2 (0xb7f90000)
> libXau.so.6 => /usr/lib/libXau.so.6 (0xb7cc0000)
> libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7cba000)
>
> Also, ask if Varun has a firewall operating which will block port 6000.
>
> John
>
> John Huddleston, PhD
> Research Associate
> Cooperative Institute for Research in the Atmosphere
> Mail Stop 1375 @ CIRA
> Colorado State University
> Fort Collins, CO 80521
> 970-491-8602
>
> *From:* GRADSUSR at LIST.CINECA.IT [mailto:GRADSUSR at LIST.CINECA.IT<GRADSUSR at LIST.CINECA.IT>
> ] *On Behalf Of *varun murthy
> *Sent:* Tuesday, January 05, 2010 10:34 AM
> *To:* GRADSUSR at LIST.CINECA.IT
> *Subject:* Problem running GrADS on Ubuntu 9.10
>
> Hello all,
>  I am a beginner, learning to use GrADS. I installed GrADS 2.0 on Ubuntu
> 9.04 and tried out the tutorial available online (
> http://www.iges.org/grads/gadoc/tutorial.html) and everything worked out
> fine.
>
>  I upgraded my Ubuntu installation to 9.10 and repeated the installation
> (place the tar file in /usr/local/bin and extract) using the same tar.gz
> file. But when I ran the display command after running grads, the graphic
> display window remains blank.
>
> Terminal output :
> *ga-> d p  (Where p is one of the variables, defined in the control file)
> Contouring: 0 to 0.0008 interval 0.0001*
> but graphic display window remains blank.
>
> Is GrADS not supported for Ubuntu 9.10? Or are there any libraries that
> need to be installed before GrADS can be run?
>
> *Version Details:*
> 1) Version of GrADS : GrADS 2.0.a7.1
> 2) OS : Ubuntu 9.10 32 bit
> 3) GrADS "q config" output:
> *ga-> q config
> Config: v2.0.a7 little-endian readline printim grib2 netcdf hdf4-sds hdf5
> geotiff
> Grid Analysis and Display System (GrADS) Version 2.0.a7
> Copyright (c) 1988-2009 by Brian Doty and the
> Institute for Global Environment and Society (IGES)
> This program is distributed WITHOUT ANY WARRANTY
> See file COPYRIGHT for more information.
>
> Built Fri Aug  7 14:37:28 MDT 2009 for i686-pc-linux-gnu
>
> This version of GrADS has been configured with the following options:
>   o Built on a LITTLE ENDIAN machine
>   o Command line editing ENABLED
>       http://tiswww.case.edu/php/chet/readline/rltop.html
>   o printim command for image output ENABLED
>       http://www.zlib.net
>       http://www.libpng.org/pub/png/libpng.html
>       http://www.libgd.org/Main_Page
>   o GRIB2 interface ENABLED
>       http://www.ijg.org
>       http://www.ece.uvic.ca/~mdadams/jasper<http://www.ece.uvic.ca/%7Emdadams/jasper>
>       http://www.nco.ncep.noaa.gov/pmb/codes/GRIB2
>       g2clib-1.0.5
>   o NetCDF interface ENABLED
>       http://www.unidata.ucar.edu/software/netcdf
>       netcdf "4.0.1" of Aug  8 2009 03:39:35 $
>   o HDF interface ENABLED
>       http://hdfgroup.org
>       HDF 4.2r3
>       HDF5 1.8.3
>   o Athena Widget GUI DISABLED
>   o OPeNDAP gridded data interface DISABLED
>   o OPeNDAP station data interface DISABLED
>   o GeoTIFF and KML output ENABLED
>       http://www.libtiff.org
>       http://geotiff.osgeo.org*
>
>
> Any help would be greatly appreciated.
>
> Thanks,
>  Varun Murthy
>
>
> --
> Jennifer M. Adams
> IGES/COLA
> 4041 Powder Mill Road, Suite 302
> Calverton, MD 20705
> jma at cola.iges.org
>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gradsusr.org/pipermail/gradsusr/attachments/20100107/d3f530ee/attachment.html 


More information about the gradsusr mailing list